Why a cursor is always indicated on the websites (it's obstacle to navigation)?

Similar Questions

• Why my cursor won't move on the login screen, how to solve this problem?

  Hello, I have a problem connect now. I have an ACER 1420 G, everything works fine but when I boot up it seems normal until it gets to the screen I want to click on my user name, enter my password and login. MY CURSOR is Stuck, frozen, Imoblilized from here and I can't move it to select my user at this point. I can work around this F8 startup and select "disable driver signature enforcement". From there, it is normal, I can move the cursor and it's normal, allowing me to point and click user, enter the password and go from there. I have Windows 7, all my updates on all software including Windows. I would try to avoid reinstalling the OS from scratch. I checked the drivers on the mouse and they say the best choice, up to date and working properly, no way to get it back, either.  System Restore didn't help because once restored, I'll forward installation updates, it gets stuck again... It started last week with the updates to Windows Update on 10/02/15, but I did a stupid thing and turned off the PC for updates in the middle of the installation, THEN I also used SlimCleaner registry cleaner, sometimes delete important data? I use a Logitech mouse M510, which is wireless and it works perfectly. I do not think that the mouse or its interface is the problem. Any suggestions or support at all would be so appreciated. I can't find this problem and especially solutions that work on the web, I have reasearched and Microsoft community was trying to help me too, but no result... Thank you!

  IDigMyAcer,

  Thanks, I realize that it might be a little bit of your time, but I want to assure you that we operate for you. I look forward to the next update.

• Why do all night always go to the first page when it refreshes. It of annoying and you should remember were it is when it refreshes.

  When you read a page, the browser will refresh and go at the beginning of the document, and you must scroll to the place that you read. This happens whenever the browser refreshes. A real PIA.

  Create a new profile as a test to see if your profile is the source of the problems.
  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Why Labview allows a cursor in an indicator?

  Hello

  Why Labview allows the user to position the cursor with the mouse within a digital indicator? The user to believe that just because they can put a slider they should be able to type something and enter data. Is there a way to disable/stop the user to place the cursor in a digital indicator?

  Kaspar says:

  Hello

  Why Labview allows the user to position the cursor with the mouse within a digital indicator? The user to believe that just because they can put a slider they should be able to type something and enter data. Is there a way todisable/Stop the user to place the cursor in a digital indicator?

  Advanced right-click > Enabled States > disabled

  Ben

• Why my cursor always indicates busy?

  Why my cursor always indicates busy?

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the number and the model of mouse you are using?

  ·        Is this a USB to PS2 Mouse mouse?

  ·        Is in any particular application or in general?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: I would say as update you the driver for the mouse and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try to put the computer to boot and then check if the problem is caused by any third-party application:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 link to restore the computer to a normal startup.

• When I "Detach" an attachment and save it elsewhere, why the attachment is always accessible in the mail?

  I use Win 7 Home Premium OS. Thunderbird 31.7.0.
  After "detach" an attachment and save it, the size of e-mail reflects the detachment. However, the size of attachments reflects the size of the original attachment and I can always access inside the TB. After I detach and then right click on the attachment, the 'Detach' and 'Delete' options are grayed out. Why is this? Is the accessory yet in TB?

  Detach the attachments of the emails means replace the attachment with a link to it in the file system.

• Why my passwords are always deleted when I delete my cookies even when I leave the clear saved passwords box unchecked?

  Why my passwords are always deleted when I clear my cookies and history even when I leave the clear saved passwords box unchecked?

  It happens whenever I have erase my cookies etc.

  May be your unsaved preferences.

  • https://support.Mozilla.com/kb/preferences+are+not+saved
  • https://support.Mozilla.org/en-us/KB/password-manager-remember-delete-change-passwords
  • https://support.Mozilla.org/en-us/KB/usernames-and-passwords-are-not-saved

• MacBook Pro, Ex Capitan 10.11.4. When I write an e-mail message and try to add an attachment, why he always opens in the message?

  MacBook Pro, Ex Capitan 10.11.4. When I write an e-mail message and try to add an attachment, why he always opens in the message?

  Easily decodable spare part is open as a convenience to you.

  Depending on your settings, they may be on the receiver either online or at the end of the message.

  According to the e-mail of the receiver settings, they can be opened and displayed and shown as a blob of attachment.

• Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Hello

  Thanks for posting your question in the Microsoft community.

  I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.

  It would help if you could answer these questions.

  a. what version of Windows is installed on the computer?

  b. don't you make changes to the computer before the show?

  I suggest you check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if you need more assistance.

• Vista, why my cursor jumps around on the screen without reason?

  Vista, why my cursor jumps around on the screen without reason?

  You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Document is always displayed on the console of the University Complutense of MADRID, even once it is checked by "archiving". Why?

  I have archived the documents by using the "Check in" present in the Administration Panel. Even after having obtained archived documents are always be displayed if searched on the console of the ECM and their status is displayed as "liberated." That's why it would be even shown in the portal.

  The main objective is to empty space by archiving the content so that the space can still be used.

  Why is it shown? Y at - it another way to archive so that it doesn't get displayed if searched in the console of the Complutense University of MADRID and he leaves the space by getting archived?

  Just to eliminate the obvious, when you start Actions - export... There's an option: "remove the revisions after archive successful". It has been verified? And if so, successful export has?

• Flash Player stops working when the computer is restarted. Why? It is always enabled.

  Why is Flash Player stops after restarting the computer to work? I have download Flash Player several times a day. Norton is the cause? When I re - download, I get a message that I have not sufficient user privileges, but it solves the problem, anyway!

  Unlocker is my go - to for fixing the files in this State.  It is probably easier to do it manually: Unlocker - free download and software reviews - CNET Download.com

  That said, the permissions being stripped on files is a symptom, not a cause.  You might get away with the lock and blowing these files and things will work normally after that.

  The point I want to drive home, it is that it would be smart to take advantage of the opportunity to save something essential.  You could just as easily be the first signs of catastrophic disk failure.  Having lost my share of data that has not been backed up, I always count these early warnings as gifts and take seriously at this point.  There are many good solutions free/good market online (especially if you don't have a lot of data that you really care), as well as traditional approaches to removable disk.

• I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  The path of the file is the full description where the file is located in the language of the operating system, including drive, directory and file name and extension.

  

  In the above example, the file path combines the two circled items-"E:\Webpix" and "BleedingHeart.JPG", the path to the file would be "E:\Webpix\BleedingHeart.JPG".  If you do not have an equal sign in the name of the file, you must have one in the folder or the equivalent.

• Since the installation of Windows 10 why I looking for recently downloaded messages in the Inbox? Before, they came always located at the top.

  I don't know if it's really a problem with Windows 10, but I never experienced it until after the recent upgrade of my operating system. Before the upgrade, new e-mail messages were always displayed at the top of the Inbox window, and I didn't have to scroll down to find them. Now, the newly downloaded messages no longer appear at the top, and I have to search for them after downloading.

  Click the heading labeled DATE sort by date. Click on DATE again to reverse the sort.

• Why Firefox always opens with the last session tabs?

  When I open firefox always opens with the last session tabs? How can I solve this problem?

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them are .html, .ini and .js, .txt, so you can see only file name without the file extension.
  You can see the type of actual file (file extension) in the properties of the file via the context menu in Windows Explorer.