Microphone no Audio recording

Similar Questions

• Never used front microphone input, correct Recorder window, no audio output.

  Sound input tape recorder going nowhere, an acoustic window is supposed to open, it does not work.

  There is a software that is missing in my computer portable pavilion g7.  Its media player is fine, its internet

  is fine, don't you miss that sound comes from the microphone input.  The sound recorder window is open and the

  record bar is moving because the entry varies, how do I get the sound to the speakers.  Never used this

  the option before, it might be defective from the factory.

  Problem solved.  You can not turn on computer with the microphone or other audio cable.

  If the computer does not meet the entries, you must connect the microphone or audio

  cable after connection and then a window will open allowing you to select the default entry.

• Satellite L650: How to use the microphone jack to record audio player

  How can I use the microphone to the input and the audio recording from a record player or a tape using the output of the headphone jack of the player?

  Output audio to the speakers is OK but record is severely distorted.
  OED017 of computer L650.

  Hello

  Taking microphone does not support line-in entry that allows to record the audio stream to a device.

  You can use the external microphone to record Mono sounds in your applications. It also allows to issue voice commands for applications that support these functions.

• Microphone is not record audio (my voice) during the recording of videos!

  So, today I went to check on some of my video files to modify and at their reading, I heard no noise. I was confused by this because in the past, my microphone was fine and should record audio without a problem. But all of a sudden it stopped working at all, at least for the record there. When I'm in Skype calls, my microphone seems to work because I can be heard. But when I try and save, my microphone is not working. I record with Fraps and tried a lot of different options within the system itself. I tried "His file Win7" stereo and surround, and two of them did not work. I even went to Skype call testing service to see if my microphone still worked, and when it reproduces the audio I could hear myself using the microphone. Please help me because I don't know what the problem is!

  Edit: Forgot to say that I tried to record with no microphone but the eternal mic and I have all his be picked up when recording, but when I tested it with Skype, I could hear audio.

  Re Edit: So I tried later and tested with my microphone and could not hear any audio, but when I used the computer's microphone, I could hear audio! So that leads me to believe that my mic is broken, but I can't be sure.

  Hello

  First I want to apologize for the delay in responding.

  Here, in this scenario, this could be a problem with the hardware or driver issues. I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter audio recording and check if the problem persists. See the following article to run the troubleshooter in Microsoft Help.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Try to install the latest audio drivers, including drivers for the chipset and check if it works for you.

  See the following Microsoft Help article to update the drivers for hardware that does not work correctly.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If the problem persists, then it would be best to contact the manufacturer of equipment computer for more help on this issue.

  Please reply with the status of the issue so that we can better help you.

• Microphone not recognized "an audio recording device is not found."

  Original title: Microphone System

  Hiya,

  I am grateful to this avenue. Please, I'm using a Hp Pavilion g6, and the microphone does not work.

  Only, I discovered the problem about a week ago, when I tried recording via "sound recorder". It opens not cos it says "an audio recording device is not found."

  I tried upgrading audio drivers in Device Manager, but he says that they are up-to-date. When I right click on the speaker icon in the bar of tasks and open to recording devices, "no audio device is installed" is displayed under the disabled show the loggers tab. are active. The operating system is windows 8. Please, how can I solve this problem. Kindly guide me as if you are teaching how a toddler. Thank you

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. What is the status of the microphone in Device Manager?
  2. Are there updates pending?

  The question can be caused either because of its pilot is missing, damaged, outdated or it could be a hardware problem.

  Please try these methods below to diagnose the cause of the road.

  Method 1: Run the troubleshooters.

  I suggest to connect the microphone in the same port and try to run these convenience store to diagnose the problem.

  Step 1: Run audio troubleshooter.

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with audio.

  Follow the steps to run the Troubleshooter:

  1. Press the keys Windows + C on your keyboard to show the charms bar.
  2. Troubleshooting type, and then click Troubleshooting under settings.
  3. Now select Search and solve problems.
  4. Select troubleshoot Audio playback.
  5. Follow the steps prompted to solve this problem.

  Step 2: Use the hardware troubleshooter.

  The convenience store is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  1. Connect the devices to the computer.
  2. Press Windows + W on the keyboard.
  3. Troubleshooting type in the "search" tab and press enter.
  4. Click on display all in the left panel.
  5. Click hardware and devices, new window will popup.
  6. Follow the instructions on the screen.

  If the problem persists, follow method 2.

  Method 2: Check the Microphone State.

  Check the status of the Microphone in the Device Manager and the steps to see the Microphone in Device Manager are:

  1. Press the Windows key on the keyboard.
  2. Type run.
  3. In run window type devmgmt.msc.
  4. In the search for a Device Manager window for Microphone.
  5. Check if there is no exclamation point on them or not.

  Method 3: Check the status of micro.

  1. Make a right click on the speaker icon at the bottom right of the taskbar.

  2. Check if the microphone is on it.

  3. If not, configure it.

  Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Siri and audio recording does not

  Hello

  the audio recording with my front camera does not work and Siri cannot hear what I say.

  All the other stuff that needs a microphone works perfectly and I installed the latest version of IOS

  Hope someone has an answer to this problem

  Vanessa

  Hello

  Try following the steps outlined here:

  • Get help with microphones on your iPhone, iPad and iPod touch - Apple Support
  • Siri to use on your iPhone, iPad or iPod touch - Apple Support  (see 'Get help').

• 3.5 mm microphone does not record, VIsta 64

  I'm having a problem getting my new 3.5 mm microphone to work properly. The microphone is plugged in correctly in either taking rose in the back or the front of the case, but no sound is recorded. I checked the menu sounds through "Manage Audio devices" in the control panel and Yes, the green bars are moving. All levels are up, nothing is cut. I looked in the Realtek Audio Manager and the recording level is maxed out as well. The only thing that is cut is the Volume of reading to the Realtek program (reactivate this only causes the microphone continuously power the speakers and has no record effect). I checked several programs (steam, Windows Sound Recorder, Teamspeak, Mumble) and bars green all spend in each, but still no sound is transmitted. The microphone was working on a Skype test call, it worked on another computer, and I used USB microphones without problem on this machine before, so I'm fairly certain that this is not a hardware problem. Please help, I can't find anything else that I could turn the sound back on!

  Hello

  What is the make and model on the microphone?

  Step 1: You can help us fix the article below and check out them.

  Troubleshoot audio recording
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Step 2: Update sound card drivers.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Win 7 Sound recorder-audio recording device is not found

  New installation (new player) to Win 7 Premium 64-bit on Dell XPS 420 Quad Core Hiome.  When I run the sound recorder, it gives an error this audio recording device is not found.  Microphone is plugged into the front socket.  It worked with Vista.  I enabled see the disabled devices and devices disconnected sho.  Any ideas?  I also tried taking back mic.  I scanned for hardware changes.

  I did the things that you mentioned above:

  1.) method 1: Windows 7 responded that he could not identify the problem
  2.) method 2: check the show disabled devices and still no device appears.  He says still no audio device installed under the recording tab.
  3.) method 3: tried to update driver and reports of Win 7 I already have the most up to date driver

  Any ideas?

  There is really no other solution that a better driver for the device.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• A question about examples of Audio recording

  I tried to run the following examples of audio recording:

  https://bdsc.webapps.BlackBerry.com/HTML5/APIs/BlackBerry.media.microphone.html

  I saved the code in an "index.html" and created a simple config.xml to grant access to shared files.

  Successfully, I created the application and deployed on my playbook.

  When I click on the button 'save' on the application, it gives me the following JavaScript alert:

  Record, e: 'undefined' is not an object.

  I did a search and found no related topics.

  Also, I think this may have something to do with using google api.

  I've read about how to add features in the config.xml file, but I can't find a useful example to tell me how do you know where can I find the details of the elements of 'google' function or other places.

  Thank you!!

  Hi cuixu66,

  You need access from domains outside fetures executing javascript in these areas.

  For example, if you had the following piece of code to go with your

  This would mean 'someJS.js' can use the event and call APIs.

  Who is?

• Why my microphone does not record any sound?

  So, I try to activate the sound of material & sound-> Sound-> record, succeed in that, then try to test. And my microphone does not record anything yet (I have the latest drivers), it is a headset and it is not silent. I've reconfigured it, it didn't work.

  So I tried a new micro, it worked too.
  Can you give me an answer to what is happening and how to fix it?

  Hello

  Did you change your computer before this problem?

  Try the following steps to cross check if the microphone is correct.

  a. Click Start, type mmsys.cpl in the search box and press ENTER.

  b. in the sound dialog box, click the recording tab.

  c. click Microphone, and then click Properties.

  Note: Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.

  d. in the properties of the Microphone dialog box, click the custom tab.

  e. turn on or off the amp Microphone check box.

  f. click the levels tab adjust the slider for the volume to the desired level and then click OK.

  g. click OK to close the sound dialog box.

  See also:

  Open the troubleshooting of Audio recording

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Connect one microphone, music player or other audio device to your computer http://windows.microsoft.com/en-US/windows7/Connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Windows 7 Audio Recorder program does not open. Error "Bad device ID or any recording device found...» ».

  Original title: can't get any audio recorder downloaded to work on my windows machine 7

  Recently bought a windows 7 and had my friend machine install windows 7 in there.  I tried to download several audio recorders in my machine, but continue to receive error messages when I open these programs indicating that the bad device ID nor no found recording device.  When I go to control panel-registration there is a microphone and an in-line icon, but nothing else.  It won't let me set up anything he comes.  I'm missing or overlooked something here?  Or do I need to install a sound card to make my downloaded recorders work?  Had an XP machine for 7 years which just crashed and burned two months back and am not true well educated in Windows 7 again!  Any help would be appreciated.  Thank you.

  Ted

  PS: audio cd player works fine and have no touble with Flash Player, youtube, etc. for which is audio.

  Yes, you will need to install the audio drivers for any device you have.

  Re-post with the brand, the name and the exact model of your machine number. If he is the one who made starting from different parts, give sound card or card parent info.

  See you soon,.

  Jerry

• Audio recording of the amplifier to my G6 Pavilion - 2244 has

  I have a Pavilion laptop, G6 - 2244a.  I connected it to my amp via audio tracks that allows me to the sound of reading through the amplifier that works very well.  I got a bunch of audio recording (Adobe Audition) and I want to be able to record audio from my amp directly to my package for registration but all it does record using micro computers, not directly through the audio leads.  I visited HER in control PANEL and selected STEREO MIX, but nothing seems to come through.  I used to have the same game on my desktop that works wonders, doesn't understand why I can't make it work here.  Any help is welcome.

  CDJ400

  Desktop computers come with Line-in, Microphone and speakers. the online help, you can enter the sound. Laptop does not come with the Line-in. It comes with Microphone and speakers. If you want to save, you must connect to the Microphone.

• Audio recorder based on the Web in Flash

  I need to create a web-based audio recorder. I want to record and play audio data in GSM format (for telephony).

  I created the TI in JavaFX that require Java Runtime on the client side

  But Flash is preferred as Flash is everywhere and widely used.

  Is there a way to do this in Flash?

  You should not use FMS. The shared link earlier was one of the examples and you give an idea that is possible through flash. As I said earlier, take a look at the microphone and FileReferece APIs in AS3. Once you are familiar with these and then the following library might be useful for you to reuse or edit them directly: http://www.bytearray.org/?p=1858

• a fusion drive is good for audio recording?

  I think buy a 27-inch iMac for audio recording on Logic Pro X, but is not sure a merger player performance, because some say that the part of the HARD of it on only 5400 RPM drive, if I hold with an iMac HARD 7200 RPM drive?

  You will likely get different opinions, but personally I would not use the fusion drive and recommend an SSD.

  Quite significant speed difference.

• The logic using Soundflower audio recording system

  Let's start with the agreement that I must be a fool.

  I found tutorials on the net for logic audio recording using sound flower and it seems very simple.

  I actually have to make what I want sometimes.

  For the life of me I can't recreate my past successes.

  I'm to the point of madness here.

  I want to just record from Chrome, etc... any audio system, the logic.

  Help, please

  Drew

  1 / set your output to the system on your Mac for soundflower.

  (so now if you play a youtube video or a song on iTunes you won't hear anything - as it is realized in SF).

  2. in line with defined preferences of-> audio-> entry to soundflower

  and something other than control panel the value out of logic (built in output is fine)

  3 / create an audio track and assign to its entrance at Gate 1

  4 / record select the track or you can monitor the track entrance. You should now hear any audio playing on your system (from youtube or iTunes etc) (in fact guarded of logic)

  Press R to save it.