Why am I having so much pain to navigate?

Similar Questions

• Why am I having so much trouble

  I'm not sure what should be posted on board. If it's bad, please move and advise.

  I'm having a lot of problems with a laptop that I bought on EBay and "wiped" and redone with Win 10.  What I have is a Split HP x 2. Because I couldn't have the problems solved, I did a factory restore and uses now wins 8-1. Many problems are met yet. Right now, the big one that I have is as follows.

  Day before yesterday, when the use of the computer, when I went from the side Office app on the side of a block says "switch between applications. Swipe from the edge back to the last app you were using. "suddenly appeared in the left margin and exceeds 6" in the screen.  No matter what I do, I can't get rid of it. It appears in the side of the apps and side office.

  Anyone know how I can get rid of him?

  I have other problems, but they are mainly associated with MS.

  If additional information, like computer info, browser, etc. are necessary, please let me know.

  Any help appreciated.

  @khone

  The problem you describe could be how the parameters are adjusted - in which case you should be able to define the "swipe" your needs - or the settings are already properly adjusted and this issue, too, perhaps is a (broken) honked thing in your Windows file system.

  Some examples of the way things "should work:

  Disable the Swipe in Windows 8.1

  How to enable or disable the tip corners charms in Windows 8 and Windows 8.1

  Discussion on the subject:

  A tile by saying "Switch between applications" is stuck on the left side of the screen - how can I remove it?

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Why my OS took so much space and how can I turn off automatic Back-ups?

  Hi, I'm opperating on Windows Vista Basic Home Edition on top of a HP540 Tower, which has 160 GB hard drive.

  Except for the 20 GB Partition, I stayed with 129 GB to install a fresh on o/s.

  After installing my o/s and updates the 7Gig to clean Documents saved from after installation.

  I was left with 99 Go!

  Something wrong without a doubt!

  Even more, I'm losing memory on my hard drive like there is no tomorrow, 30 GB in 4 days!

  It seems every time I'm streaming videos, or even just to watch videos, an external hard drive.

  I lose about 1 or 2 GB!

  Using a number of antivirus programs, I scanned for a virus, but all programs concluded that the

  the system is clean and that there is no virus!

  This led me to believe that the system backup and restore several coppies of his car, then

  I have used the disk clean up to remove all but the most recent backup file.

  All of a sudden my disk space is increased from 69BG to 99 GB.

  I still don't know what happened to the other Go 20 or 21.

  Although this seems to be a difficulty, with in a few minutes that the backup has been busy writing far still and in

  15 minutes that I had fallen to 97.3 GB and deminuishing.

  Why my OS took so much space and how can I turn off automatic Back-ups?

  Thank you very much!

  Nothing wrong as far as I can see.  A Windows installation will take about 20 GB to 30 GB so it's fine, and you will lose even more space for virtual memory to system management file, hibernation, system restore points file and so on.  Although the "30 GB in four days" is perhaps a little on the high side, considering that you have just installed Windows, there are a lot of household, creating files and so forth go on these days.

  With the help of disk cleanup to delete these files from system restore is a bad choice, because they are created to ensure the security of your system and allow you to recover from any problems that may require them.

  If disk space is as big a problem to get a bigger hard drive and let the system restore to do its job.

• Adobe metadata Muse - I was put in the description, the customer wants to appear in the search through properties of the Page engines > metadata > description and nothing changes. I'm not a coder, that I'm a Designer, that's why I love Muse so much,

  -Metadata I was put in the description, the customer wants to appear in the search through properties of the Page engines > metadata > description and nothing changes. I'm not a coder, I'm a Designer, that's why I love Muse so much, but it is a real problem. any help would be appreciated. I watched the tutorial by Dani Beamount already it was very clear but his does not work for me

  What Miss me?

  That you expect your customer as a 'change' ?

  Google does not use the Description so much more. You can always add it, and it might be useful to other search engines and other purposes. But Google structured content, good keywordsand values a good title !

• What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data?

  What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data? I'm incorporating data of the bar code under a button field. But when the data is large, the problem occurs.

  Apparently the theoretical capacity of the PDF417 barcode is 1850 characters or numbers in 2710. Of course, the actual capacity depends on the size - more square inches, more data. But before the theoretical limit, that you can reach practical limits in scanning technology so test carefully with all models of planned barcode scanner.

• Why Windows backup uses as much space?

  Finally Microsoft released a version of windows that has a simple backup utility. Yes I know the old version of windows has the old app ntbackup, but I'm really, really concerned as to why this version of backup eat by so much space of hard drive on a weekly basis!

  I have Windows backup set up to monitor about 90 GB of data (from about 1.1 to) I'm concerned really, but for some reason, he's chewing in about 8 weeks through all the space on my (used as backup PS3 80 GB) 500 GB external hard drive. If anything, maybe 500 MB of files have changed (in watched folders) during this time!
  When I view the backups there, I see this:
  Duration/size of backup:
  11/11/2009-06/12/2009: 93.91 GB
  06/12/2009-10/01/2010: 293.21 GB
  Thus, between 12/18 and 1/5, this computer was used only from a distance, no new files were created during this period! And I can assure you that I generate more than 500 MB of files during the remaining period of backup! 293GB has been used by backup (automatic weekly backup on Sunday)...
  What Windows backup does exactly? Mute-compress all files without checking to see if they have changed? Binary diffs (you know, style Windows Update)? What?
  How can I see what has been saved without having to browse each file individual zip in the backup folder?

  Hmm.  If it is it seems to backup things that are supposed to not be in the backup, one thing I would check is to make sure that backup is not configured to backup a 'library'... or to check that the libraries are not configured for total content of places you don't want to not be saved.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Why I keep having bombarded with requests to upgrade to windows 10?

  Every day I get the pain of Windows trying to 'upgrade' to windows 10 me

  How can I stop it?

  Why Windows insist on calling it an upgrade.

  It will be just more of my wasted life by learning how to press keys in a different order to be able to do what I already do now.

  Nigel

  Hello Nigel,

  For the first year that Windows 10 is out, he will be free to users with a license for Windows 7 or 8.1.

  If you don't know that you do not want to update then please copy the text following that I have which is in italics below and paste it into Notepad.

  The Publisher of the registry Windows Version 5.00[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Gwx]"DisableGwx"=dword:00000001

  Once you have that then go ahead and save it to your desktop and save it under "block 10" or something like that. ""

  Return to your desktop and locate this file and change the extension from .txt to .reg file

  Save it, and then double-click the file. It is to modify the registry to block the upgrade of Windows 10. I use a lot.

  Thank you

• Error: module is used (so much pain, please help.)

  When I try to load my application to the Simulator for the second time in the javaloader, I get error "module is currently in use". I make sure that the application is not running. And I don't use any persistence etc as some posts have indicated.

  In fact my request is very simple at this point. Everything I've done so far to copy a library I wrote in Java in the application. I'm not still use it yet. My cod file size is 28 k.  My jar file size is 119KB.

  I noticed this article is referenced to explain cases where you would need to reset.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  In this list, is the only category that my application may be

  "Demand is very large and/or contains many files of brother COD, hence the need for some complex binding operations that are only performed during startup".

  How big is big? My size 28 application is large?

  It gives me a lot of pain right now because I need to restart the Simulator every time I need to make a change in the code. It's so painful during development.

  Need to reboot your phone when the application is installed the first time is one thing, but having to restart the Simulator every 3 minutes when you are developing an application is so painful.

  Help, please.

  I found the problem after a long process of elimination of each line in my code by adding until I hit this problem.

  It turned out that I added a listener out of memory when I start the application. When I leave the application, however, I did not remove this listening port. It was the origin of the problem.

  Now I am sure that I withdraw from this listening port when I go out and I don't have this problem more.

• Why the system takes so much hard drive space (about 110 GB)?

  How can I reduce it. I can't imagine why it takes so much space. does anyone have an idea?

  System: T400, bussiness Vista 32

  Hi Halloechen_Wei,

  Probably of rescue and recovery made a bunch of backups that are too much space. I don't remember exactly what we call the option, but if you start the Rescue and Recovery program, there's a way to 'recover space' or something like that. Essentially, you can remove some of the backups to recover the part of hard disk space.

  Good luck

  Frank

• Why should I now so much time to delete the emails?

  As a user of Thunderbird long term very satisfied for the last two weeks Firefox hangs and takes several seconds to delete even a very short email - why?

  Hi Malken.
  Using webmail? Or you use Thunderbird to delete messages?

  A large number of e-mails being deleted can take a bit to remove. I apologise for the inconvenience.

• Why even after having changed the permissions can't write to my files?

  I moved files on "users / shared" on the imac 27 "my father Yosemite retina.  He got last June but was not able to migrate because of her old imac was in Florida and North Carolina.  So, I migrated the old imac again with time machine backup charges a few months after getting the computer.  Now, I'm trying to merge the 'old' on the new computer account with the migrated account 'new', I restored it with time machine from the old imac.  I thought I was smart "passage" large libraries of film and photo of users / shared and that the account migrated from old imac. (on the same computer again) But I have no write permissions for files on the migrated account.  And making matters worse, while I can't write to files, I'm still able to corrupt them trying to change permissions and try to load them with i-movie and what not.  So now, I have a 6 GB corrupted movie library and not backup.  I tried it duplication and corrupt also.

  So my question would be "why is it when I add to the new migration full privileges to user for these files, I always failed to write about them?  Now instead, I wonder if there is a way I can fix the corrupted film library file.  Film - I tried and failed on the double.    I tried available i-movie file to 'all' as well as the addition of the new migrated user full privileges to it.  While I was able to do it without error (it seems to take the changes) or the new migrated user or former user on the new computer can write to the file (i-film library) at this stage.

  Every article help I read says just to click on info and change the privileges for what I did.  So I'm pulling my hair out.

  Hope that I was not too confusing in the way that I want to talk about the two different accounts.

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• What is the purpose of VTEncoderXPCService and why should I use so much CPU?

  As you can see in the image as an attachment, it consumes about 300% of the power of my CPU:

  

  This causes in turn my MacBook Pro CPU to heat and speed up the rotation of the fan.

  What is the purpose of this process? Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  Thank you.

  Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  As you probably know, the conditioned XPCservices which can access the sandbox of a request and securely communicate with him. When you import new media or migrate a photo library, it will create thumbnails and previews of media in the library.  'S done it by background processes began to take photos. These will be run and is same photo is apparently inactive. After the importation of the new media, it is best to keep the pictures running overnight to get background processing as long as you don't need a mac for other tasks.

  VTEncoderXPCService and VTDeoderXPCService convert your videos. If one of them is hogging all processing power, this may mean that you have a lot of videos in your library requiring a conversion or one of your videos is damaged or uses a codec that cannot be treated by pictures. Have you recently to import new videos or migrate a library with videos?

  If a video cannot be treated, remove it from your photo library.  To find the culprit, try to read your videos into pictures.

• Why is-C code so much faster? (Image processing)

  Hello!

  I'm working on a larger application but I reduced to show you a problem I encounter at the beginning. I join all the files needed to run.

  It is simple rgb2monochrome that I implemented in C code algorithm and code LabVIEW. I have not now why the C code is 4 times faster.

  In the code C transfer tables with pointers so I'm working on a given memory area. I thought that LabVIEW can be slower, because it creates unnecessary copies of berries. I tried to solve this problem with Structure elements instead and value reference data but no effect.

  I also tried to change the tunnels in the shift registers in some places (read in optimizing LabVIEW Embedded Applications). I changed options in the execution of the subVIs properties and I created EXE application to see if it will be faster. Unfortunately I can not yet reduce the difference time of execution.

  I know that my algorithm can be better optimized, but this isn't the main problem. Now the two algorithm are implemented in the same way (you can check in cpp file) when it should have a similar execution times. I think I made a mistake in the LabVIEW code, maybe something with memory management?

  And I know more... Maybe nothing wrong with LabVIEW code but something too good in C code ? It is 64 b library, implementation of usual way without forcing the parallelism. Moreover I brand performance in the thread of UI in COLD LAKE. But perhaps nevertheless CPU manages this function with multi hearts? I have 4 cores then the difference in execution time would be good . But it's impossible, right?

  I know that the notice that LabVIEW is sometimes slow, but approximately 15%, not 4 times. So I had to make a mistake... Anyone know what kind of ?

  Kind regards
  ksiadz13

  Well, here are a few things that make faster LabVIEW code, there are other improvements that could be made, but I would need to do several tests to see if they are better based on your input data.  First of all, I would like to enforce the VI Inline, not subroutine.  Also, I'd work with arrays of data instead of scalar values.  Also, you know the number of rows and columns because it is the size of the array, why keep this information?  Oh and if you are working with curls you can try parallel for loops to work on more than one processor at a time.

  And also, I'm not sure that all this work is in any way necessary.  If you have a double and turn it into a U8, it will be 255 If the value was greater than that to start with.  Attached is an updated release with several possible options to try.

  

  Oh and another improvement, why are you even unbundling the data in Unbundle_imageCPU1.vi?  Why not work with this table 2D-Red Green Blue?  I realize that even VI is called in LabVIEW code options both C but with LabVIEW just deal with other data could make faster together.  In particular, in view of the fact that regroup you after you're done anyway.

• Why am I having these connectivity issues 2 days running?... impossiable dailup connection, stops of... LOST?

  Instant Messaging online a second then the entire page is lost, im connected but I'm not getting any connection activity, very very frusrating and b4 are tell me 2 get broadband... its not avaiable in my area, I'm beside the ocean, guess it's the last on the list of the back 4 the telephone company , I can get wide satilite band but cannot afford nearlly 300 dollars a month, dailup so it is... but there are days I just give up try, f.b photo upload a waste of time, says only: loading 4 eva... so why back he seem to b 2 days I lose my service as im payiong 4, but do not receive it... It's just a big waste of my money? was soon sheryl

  Hello

  1. What is the exact error message or error code?
  2 have you made changes on the computer before this problem?

  I suggest you to consult the following Microsoft article and check if it helps.

  Network connections and remote access troubleshooting

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Why windows folder shows size much larger than the actual content

  When I check my Windows folder properties, it shows the size of the folder as 16 GB. But when I open that folder and select all the files (including the hiden files) and then check the properties it shows the total size is 6 GB. Why is there a difference of 10 GB when I check the size of the same folder from these two different places.

  Ashish519,
  Thank you for visiting the Microsoft Answers community forum.

  When you examine the properties of a file, it shows the size of everything in this file, including other folders and files in these folders and folders within folders and files in these folders. etc.  When you open a folder and use "Select all" then select properties and it, it goes only to show the size of all the files in this folder, no subfolders or files in subfolders.

  I hope that answers your question.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.