Why am I not able to use your products in my country, Faroe Islands.

Similar Questions

• Norton and 35 of Firefox are not compatible... I ran Norton Live Update... If Norton is up to date. Why am I not able to use my Norton with Firefox toolbar...

  Why am I not able to run my toolbar on Firefox version 35 Norton. I ran Norton Live update... don't give me good results. I have been using an older version of Firefox... Norton is compatible for a while and all of a sudden become compatible... is not acceptable. I don't usually update FireFox immediately due to problems of this kind in the past, but Firefox likes to take over...

  I'm at the point where I feel like forget Firefox and switch him permanently on explore...

  So frustrating.

  I have the same problem. Norton Support just spent 1.5 hours trying to get v35 to accept it is the latest toolbar (v 2014.7.10.12) on my computer that they - Norton - say IS COMPATIBLE WITH the V35. They suggested that I have than uninstall/reinstall Firefox, which I did. It made no difference.

• WiFi 802.11 b, g, n (2.4 GHz and 5.0 GHz), why is the razr not able to use 5 GHz?

  I was wondering why we are not able to use 5.0 GHz, does make a difference? Totally, I do not know. Maybe you guys can help me. Thank you!

  (please not all values are estimated and not 100% accurate)

  The only advantage on the 5 GHz will be noticed if you're less 1 mtr from the router once you pass the 1mtr threshold you will lose any advantage in speed so your phone will automatically be seleect the 2 GHz band.

  5 GHz bandwidth may push your wifi connection up to 300Mbit while 2 GHz is limited to about 190Mbit

  but on 802.11n distance plasys much of the speed you will actually recive therfore in the case of mobile phones there is no great advantage in the phone, a connection of 5 ghz as if you where to walk away from your router 3mtr aprox you up to 180Mbit in speed is (in my opinion) main reason why phones do not hold a connection of 5 ghz for a long time.

  the 2 ghz range will be a higher speed over a longer distance (this is on 802.11n)

  However if you have an 802. 11 a router then the benefits of the 5gzh is capped at 190mbit however, you can hold a stronger signal over a longer distance compared to 802.11n the problem here is that the routers are configured more to computers and personal computers portable therfore so they droped the 802. 11 a band and open until the speed 802.11n short-range can on long distance, is no great loss because your device will automatically change to load of bands on your remote (this can be demonstrated by your router at 5 GHz to lock if it supports doing so)

  and you will also notice that your razr connect to band 5 GHz in the present case.

  In required short is correct in the statement there is no advantage to 5 GHz running more than 2 GHz.

  I hope this explains a little about your problems.

  Kind regards

  Kristian

• Not able to use acrobat pro in another application using the deck?

  whenever I BridgeTalk.getTargets () in the script toolkit cs6 scope I get this output "soul, bridge, estoolkit, exman, flashbuilder, indesign, standard" here acrobat does not appear this is why I'm not able to use acrobat in indesign scripting

  InDesign version = cs6.

  Acrobat pro version = 11

  What is the solution for this problem.

  I see not a way to cross - automate the two products in this way, because they use different interfaces. Bridge, it's not how you automate Acrobat.

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• I had signed up for acrobat reader Pro and I was not able to use it. Why?

  I had signed up for acrobat reader Pro and I was not able to use it. Why?

  What is your operating system?

  Most likely, you will need to exit the Safari completely process, not simply close the browser window.

  Here's how to contact customer service by chat or phone, but the phone support is limited to the day from Monday to Friday in the United States or your country of residence.

• Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

  Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
  
  So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.

  
  

  If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.

  
  

  I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

  I hope that helps some of you save a whole day unnecessarily.

  Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

• not able to use TKPROF, why?

  I have access to the user_dump_dest directory, and I see these trace files.
  But I'm not able to use TKPROF to display the trace file, why?
  What can I do to make this work?
  

  bash-3.00$ which tkprof
  no tkprof in /bin /usr/bin /sbin /usr/sbin /usr/ucb /usr/etc /etc /usr/local/bin
  bash-3.00$ tkprof
  bash: tkprof: command not found

  TKProf is an executable in ORACLE_HOME. You must set the environment variable oracle base to run tkprof (ORACLE_SID, ORACLE_HOME, PATH etc.)

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28274/SQLTrace.htm#PFGRF01010

  HTH
  Srini

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• Not able to use 4 G network Reliance Jio on iPhone 6

  This cellular network has not been certified by the carrier for LTE on iPhone. Battery life, calls, SMS, voicemail and cellular data may be affected. »

  After going to setting-general-carrier-version is 24.1jio and I am using iOS 9.3.2

  There is still no bar to network and I'm not able to use 4G on the iPhone 6

  Apple model 1549

  Please help as soon as possible

  Help what? This carrier does not support LTE on the iPhone. There is nothing we can do about it. Complain to your carrier.

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• Satellite A100: I am not able to use the keys FN - common module error

  HY,

  I have a toshiba satellite A100 series and I have a problem:
  I'm not able to use the fn functions (for example fn + f9 to turn off the touchpad or fn + f3 to the eve and so on...) and I got an error concerning "common module.

  A dialog box told me that the common module is closed...
  Someone knows this problem?

  I'm sorry for English...

  Thank you

  Hello

  I put t know why this error message and why the common modules stopped working, but to my knowledge, the common modules are needed to run and use the FN keys for example.

  So here is my advice;
  Go to Toshiba's European diver page, choose the common law modules, download, unzip, and reinstall it again!

  After restarting again the FN keys should work again.

  Best regards and good luck

• RN204: TB 2 x 4 and 1 x 2 and 1 x 3 TB - not able to use the full capacity

  OS: 6.4.1

  Hello

  I spent many hours up to now to gather without success. The calculator RAID netgear said 8.16 TB in X-Raid and Flex - Raid 5 with my combination of hard drives, but I'm not able to put in place. As I want to use the encryption I started with a Flex - Raid 5 with 4 hard drives, resulting in a volume< 6="" tb="" (4x="" 2="" tb="" as="" raid="" 5)="" and="" i'm="" not="" able="" to="" use="" the="" capacity="">

  What is the right way to configure the system with full capacity of 8.16 TB (perhaps with several volumes)? I do not know more what to try and to reset the system and let X-Raid decide will not work because you cannot configure X-Raid with encryption.

  I think that to use the entire space, we need something like:

  RAID 5 on all 4 hard drives with 2 TB = 6 TB of usable capacity

  RAID 5 on 3 hard disks with a capacity of 1 TB = 2 TB

  RAID 1 on 2 hard drives with a capacity of 1 TB = 1 to

  But HOW? Don't see no way to add a volume because all HDDs are 'blue', they do not serve at full capacity!

  Here my current situation started with all the devices that have been installed since the beginning (it is not a HARD extended drive configuration).

  

  It is excactly what I expect it works when buying the RN204. But this device is now on its way to Amazon and my new QNAP 431 + initialization of disks now!

  Thanks for all your help!

• Why am I not able to print pictures after having previewed in photo WIndows Media Viewer

  Why am I not able to print pictures after having previewed in photo Windows Media Viewer

  It is a Windows XP forum... you are using WIndows XP?

  I don't know what you call Windows Media Photo Viewer.

  In Windows XP's default Photo Viewer is Windows Picture
  and Fax Viewer... and it has options of printing photos.

  Try right click on a thumbnail of the photo or the name of the file and see if you
  can choose... Open with / Windows Picture and Fax Viewer.
  The print icon located at the bottom of the screen...

  In addition, when you have a photo displayed in the Windows image and
  Fax Viewer... you can type... CTRL + P to print the Photo
  Assistant.

  Also, if you right click on a photo thumbnail or file name of the menu
  should include a print option.