Why are these so difficult basic actions?

Similar Questions

• Why are these networks 0033, livedoor-web, mobilepoint shows on my wireless network connection

  Why are these networks 0033, livedoor-web, mobilepoint shows on my wireless network connection? At Microsoft this downloaded without my knowledge in my laptop in the network connection and the internet? Are these safe to use and that they cause to slow down the internet connection?

  Your wireless network card is just a receiver (transmitter).  As for a 'normal' radio on which you are listening to music, news, sports, etc., your wireless network card will 'listen' to any nearby wireless network and provide you with a list of these networks:

  

  Wireless networks that do not require a security password appear with the icon of the shield, as the "linksys" network in the figure above.

  In general, you should only connect to networks that you know are secure: your own, networks that you know the password, or maybe a public network such as those provided by restaurants and other commercial establishments.

  None of the networks that list you are likely to be public networks.  You will not be able to connect (because you do not know the password) or you should not connect because they might be dangerous.

• Why are these blurry photos?

  I have a Canon Rebel T3i. I took a few pictures of group w/tripod, without tripod, w/flash, no flash, different openings, many on automatic mode. All about the autofocus. All of them come out blurry, especially people on the ends. The joint may seem small ok on this web page, but if download you it and watch it 100% you will see what I mean. I have two cameras T3i and they both give the same results. I'd probably get a better photo with a phone. Any ideas?

  

  dtrachtman wrote:

  The lens is a Canon EF 18-135. Photos taken at 1/8 to 1/250 shutter speeds and F3. 5 - f9.0. Why the fact that the ends are more blurry implies it is a poor quality lens? Should what kind of lens I buy? Thank you

  The 18-135 has a pretty good reputation, but for that you would use it at the wide end. Lenses with a long zoom range (and yours is long enough) tend to be more marked in the middle of their range to the ends. The ends of your group are fuzzy because the sharpness falls off because the topic becomes more distant from the center of the lens. More expensive lenses tend to do a better job to minimize this effect. 1/8 of a second will work normally if you are using a tripod, but it's too slow for this kind of picture, because the subjects will move. I wouldn't use anything slower than 1/160 for group photos, the only exception being if a flash powers most of the light. For group photos, I use the Canon 17-55mm f/2.8 IS usually on a 7 d body. This lens is very good and cheaper than it used to be. If this goal would solve your problem, I don't know. Maybe you could rent or borrow one and try it. Note that while you would always use it at the wide end, he doesn't have to worry about being strong at 135 mm.

• Why are these windows not my data connection - I now have to connect whenever I go to the site

  Why not "remember me".

  Hello

  1 are you referring to the Web site connection references?

  2. what web browser do you use?

  3. this happens with all sites or with any specific Web site?

  4 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the steps in the link.

  Fill in website forms and passwords automatically

  http://Windows.Microsoft.com/is-is/Windows-Vista/fill-in-website-forms-and-passwords-automatically

• Whenever I turn on my computer there is always an icon of "ready to install update" showing. What are these updates and why so many?

  "When I turn off my computer, I have an icon of" ready to install update "in the upper right of the button 'disable' located between the"stand by"and"restart"buttons. In the past, I would occasionally get one of these notices, but now they happen whenever I'm on the computer. What are these updates and why they are so common and if they pose a threat to my computer?

  Hi Michael,

  Try the following.

  Step 1: Check if there is lack of updates.

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. (If any).

  Step 2: reset Windows Update components and then install updates. Visit the following link and click on Fixit.

  How to reset the Windows Update components?

• Discussion questions with rebel eos of cannon during the action of street shootings? Why are my blurry pictures?

  In situations on a tripod or in most other situations my camera and objectives seem to focus well. In a stable situation where the subject does not have many, I simply turn the wheel around the focal point I want the camera to focus on my photos are usually good, but I found that I love street photography and capture people who do things. Sometimes, they are moving toward or away from me. .. I use a wide-angle F2.8 and generally have no worries to keep larger than the focal length shutter speed... I keep the camera autofocus and AWB... So why are both my photos blurry... I don't have time to every shot to lift the unit and turn the wheel to emphasize a particular point if I usually leave a central development... What should I do to get my shots in short without looking through the viewfinder with each stroke?

  Note that the update "AI Servo" difference in mode of development of "One Shot" in terms of what it does when you press the shutter button.

  In "One Shot" mode, the device uses "Focus priority".  This means that the camera will NOT take a hit if the lens is in auto-focus mode until it can confirm that he was able to focus on the selected AF point (or on a Focus point if you let point AF Auto selection) in brief: realize the development is more important than shooting at the precise moment when you press the button.  That's why "focus priority".

  In "AI Servo" mode, the device uses "release priority".  This means that when you press the shutter button completely, the device will take the shot immediately and it will do so if he had time to reach the focus... or not.    In short: capture the shot at the precise moment when you press the shutter button is more important to achieve focus.   That's why "release priority".

  If you quickly press the shutter button to take a picture, the camera will shoot first and development worry later.  You half - press the shutter to allow the device to reach to the point before you fully - press the key.

• Why are all these answerse questions / answers for HOW DO I GET around WINDOWS 7's FILE PERMISSIONS? so old/otdated

  Why are all the questions & answers so old that in 2009-2011 & some in 2012 on the 1 to 12 pages on MICROSOFT WINDOWS from the COMMUNITY in respect of the question ' HOW DO I GET AROUND WINDOWS 7 FILE PERMISSIONS?  I'm sure people still encounter this same problem in 2013 because of course, I'm and worsened. Which means that we are all being denied access to the files that we have and have a right of access. I don't think this can be more clearly stated.  Thanks if you can answer this question. It is dated April 2, 2013

  You do not have any problems, or at least in detail where all permissions question arises, when you do what with what

• Why can't I change the action of double-tap by default for a file extension?

  With Windows XP, it was possible to change the default action for a file 'type' (IE file extension, because Windows 7 has no notion of a file "type" Despite other operating systems supporting these things for the last 20 years).

  Why is it not possible under Windows 7?

  Because it was designed by a guy named 'Me', which obviously has not used a computer or visited planet Earth recently, if ever?

  Why are all the MS support dumb people on this issue?

  Because they would have to admit they lied to their customers when they said Windows 7 was better than XP?

  Its opening called with, no?

  No, it isn't. This isn't what he's talking about.

  Freqy: Try this:

  http://Icrontic.com/Forum/showthread.php?t=85241

  Alternatively, you can try this freeware:

  http://www.NirSoft.NET/utils/file_types_manager.html

• Why are there redundant for Microsoft Security Essentials download sites?

  Original title: Microsoft Security Essentials:

  At the insistence of some other people on this community, I decided to start another thread for this exact same topic:

  Why are there redundant for Microsoft Security Essentials download sites? I went on the first site in my search on the web:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=520

  It looks pretty official to me, however, there is only one problem with the above site. Download options are way too vague for us lay people. After publication on the website of MS Community, I was quickly corrected on my ad which does not seem to be an idle thread and offered a link to download the instructions and frequently asked questions that did not work. Much later, I was offered another site to download with different language options and a more detailed description of download:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-all-versions

  Well, I have to ask the same question again, but in a different way: why society billions of dollars allows this kind of nonsense (multiple and various download sites on the web) occur under their name? Excuse me if I look a little frustrated on this problem, but I am!

  Here's what the site was used initially. I still don't know which version to download for use on this site. The only distinction: "amd64" or "x 86". I don't know looking below that mean both.

  Version:	Date of publication:
  4.4.0304.0	10/11/2013
  Name of the file:	File size:
  ENUS\amd64\MSEInstall.exe	13.0 MB
  ENUS\x86\MSEInstall.exe	10.6 MB

  Download sites are for companies and technicians who need to deploy these.  Basically, the people who understand and who need these details.

  For consumers (users of this community site), the printable page is simply microsoft.com/security_essentials

  Here, you can easily get the version you need.

• Why are my smaller placed images that I expect?

  I am designing a game of cards bridge-size for printerstudio.com in InDesign, and will be given merge in images of a worksheet.  I have 128 photos in photoshop for the Basemaps which are defined in pixels exactly 1122 x 747, the metadata says 300 DPI.

  I create a new document in InDesign and have set the size of the document to 1050 x 675 pixels with a 36 pixel bleed and margin 36 pixel, which puts the total size more bleed to 1122 x 747, which is what I want.  I also tried the same values, except as points.

  When the image of places, it is much smaller than I expect, and well as info link, the properties of the image are 1122 x 747, real and effective 300 PPI, when I measure on the page that it is said that it is 269.28 x 179,28 pt or px, according to what I have to change the preference.  However, if I measure in inches, this is the correct 3.75 by 2.5 nominal without bleeding.

  So obviously the document assumes a 72 dots per inch of resolution and 1 pixel = 1 point, instead of the 300 pixels per inch, I want to be, and it changes the size of image pixel to match the correct size of real thumb.

  I found that I can work this around by setting my document to 3.75 x 2.5 inches, which makes some sense, but I cannot wrap the head around why it behave the way which it doesn't.

  So, why is a document of 1122 pixels x 747 pixels size actually a document of 269,28 pixels 179,28 pixels?  I want just a canvas 1122 x 747 pixels which is completely filled by a picture of pixel 1122 x 747 placed.  Why is it so difficult?

  When you select pixels of your unit, ID maps to a rule unit equal to 1 pt, so your leaders are 72 dpi.

  When you pass, if you save the image at 300 dpi, it also includes a physical dimension which is the number of pixels divided by the resolution. ID reads this physical dimension and use it as a scale of 100%, so your image seems to have been scaled down, but it's the same pixels, crammed into a small space. Scaling upwards or downwards in ID has no effect Watt on information in pixels in the image.

  Pixels have no physical size. If you print your picture on a balloon, you can jump to the top very great, and the number of pixels of the image does not change. Similarly, resolution has no meaning until you put an image in physical form. As jump you the ball the pixels of the image even change resolution in inverse ratio to the amount of expansion. ID works in the physical world. Your pages have 'real' dimensions and you you size content to fit these dimensions as you want.

• Why are my synths distorting?

  Why are my synths distorting?

  Particularly film patches such as erosion and SFX. At first they seem like a lot, but after a while, as I work on the file, they develop distortions, sounds like static.

  The only solution I have found is sometimes I can create a new track from scratch and copy the notes (from the track on distortion) to him - but this does not always work.

  So far, I worked on three projects in a row where this has happened. Once he arrives, he is not resolve, even with a reboot.

  This isn't a question of volume of track or speed level. Its a shame because these sounds are one of the * reasons * I bought Logic Pro X.

  I have a new MacBook Pro with El Capitan.  Processor: 2.5 GHz Intel Core i7, memory: 16 GB 1600 MHz DDR3

  This prevents me from doing what I bought the software and laptop computer for!

  Thank you.

  In the Preferences Audio from Logic that you have ' I/o buffer size' value Logic?

  Also, is it possible that you are overloading the Bus Master, you add audio? Is the master or channel strips being driven into the Red?

• Why are cookies not deleted when I close Firefox?

  Hey,.

  My problem is that I put Tools / Options / Privacy / history to "Use the custom settings for history", then under "cookies", I put keep up to the: to the "closing of Firefox".

  Yet, when I close my browser and restart any of the cookies are deleted. If I register my tabs, I be online on Web sites that are open in the saved tabs. But even if I close the site and then leave. The site, and then reopen after having restarted Firefox, I am always connected. While Firefox is defined do not remember my user name or password, the only way this can happen is through cookies. Therefore, cookies are not deleted. But I can also see it in the list of cookies: it is full of old stuff.

  So why are cookies not deleted despite this setting?

  Firefox has beeen quite soft on the life private lately, and frankly I do not understand why. The possibility of having more than X days History automatically deleted is also long gone, and now this cookie setting does not, either.

  If you reopen tabs automatically next time then Firefox stores cookies from these default tabs as part of session data in the sessionstore.js file.

  • http://KB.mozillazine.org/Session_Restore

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (not HTTPS) on the topic: config page to disable the registration of cookies via session restore.

  The browser.sessionstore.privacy_level_deferred pref is used when you do not reopen last session automatically via "show my windows and tabs from last time" and use the same values.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level
  • http://KB.mozillazine.org/about:config

• Configuration of backups from iCloud drive: why are there two Mobile Documents files?

  I've recently started using iCloud drive to synchronize documents between my Mac and iOS devices. Now, I want to assure you that I have local backups of these documents.

  I understand that the documents synchronized via iCloud are store locally in my Mobile user home/library/Documents folder. But when I check I made 2 folders: Documents Mobile and Mobile Documents.90391253.  The Documents Mobile folder seems to keep all the records that I created using Pages, drafts and TextEdit.  The second folder has files with obscure names such as ' JFJWWP64QD ~ com ~ goodiware ~ GoodReader. ". Records of Documents that I checked are empty.

  Here is a screenshot of the second folder:

  

  Why are there two folders of Documents Mobile? When you add a folder to a backup program, I would add two folders or just the folder Documents Mobile?

  The second folder (the one your screenshot) is a backup of an iPhone, iPad, or iPod Touch, which was made via iTunes. More information: finding and managing your backups iTunes - Apple Support

• Why are there no end process in the Task Manager tab.

  Why are there no end tab process in the Task Manager because it usta be a on windows xp, that makes it eaiser to end a game if you do not want it to start. In addition, some games when you exit out of them sometimes play on words to say (on steam) is currently unavailable. That when I try to log out of steam to get the game to work again, he says "game works must end game before disconnection which is the process you need to put end to which you can't because there is no process tab.

  Hi dontknopass,
  
  a. what game you try to play?
  b. did you a software or hardware changes recently?
  c. normally, you should get a process in the Task Manager tab, end process tab is located at the bottom of the Task Manager window.
  
  Method 1.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42
   
  Method 2.
  Let us see if we can get into safe mode, we can perform a clean boot for troubleshooting.
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2 clean boot
  If you have the tab process end in safe mode you will need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why are there updates as long as there is no place for the programs they update?

  I have a Sony notebook with windows XP operating system. Whenever I turn it on, I have more updates. It got to the point that there is no more space left on the drive C for programs that are updated. Why are updates written so sloppily? Would not take more attention to the space used by these updates? My first computer was a 10 meg hard drive and it works perfectly, now 14 gigs is not enough. Must we have 500 gigs to run windows? Does this reader size filling too in time? Is there a way to provide more space on my hard drive without replace or remove the original programs IE. Windows? Cant I consolidate updates into a lighter version to date of a program without updates? I wonder if a total format would help even at this stage.   HERE COMES UPDATES!

  If you run out of space on the hard drive of your computer, you do not have a large enough hard to meet your needs drive and/or you have not successful space.

  You have posted in forum Windows XP and Windows XP with all updates since the beginning and a Suite of office of your choice and a picture/photo editing application of your choice and alternative browsers of your choice and several Internet Plugins for each of these browsers installed with an assortment of other applications should take between 4.5 GB and 10 GB of disk space.  Which leaves you, with your stuff, the rest of the car in question.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
  (These instructions will be different depending on the version of IE that run you.)

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.

  At the end of the day - a standard installation of Windows XP with all sorts of options is likely not above about 4.5 GB to 10 GB in size. If you have more space than that (probably do on a modern machine) and most seem to be used - probably you must copy * tips * off or find a better way to manage it.