Why aren't my keys PgUp and PgDn working properly?

Similar Questions

• PgUp and PgDn, home, end

  Love my new HP Mini 110 - but frustrated by the lack of keys PgUp and PgDn, end House. I think they exist somewhere, but I have tried the obvious things (Ctrl + up, Alt + down, whatever) and I can't understand it. OK, maybe I'm stupid... or maybe there is really no keys PgUp and PgDn, end House! Anyone who can put me right... ? Thank you.

  Sorry to say, but editor done BIOS goofed on this one.  All (most?) HP Mini - the poor for sure - only what are described as '93 percent"keyboards, which means 'The House', 'End' ' Pg/Up' and" Pg/Dn"keys are omitted.

  The documentation states that "Fn + up arrow" is supposed to be the same work as 'Home' and even 'Fn + down arrow' should be 'End', but they do not work.

  The 210-20XX series uses including BIOS F.02 (at least it's the BIOS for my 210-2072 CL) and it is confirmed that this BIOS does not support the feature key "Fn + arrow".

  I spent hours scouring the internet, various forums, including this one and I also spent hours with HP Support staff, both on the phone than in the instant discussion, and nobody has a solution for this.   No one except Cylclops, Member of the forum has no link with HP here and if you read the forum rules, it is simply a forum 'support user' and there is no official support provided here by HP.  Cyclops said in another thread that this problem will be solved "soon" and that a new update of the BIOS will be posted 'soon '.   I'm not sure about this.  I hope that one is displayed soon, but it's at least since August 2010 when the BIOS for the 210-2072 CL was first published, and certainly, you would have thought that someone in engineering or the HP quality assurance Department would have tested this combination of keys during the last three months.   One thing is certain, that no one at HP has ensured this known defect yet as much as we, the consumer can check.  I'm sure that one of the mods here will consider this a "mug shot", but honestly, it's not, it's just a statement of fact everything you should expect from writing on these forums: we're just talking to another and if HP is really listening suggests, and it is best to assume that society is not at least according to the "rules for Participation" posted here on the forums.

  You have to give the "shift + space' and 'Fn + space' keys to try however.   They do not seem to work for 'Page Up' and 'Page Down'.

  Hey, it's better than nothing;  not quite 'home' and 'End', but it you'll get there faster than just using the arrow keys, and it's at least something to use up to what HP messages a BIOS fix.

• How can I disable him flipping back between the pages with PgUp and PgDn? Please tell me that I can!

  From Firefox 4, it seems to have been decided that PgUp and PgDn are now buttons with which you return back between the pages. For me, this means essentially almost lose valuable information, because I actually use up and down pages, so I wonder. How can I disable this new and quite bothersome?

  Please tell me that I can!

  In the details of your system, I see this card installed: Macromedia Shockwave for Director Netscape plug-in, version 8.0

  You also seem to have the last, although always obsolete installed namely Adobe Shockwave for Director Netscape plug-in, version 11.5

  First, click on the orange button Firefox, go to add-ons and Plugins and disable the version of Macromedia.

  Then go to http://get.adobe.com/shockwave/ and update it.

  If the problem persists then, try running Firefox in Firefox to solve the issues in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• Since the update to firefox 10.0 (and then 10.0.1), the bottom of the Page, the Page Up keys, start and end work correctly. Is that what someone else has this problem, and are there any suggestions for a fix?

  for example, I read a Web page, when I push the bottom of the keyboard Page, sometimes nothing happens. Sometimes the page scroll a few lines but then does not continue to scroll down when I push the key several times. Sometimes the page immediately jumps to the bottom of the page; etc. Similar issues occur, in the direction towards the top, when I press the Page up key. The keys start and end are completely "dead", because the page does not move when I press them.
  It is important to note that all these keys work as usual when I open the browser Chrome or Internet Explorer, and other applications in which keys should be functional, so this problem is specific to Firefox.

  Hello

  Please check if still use the keys cursor to navigate through the pages is selected in Tools (Alt + T) > Options > Advanced > general and uncheck. This setting can also be turned on/off by pressing F7.

• Windows Vista wants to buy a key to keeping windows working properly.

  Original title: I use to have windows xp home edition, but I'm updating the system to windows vista.

  windows Vista now wants to buy me a key for me to keep the windows work properly. I hate this. I want to just go back to windows xp. I received my original came with my computer key. can u please help me to reinstall windows xp?

  Hi alexiayala,

  1. What is the exact error message that you receive on your computer?

  2. you have the Windows Vista installation disc?

  3. you have the product key for Windows Vista?

  If you have the product key of Windows Vista, you can try to enable it.

  For more information, refer to this link: How to activate Windows Vista?

  If you want to install Windows XP, you can perform an installation of Windows XP format.

  Note: If you have important data on your computer, you can take a backup of the data in any external device.

  Reference: Install Windows XP

  How to install or upgrade to Windows XP

  Hope the helps of information.
  Please post back and we do know.

• MacBook Pro keys stop and start working sudenly

  I have the Macbook Pro 13 "end 2011 with Osx El Capitan every time I turn on my mac, certain keys do not work as (A, F1, Backspace) I connect an external keyboard to type my password to the user, use like 3 minutes with external keyboard and laptop keys suddenly start working again, what is it possible already tried Reset the SMC and Landau."

  I also noticed that this happens whenever I have close the session of the user or shutdown my mac

• Why is my desk top empty and nothing works for pictures of office except those provided with plan computer?

  Desktop is empty I ran Mcafee security scan it quarentined, and fixed a problem of what was stated, but all the info has been removed from the desktop, pictures, movies, videos and music by virus. Now, I want to have a new image of the desktop, but nothing works... On the other hand, internet works just as it should to exployer

  Hi, Carlos.

  Restart the system and at the sign of the logo of the manufacturer to start typing F8

  Select Mode safe mode with networking

  Download the following tool, then select Full Scan to eliminate malware.  If your system has been infected, antivirus software has been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  I suggest to turn off System Restore before proceeding with the analysis.

  Turn off System Restore in Windows 7 and Windows Vista

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-System-Restore-in-Windows-Vista/

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  When the analysis is complete, restart and open a command prompt window.  Type the following command:

  Chkdsk /r

  Press enter

  You will receive a message about the volume of confinement.  Press y and press ENTER to scan on restart.  Restart your computer.  The analysis will take some time.  You will find the crawl log located in Event Viewer > Windows > application log.  Search for Winninet when the computer restarts.

• BACKSPACE key board is not working properly and only removes a letter at the time but you have to keep hitting on it and if the 2 letters are in a word it displays only a leter? __

  Return back does not work correctly, dates back only a space during the deletion of letters and if 2 letters are in a word it shows only one. Nancy Henry

  Try another keyboard.

  If a laptop computer, contact the manufacturer of your laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  AND/OR:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Why your program Illustrator there as MUCH of ERRORS during the mapping of art on a 3D object? HE ME DRIVEN CRAZY! IS IT SO DIFFICULT TO MAKE A PROPER SOFTWARE? WHY YOU INCLUDE A FUNCTION THAT IS NOT WORKING PROPERLY?

  Seriously now, why? Everything I try to map, it is loaded with errors! Tired of this!

  You see the little yellow triangle in your screenshot? There's something about the spot. For example, you might want to convert the complete works in full color and flatten transparency and try again.

  You can also dive a little further in the feature, and then you can see that what you asked is not possible to calculate. Your alternative would be to expand it in a decent light 3D software and all sorts of things: go ahead.

  The effect of 3D in Illustrator are no features 3D software.

• I can't view attachments in my Yahoo email account since I upgraded to Firefox 8. The only option is to download all attachments. There used miniatures at the end of the email to view them. I checked with Internet Explorer and it works properly.

  I can no longer view attachments in my Yahoo email account, since I upgraded to Firefox 8. The only option is to download all attachments. There used miniatures at the end of the email to view them without having to download. I checked my email in Internet Explorer and it's the proper functioning and the thumbnail display. What can I do to solve this problem in Firefox?

  OK, now, they show. I restarted my computer again and they are showing now.

• Please allow me to disable my PgUp and PgDown

  
  

  If anyone was wondering, I used the AutoHoyKey-script to disable the key PgUp and PgDown.

  Now I have to press the Ctrl + PG. Prev or Ctrl + PgDn to scroll

  Cheers, Thomas

  #NoTrayIcon; hides the status bar icon
  #UseHook; starts the process of crocheting

  ↑ PgUp:; Save Ctrl + PG. Prev
  Send {PgUp}; sends the PgUp"
  return

  ↑ Page down.:; Save Ctrl + PG. next
  Send {PgDn}; send the key PgDdown
  return

  PgUp:; disables the page DOWN key. Prev
  return

  PgDn:; disables the page DOWN key. next
  return

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• Why aren't windows to let me use my Windows 7 product key?

  First of all, I got my download of Windows 7 Professional of Dreamspark since I am in college for IT and burned it to a disc. I got it used it once on my old computer to reformat and it worked fine. However, I just built a new PC and use a new hard drive instead of put in my old and now it tells me it cannot authenticate the product key. I really can't afford to buy a different product key at the moment, I want to pay for another but if I'm only using this CD for the 2nd time on my PC why I'm having this problem?

  Skip entering your product key Windows 7 and complete the installation.

  The attempt to revive by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Download updates of Firefox. I have to go to IE and download it from there. Why aren't the automatic downloads happening on my computer?

  When an update is automatically available, I only know because Norton gives me a message that update.exe is safe. By clicking on the shortcut will not open Mozilla more so the update downloads. I have to go to IE and download, save and run it from there.

  I did the clean install. I guess now I have to wait for an upgrade to be sure, it worked properly. I'll keep your directions in case I need it. So far, everything seems to work very well. Thank you.