Why asm instead of ocfs

Similar Questions

• Why ASM isn't down a disk (LUN) after that it disconnects during a period?

  Version grid: 11.2
  
  By default, ASM descends a hours MON 3.6 after it goes / taken offline. This can be delayed by using DISK_REPAIR_TIME. But, why oracle is no in the first place? Can not wait until the storage team solves the problem?

  Hi GarryB,

  While a disc is set to offline, you have not fully mirrored. (Given that the blocks on the disk are not remirrored while disk is offline).
  Now leave a disc in another FG fail too... You may lose data.

  So choose the repair disk timer correctly is not as simple as that. The exadata, the time is extended to 48 hours.

  And 3.6 only being the default (parameter diskgroup) you can always change it yourself (given the precautions above).

  Concerning
  Sebastian

• Why 'TRY' instead of 'Install' on my CC

  I bought the full CC

  Hi jcox6969,

  Please, go to preferences and check if the installation language is selected in English: http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html . If the language seems to be OK, and then disconnect and reconnect to the rear on the CC Office.

  Kind regards

  Romit Sinha

• Flash builder why? instead of flash professional IDE

  Sorry if I seem ignorant but most developers and businesses said it is absurd to use professional flash instewad flash builder IDE.

  I am totally ignorant and thought that flash builder was FLEX - that is to say: I have no idea how to program in flex - I can only code in AS3. I'm off track here. What is the advantage of flash builder? ALL the tutorials I've read are on flash and almost never on flash builder - am I getting confused? Generator flash everything easier ID like an environment of coding in AS3 but adding many features to mnake - IE: no difference in coding or the swf produced etc...

  In addition to what the other guys said, Flex Builder (now it is called Flash Builder), Flash IDE, FlashDevelop, FDT and other programs are just development environments that come with some additional benefits. The result is the same - swf that is no different in the heart no matter what environment you are using.

  Conceptually, you can write code in a Notepad, compiler point swf and you will get swf.

  Although the Flash IDE has improved over time as a development tool - it is not a match for environments more sophisticated such as Flash Builder or FDT and FlashDevelop. Note that other than the IDE Flash environments are based on programs that are used by the developers in other languages like Java. For example, Flash Builder is based on Eclipse. This is significant because for many reasons that Flash IDE can not live up to what more robust platforms has evolved into. Unlike the other tools and frameworks, it is very difficult (sometimes impossible) to accommodate the Flash IDE for the development of industrial power. Deployment and version control are the major headaches in the Flash IDE.

  Flex is just a library that is developed on top of AS3 the same as you build your own classes (this is statement is true 95%). Of course, as mentioned, there is an additional way based on xml to develop Flex applications, but in the end, everything is translated into AS3 and compiled. Therefore, Flex application is essentially just a Flash application (and here the word Flash is used as a name of the technology as a whole).

  If you are unsure on what to accept as main tool, remember that the Flash IDE is a tool inherited which Adobe inherited from Macromedia. With the introduction of Flex/Flash Builder Adobe clearly demonstrated a commitment to a business oriented plus technology. Latest version of Flash Builder comes with an attempt to integrate Flash IDE workflow. Basically, the only step left is some kind drag timeline environment in Flash Builder and Flash IDE did die. It is my personal opinion.

  In addition, Adobe is trying hard to integrate their products into a framework/suite so that charts are developed where more natively (Illustrator, PhotoShop, etc.) and export them to the Flash format and programming tasks are accomplished in Flash Builder. It's called Adobe Catalyst.

  I have an idea that Adobe is usually very eager to kill the Flash IDE. The only thing stopping them is, perhaps, they do not want to piss off an already agitated crowd of designers who are reluctant to adopt OOP.

  The fact is that, together with the fact that the IDE Flash is natively a very awkward tool to use for true OOP development, I would recommend to anyone to move away from Flash IDE towards something more sophisticated.

  Of course, it is sometimes necessary to use the timeline to create graphics, but with the advent of physics and 3D libraries - chronology begins to look more in more lame, even for the animations.

  In my opinion there is virtually none of the qualities of redemption in Flash IDE at this stage.

• Generate two Archives instead of a newspaper

  Hello guys,.

  I want to know why when I run this script:

  export ORACLE_SID = BD

  RMAN target / < < EOF

  Run {}

  allocate channel t1 type disk;

  ARCHIVELOG backup all the format ' / disk1/arc_%d_%Y%M%D_%s_%p.arc';

  delete noprompt archivelog all backed up 1 times on peripheral drive completed before ' sysdate - 1';

  }

  output

  EXPRESSIONS OF FOLKLORE

  I have two bow when I ran this command:

  -rw - r - 1 oracle oinstall 6, 6M 9 Nov 07:45 arc_1_3049_827053996.arc

  -rw - r - 1 oracle oinstall M 98, 9 Nov 07:45 arc_BD_20151109_123_1.arc

  Why two Instead of One?

  Destination dest and archivelog backup is pointing to the same location

• avoiding the fsck confectioners

  our version of DB: 11.2
  our operating system: SLES11
  our fs: ext3
  
  My question: with the FRA residing on ext3, how can I avoid long fsck runs on the server restarts: even with the own stops, Linux will eventually trigger forced fsck runs after a period of time (see also [why the ext3 fsck after X days or Y Monte? | http://prefetch.net/blog/index.php/2010/04/18/why-the-ext3-fscks-after-x-days-or-y-mounts]).
  
  It is not recommended to disable this mechanism with tune2fs.
  
  Novell recommends using xfs instead of ext3. But who would really help (and xfs, although supported by Oracle is not tested according to MOS)?
  
  With the partition of the FRA with a size of 2.1 to fsck can take up to 30 minutes or more, and it is a long time for the db server to return to the operation.
  
  Of course, the ASM comes to mind, but it would be just an another slab of complexity in a simple setup otherwise.
  
  Thanks for your review or share your experience XFS.
  
  Thomas

  Mihael wrote:
  You can try ocfs2, even for the database not RAC, it is faster than ext3

  OCFS2 is NOT an option recommended Oracle as a database file system.

  In fact, the ASM (since 11g) has its own (cooked) files in cluster systems called acfs. ASM is the recommendation of Oracle.

  We use the two (ocfs and ASM) and since 2005 with 10gr 1. Experience say they use ASM and not ocfs/etc for the database. Some main problems of main storage and the problems over the years were non-issues because of the DSO.

• How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

  I have some questions on how Oracle, Oracle RAC and 3^rd party clustering CLusterware fit between them.

  Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

  Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

  Q3. Is it is possible to combine an Oracle database using 3^rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

  Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

  Q5. I also read that RAC can use 3^rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

  Is this the case?  If yes why never bore you with 3^rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3^rd party in place and you decide that you need to use the same material for a database cluster)?

  All wisdom greatly appreciated,

  Jim

  Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

  11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

  The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

  See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

  It is perhaps easier to explain if you can explain what problem you are trying to solve?

• Help: ora-15038 when run root.sh

  OS: Enterprise Linux oracle 6.4

  DB: database oracle 11.2.0.1

  After the grid install oracle rac, run /u01/app/grid/root.sh

  Description

  Ask Questions, get help and share your experiences with this Article

  Occurrence

  Symptoms

  Workaround

  Patches

  History

  References

  --------------------------------------------------------------------------------

  Applies to:

  OS Linux

  Oracle Database - Enterprise Edition - Version 10.2.0.1 to 11.2.0.4 [version 10.2 to 11.2]

  Linux x 86-64

  Haansoft Linux x 86

  Description

  After leveling SAN 'IBM NSeries N7950T - Data ONTAP 8.0.2P3' firmware 'BM NSeries N7950T - Data ONTAP 8.1.1' firmware, ASM starts cannot be mounted because of errors the next:

  SYS@+ASM2 > alter diskgroup DATA11G mount.

  change the mount diskgroup DATA11G

  *

  ERROR on line 1:

  ORA-15032: not all changes made

  ORA-15017: diskgroup "DATA11G" can not be mounted.

  ORA-15063: ASM discovered an insufficient number of drives for diskgroup

  'DATA11G '.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  --------------------------------------------------------------------------------

  Ask Questions, get help and share your experiences with this Article

  You want to explore this matter further with other customers of Oracle, Oracle employees and Industry Experts?

  Click here to join the chat where you can ask questions, help others and share your experiences with this particular article.

  Check out the discussions on other articles and useful topics by clicking here to access the Homepage My Oracle Support community for installation/update of database.

  Occurrence

  (A) origin configuration:

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.0.2P3 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  (B) the problem started on the new configuration 'IBM NSeries N7950T - Data ONTAP 8.1.1':

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.1.1 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  Note 1: The problem can occur on any version of ASM (10.2.0.1X to 11.2.0.X).

  Note 2: The problem can occur on any release ASMLIB.

  Note 3: This problem can occur with any other provider of storage, if the firmware update changes / changes physical_block_size = 4 096 bytes (4 KB).

  (C) this is a problem with "logical_block_size" are present now drives = 512 bytes and "physical_block_size" = 4 096 bytes (4 KB) because of follows her SAN firmware upgrade:

  Before the updated firmware to the storage device:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  512

  After the update of the storage device firmware:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  4096

  This problem occurred because of storage the device firmware has been updated. The old firmware reported size of logical block of 512 bytes / 512 bytes physical block size, after the upgrade, the new firmware reported, 4096 bytes physical block size / size of 512 byte logical block. Therefore, a diskgroup created with 512 bytes blocks now suddenly work on a device to report areas of 4 096 bytes. Why ASM will refuse to import/up the diskgroup (s).

  In other words, the logical sector size is presented = 512 bytes and the physical size of area presented = 4 096 bytes (4 KB), it is not supported by ASMLIB API at this time.

  (E) despite the ASM starts were created on 512-byte sector size disks, ASM detects disks ASMLIB with a = 4096 bytes (4 KB) sector size instead of a size of sector = 512 bytes, this inconsistency is causing the issue (ORA-15085: ASM disk "" is the size of sector incompatible.):

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ------------------------------ -----------

  ...

  0 75 ORCL:TMSTS01_LUN010 4096

  (E) but if the ASMLIB is disabled/bypassed (ASM_DISKSTRING = "/ oracleasm/dev/discs / *'"), then the disks are presented/detected with a sector size = 512 bytes:

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ---------------------------------------- -----------

  ...

  / dev/oracleasm/disks/TMSTS01_LUN010 0 75 512

  (D) this problem is due to update the Firware SAN and the next bug ASMLIB (ASMLIB enhancement):

  ? Bug: 13999609 - REPORTED PHYSICAL BLOCK SIZE CAN CAUSE PROBLEMS WITH DATA 10 G databases

  ? oracleasm pilot (ASMLIB) from today works in the expectation that the logical block size and the physical block size are 512/512 bytes. This particular/firmware storage seems to be, then the configuration will not work with the oracleasm driver.

  ? We understand that size of 4K sector disks must be supported, so we are working on a solution of development of ASMLIB.

  ? Therefore, currently, this update of the firmware of the SAN is not certified and is not supported with ASMLIB.

  Symptoms

  Error description:

  15085, 00000, "ASM disk \"%s\"has inconsistent sector size. »

  * Cause: An attempt to mount a diskgroup failed because a drive reported

  value of incompatible sector size.

  * Action: Use disks with sector size compatible with the Diskgroup sector size,

  or ensure that the operating system can properly report the disk

  sector size.

  //

• How Mail copy computer 2008 to 2012?

  On the computer (newer) 2012, they want only to be under the account of the ISP (which I didn't ask for) and therefore may be either in the Inbox or sent.

  A computer is set up the way I want it (2008), but I can't get the new-to-me computer (2012) putting him in the same way.

  Also, either by the way, for what it's worth, the background of the sidebar on the old computer is a very light beige color, while on the newer computer, it is a light blue color and I find that a bit odd.

  I'm copying Mail information from 2008 2012 desktop computer without having to migrate everything on. Why copy instead of move? I don't want to do a wholesale migration because I don't want to not all the rubbish that has accumulated over the years to come through.

  Note: The Finder file structure * in the home user * is slightly different between the two machines:

  2008: Desktop, Documents, downloads, library, movies, music, photos and Public

  2012: Desktop, Documents, downloads, movies, music, photos and Public

  Note that there is no 'library' in the computer of 2012; However, there is a library in "Macintosh HD" but since it's in a different path, I want to copy the mail folder ' 08 in there. Or can I?

  Edit: Clarification regarding the first sentence, the 'they' I'm talking about are the different email addresses. For example, [email protected], [email protected], [email protected], etc. There are not very many, ~ 5 or more.

• Firefox 11.0/12.0 does not start and gives no error message, how do I fix? Windows 7/8

  Running Windows 7 on one partition and Windows 8 Preview of consumption on the other, Firefox does not open for either.
  Firefox crashes when opening without error message. I reinstalled and deleted manually the profile information. If I create a new profile, it works up until I got close and try to restart I have to make a new profile.
  I tried removing/reinstalling java as well (in case), which I had been to some of the java edition of my Windows 7 partition installation.

  As I run Firefox, if I look at the Task Manager, Firefox.exe appears for a moment, but disappears almost immediately.
  No files appear in the directory "C:\Users\[Username]\AppData\Roaming\Mozilla\Firefox\Crash reports" with the exception of the file "InstallTime."

  • The information posted in the "Troubleshooting information" section below comes from the partition of Windows 8 Preview of consumer. There are errors with my display not updated correctly, driver - Firefox was working on Windows 8 Preview of consumption until recently, so I guess that it is not part of the question.

  Why not instead to downgrade a Firefox exist for earlier versions, consider trying several installs.

  Portable Firefox is designed as an easy to install using Firefox as a browser extra process.

  • He's probably still available in versions http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released

  Familiar with your facility manually several versions of Firefox will be easier, simply use separate unique profiles for each version. Use the built in the Profile Manager or the standalone version to help you. These tests do not require all other partitions and must do not include changes to the firefox installs and existing profiles.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox#Using_new_profiles_in_secondary_Firefox_installations
  • http://KB.mozillazine.org/Profile_Manager
  • https://developer.Mozilla.org/en/Profile_Manager (standalone app)

• Failed to add the network printer

  Hello
  
  We have a client that connects to our ERP system to print orders.  They connect through a VPN site-to-site and then access our system through an RDP connection to a server 2008R2 instance.  The printer is a HP LaserJet 4100tn
  
  When I first set up in the spring I was intending to use the easy print with the redirect to printer driver to print orders.  However exceptionally slowly printed orders and I was not able to determine why.  Instead I've implemented their LaserJet as a local printer on our desktop server remotely using a HP LaserJet 4100 Series PCL6 driver.  It worked perfectly, and they have been printing without problem until yesterday.
  
  Yesterday for some reason any printer stopped working.  On our Remote Desktop server, it appeared as grayed out with an exclamation mark above.  I did the following diagnosis:
  
  > They can print from their own local office it
  > They changed and turn it on again
  > I can ping the printer from our server OK
  > I can get on the web interface of the printer OK from our server
  > Restart our server remote desktop
  > Turn off the Windows Firewall on the Remote Desktop server
  
  I therefore decided to remove the printer and add it again.  I go through the configuration wizard Windows printer usual choosing to do a new TCP/IP port, but when I put the IP address of the printer in Windows says that it is not the printer on the network (photo attached).
  
  I tried to delete the printer port which has been associated with this printer and remove the driver but Windows still won't "see" the printer.
  
  I am able to configure this printer on other servers from RD (2003 and 2008) and I also tried setting up on an old XP box, I had to hang out without problem.  Curiously, it seems only that this server is the only one that I can not set up the new even if it can ping the printer OK.
  
  I found a troubleshooting printer HP hereWeb page but who was no help, and the software does not work on Windows Server versions.
  
  Don't know what to do next!

  This was solved by changing the IP address of the printer

  After changing the IP address, I was able to add the printer to the server OK.

  I wasn't able to find out why this is the case, but guess it is some incorrect IP or the information stored in the registry.

• Is it possible to stop windows defender updates?

  I don't want to use windows defender, because it does not update itself automatically so have found a better solution, called "peerblocker.

  Now turn off the annoying definition updates?

  Nobody asked someone to understand anything. I was simply stating something along the way.

  Already, I had to do a second post asking the same question, but it seems that MVP for all their skills and their realization can not even make a determination of an original question.

  I think that if I was in this thread and I had all the qualities at all that I would be asking myself what is point still give it my time, because obviously all MVP who is posting in this thread has no idea and rather than trying to understand anything of a technical nature, that is to say why, has instead allowed themselves seem incompetent.

  http://social.answers.Microsoft.com/forums/en-us/XPsecurity/thread/6cc7bbfd-3006-4ef7-BE4E-4b288b2b3885

  I replied to you, could you check?

• Stylus active Version A02 a winner

  Received today my stylus version A02. I think the 3rd times the charm and we finally have a winner. No clicks hovering and without waiting forever for the table to recognize the stylus. No disconnects for long periods of time no more. Time will tell...

  Unfortunately, despite repeated requests, Dell still stubbornly has not issued a manual and Tech specs on the stylus.  God knows why.  Instead, know the stylus to read the messages in the forums and to use and experiment with.  (There are a few pages on the stylus in the manual of DV11P, if I remember correctly, but there is little information).

  As for turning off the pen: my understanding (based on experimentation) and that of others, is that the stylus auto-offs after about 30-60 seconds, when the tip of the stylus is not in about 1/2 to 1 inch from the face of the tablet.  You can experiment to test this, as I did - see if the appearance of the hover.  And so, no need to remove the battery.  To reactivate the stylus, press the tip on the tablet surface (or, optionally, you can also just press the stylus buttons - I don't remember if that will do).

  Personally, I prefer a real switch / stop - why not have one on top of the tip, just like a pen, or integrate it into the buttons at the end of the stylus, when a button is pressed and held?  Should be pretty easy to do, it seems to me.  But, in the meantime, it is what it is.

• Strange behavior of NAT ASA 5505

  Hello

  We have an ASA 5505 version 9.1 (5) and we need to open port TCP 55055 firewall that redirect to TCP port 80 on ip QNAP Viostor 192.168.11.254

  I added a network object in this way:

  The Viostor object network

  Home 192.168.11.54

  Description QNAP_Viostor

  NAT rule:

  NAT (inside, outside) interface static service tcp 80 55055

  Firewall rule:

  access-list outside_access_in line 8 Note Viostor

  allowed to Access-list outside_access_in line 9 extended tcp any Viostor eq 55055 object

  When I try to connect with the application Android Vmobile I see that notify the journal of the ASA:

  Request TCP and eliminated from MY_EXTERNAL_IP to outside:X.Y:Z.W/55055

  The ASA has no server UDP which serves the UDP request

  I don't understand why UDP instead of TCP.

  Please help me!

  Thank you

  Ahmed, thanks for your replies... However're missing you something important (sw ASA version). Tracer package shows THAT NAT is not affected; and on this sw version ACL does not use external_IP or mapped IP, but the real_IP instead.

  s.be00001, follow these steps:

  object service 55055 service tcp source eq 55055object service www service tcp source www!nat (inside,outside) 1 source static Viostor interface service www 55055!access-list outside_access_in line 9 extended permit tcp any object Viostor eq www

  Run the packet - trace and send us the results:

  packet-tracer input outside tcp 8.8.8.8 1025 [outside interface IP] 55055 detailed

• Password ASMSNMP accepting not DBCA.

  Hello

  I was trying to install the database using dbca. While the installation of dbca under IDENTIFICATION of ASM information it ask the password for ASMSNMP but my problem is when I type the password, it does not accept. I gave the password as asmtest. Here is how I changed the password and tried to give the password: -.

  SQL > alter user asmsnmp identified by asmtest;

  User changed

  

  BUT WHEN I GAVE THE PASSWORD that is asmtest what (below a) it shows: -.

  

  In addition, here is the output of the listener. I use the GRID infrastructure: -.

  ========================================================================================================

  [grid@storage admin] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on July 14, 2015 12:20:31

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=storage.castrading.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

  Start date July 14, 2015 08:48:06

  Uptime 0 days 3 h 32 min 25 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/grid/diag/tnslsnr/storage/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=storage.castrading.com) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM' READY State, has 1 operation for this service...

  Service "orcl" has 1 instance (s).

  Instance "orcl", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  [grid@storage admin] $

  ===================================================================================================

  [grid@storage admin] $ vi listener.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = orcl)

  (ORACLE_HOME = u01/app/11.2.0/grid)

  (SID_NAME = orcl)

  )

  )

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = storage.castrading.com) (PORT = 1521))

  )

  ====================================================================================

  [grid@storage admin] $ vi tnsnames.ora

  NETSERV =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = storage.castrading.com) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  ====================================================================================

  sqlnet.ora # Network Configuration file: /u01/app/11.2.0/grid/network/admin/sqlnet.ora

  # Generated by Oracle configuration tools.

  #NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  SQLNET. AUTHENTICATION_SERVICES = (ALL)

  NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  ADR_BASE = / u01/app/grid

  ========================================================================================

  Please suggest why ASM password does not work. I have even followed the solution for ORA-12641, but to make the R & D through online. I still couldn't solve it. Help, please?

  Hi Tania,.

  Thanks for the support. You named and I did. It worked. Thank you so much life. Pending approval of the friendship.

  HERE'S WHAT I DID TO THE INSIDE OF THE GRID:

  CD $ORACLE_HOME/network/admin

  sqlnet.ora VI

  [grid@storage admin] $ more sqlnet.ora

  sqlnet.ora # Network Configuration file: /u01/app/11.2.0/grid/network/adm

  in / SQLNET.ora

  # Generated by Oracle configuration tools.

  #NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  SQLNET. AUTHENTICATION_SERVICES = (NONE)

  NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  ADR_BASE = / u01/app/grid

  [grid@storage admin] $

  Thank you very much

  Christophe