Why AVG Antivirus program blocking the restoration of the system work?

Similar Questions

• The free AVG antivirus program disables the Windows Firewall? Is it safe?

  I have Windows 7.  After you download the program AVG free anti-virus, the Action Center tray icon will display a warning indicating that the Windows Firewall is not enabled. After checking the Windows Firewall settings in the Control Panel, this message appears: "Windows Firewall is disabled or badly adjusted upward.  If I click to re - turn on the Windows Firewall, the center of the Action WARNING disappears.  I don't think that there is a firewall that is included in the free version of AVG.  Is it safe to leave the Windows firewall stops?

  No, it is not without danger. You should have a firewall running. A firewall running on the PC, such as WIndows firewall or a firewall on your router, or preferably both.

  I don't use AVG can not tell for sure re its features recent firewall, but at the time where I use it on an old PC it doesn't have a firewall in the free version.

  Which AVG have you loaded, AVG9, 2011, 2012? and where did you?

  You can test your firewall here (or similar sites) click https://www.grc.com/x/ne.dll?bh0bkyd2 go ahead and run the common ports to test (at least). If the firewall is running ports report . If they bring or then it is not running.

• I am trying to install an antivirus program. The program will not install because it establishes that there is another present anitvirus program. Why the new software does think that the other program is still there?

  The antivirus program that program anitvirus I try to install claims is still on my computer came with the computer when it was bought a little more than a year before.  This antivirus program was followed by another antivirus program.  The antivirus program on the computer at the time wherever he bought has been removed until the following antivirus program has been added.  The second antivirus on the computer program has been removed before my attempt to install the third-party antivirus program which States that the original anti-virus software came with the computer is always on it.  The antivirus program that is allegedly still on the computer is not on the list of installed program computer.  None of the two antivirus programs that were on the computer is on the list of installed programs computer.  How can I remove a program that is no longer on the computer?  Why the antivirus program that I try to install again could think that a program is still present on the computer where this program has been deleted if long ago?

  Give this program a go. It is effective to clean up the damage.

  http://www.revouninstaller.com/

  I hope this helps.

• Impossible to uninstall AVG antivirus program

  This is the error message that appears when I try to uninstall AVG Antivirus: installation of the local machine Installation failure: error: Action for key registry HKLM\SOFTWARE\MICROSOFT\Windows NT\Current Version\Windows: creation of the registry key... Error 0 x 80070005 Please Help!

  Hello NancySylvester,

  Most antivirus products have a software removal tool that should be used instead of remove in Add/Remove programs.

  Click on the link below to select the right version of AVG that needs to be removed.
  http://www.Avg.com/us-en/download-tools

  Sincerely,

  Marilyn

• product information programmed into the system board are invalid or missing

  the following product information programmed on the system card is missing or invalid

  WHAT information?

  Without providing us with all the details, we can not help you...

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• I tried to delete some unused programs of my had drive and the PC deleted wlidcl.dll. How can I get this program for the PC works as before?

  I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs.  What do you suggest me? Thank you

  Norman.--

  E-mail address is removed from the privacy *.

  original title: wlidcl.dll

  Hello

  I suggest to follow the steps below and check if the problem persists:

  Not one:

  Uninstall Windows Live essentials followed the procedure described in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step b:

  Download and install Windows Live essential from the link:

  http://explore.live.com/Windows-Live-Essentials?OS=other

• My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  You must connect prove you are currently subscribed.

• AVG Antivirus is blocking all my apps CC

  The members of the CC, Hello

  This mainly reported to a suitable common problems, but if you have any suggestions, my questions are at the end. thank you.

  I have a new PC, Windows 10 / 64-bit installed. I installed all my applications required CC (Pr, Lr, Ps, Ae) and used very well on my fast machine (sorry, it's just a good feeling).

  Later, I decided to install AVG Antivirus FREE.

  After that, none of the creative Cloud applications where it is able to open.

  • Opening Premiere Pro, I get following message: "Premiere Pro could not find capable video modules. Please update your video display drivers and start over.
    The starting image frozen loading ExporterQuicktimehost.prm
  • After effects was crashing just after opening
  • Lightroom and Photoshop could not open at all

  There are a lot of topics about this problem on the forum. All related to the graphics card, BIOS questions... I tried the solution proposed, but no change in my problem.

  After long reflection and tests autour, I uninstalled AVG and now I can work again! Problems have disappeared.

  Someone at - it the same problem with AVG?

  Which free antivirus would you recommend?

  I did something wrong in the settings?

  Thanks in advance for any help/info on your side.

  Hello

  Here is a KB doc, I just write: errors causing software AVG

  For the moment, we are recommended disabling or uninstalling the software.

  Thank you
  Kevin

• Why DurationElement is not blocking the characters not substituted?

  In OSMF 0.95, I used successfully a DurationElement to implement a framework simple poster, using a composition of series built as follows:

  var posterImageEl: MediaElement =

  mediaFactory.createMediaElement (new URLResource (...));

  durationEl var: MediaElement =

  new DurationElement (0.0001, posterImageEl);

  var videoEl: VideoElement =

  VideoElement (mediaFactory.createMediaElement (new URLResource (...)));

  videoEl.defaultDuration = 31.67;

  var el: SerialElement = new SerialElement();

  (durationEl) el.addChild;

  el.addChild (videoEl);

  With the media player AutoPlay property set to false, after loading, the image of the poster was posted. When the player started playing, the image of the poster disappeared and read video. This is the desired behavior.
  This code has stopped working in OSMF 1.0. After loading, nothing is displayed. The image of the poster is not displayed until the player starts to play.
  I found the cause of the problem. In OSMF 1.0, the class of DurationElement block exposure of all traits not substituted when the element is neither play nor suspended. In particular, it blocks the exhibition of the characteristic of the display object until the item is played. If my image of the poster does not appear until the player starts to play.
  I was able to work around the problem by commenting the line of code in DurationElement which blocks the line of display object. I replaced lines 250 to 259:

  private public static const ALL_OTHER_TRAITS:Vector. < String > = new Vector. < String > ();

  {

  / / Everything but LOAD, SEARCH, PLAY and TIME.

  ALL_OTHER_TRAITS.push (MediaTraitType.AUDIO);

  ALL_OTHER_TRAITS.push (MediaTraitType.BUFFER);

  ALL_OTHER_TRAITS.push (MediaTraitType.DISPLAY_OBJECT);

  ALL_OTHER_TRAITS.push (MediaTraitType.DRM);

  ALL_OTHER_TRAITS.push (MediaTraitType.DVR);

  ALL_OTHER_TRAITS.push (MediaTraitType.DYNAMIC_STREAM);

  }

  with:

  private static const ALL_OTHER_TRAITS:Vector. < String > = new Vector. < String > ();

  {

  Everything except LOAD, SEARCH, PLAY and TIME.

  ALL_OTHER_TRAITS.push (MediaTraitType.audio);

  ALL_OTHER_TRAITS.push (MediaTraitType.buffer);

  ALL_OTHER_TRAITS.push (MediaTraitType.DISPLAY_OBJECT);

  ALL_OTHER_TRAITS.push (MediaTraitType.DRM);

  ALL_OTHER_TRAITS.push (MediaTraitType.DVR);

  ALL_OTHER_TRAITS.push (MediaTraitType.DYNAMIC_STREAM);

  }

  With this change, my code once more to work correctly, and the image of the poster is displayed when loading.
  So my question is: in OSMF 1.0, why DurationElement blocking features not to be overridden when the element is neither game nor paused? My solution is likely to lead to some kind of problem, I'm not aware of that?
  A related question:
  In the ExamplePlayer example, there is a poster frame example that uses a class named PosterFrameElement that extends from ImageElement to add a dash of game, as well as a class named PosterFramePlayTrait that extends from PlayTrait to stop as soon as it is played. Is - that the best way to make posters simple frames? This approach seems to be too complicated compared to my attempt to (perhaps naïve?) simple to use a DurationElement.

  The change you are referring was in response to this bug:

  https://bugs.Adobe.com/jira/browse/FM-719

  Basically, before the fix for FM - 719, the proxiedElement of her DurationElement would expose his features even when the playback head was not the beach of the DurationElement.  This proves to be problematic if her DurationElement was placed in a SerialElement, in what traits would be exposed even when him DurationElement wasn't the current child.  Usually this isn't a problem, but if you have a SerialElement (with a DurationElement) which is in parallel with something longer, then her DurationElement will expose his features, even when its duration is reached, which is unlikely to be an expected result.  So, your solution would solve your problem, but this could introduce problems in the case where the DurationElement is used by other means (no-shows framework).

  The example of ExamplePlayer circumvents the whole issue of the times by mapping the poster in the "play" operation frame display  In general, it is a useful model to use to include pieces isolated from the logic that must be performed immediately (BeaconElement uses the same schema).  I agree that it is more complicated than the direct use of a DurationElement, but it is much less fragile because it does not depend on the calendar somehow.

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• Windows Update blocks the system off, it

  I shut down the system, while it has been updated of the system (Microsoft Update). Now it crashes, saying that this update no. 11 of 13 is busy

  What should I do?

  The operating system is windows 8.1

  The system should be able to launch an auto repair.

  First you must do a full stop down to Win 8.1 as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  After that, you must restart the laptop... Usually the system would start an auto repair procedure that should solve the problem of update.

• from vista, I get a black screen, the system works I just can not see

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Games crash on XP, worse, the system worked

  I have problems with games crashing on my windows XP system (other programs seem ok).  This is particularly evident with Company of Heroes, but occurs with other games as well (for example Dragon Age).  Sometimes, the program quits just (with error); more often, I get the BSOD, or another complete system crashes.  It didn't happen when the system is new (it might be 2 years old now), but it's happened for the last year or two.

  Interestingly, if I do a reboot of my system just before play and then do not run other programs before you start the game, so I tend not not to have problems for the entire game session.  If the computer has been running for awhile before you start the game, then I can reliable wait an accident at some point in the first 30 minutes or so.  This suggests that the PSU or heat are not the problem here.

  I wonder if my sound card is the culprit - a version of the value of the sound blaster audigy 2 and while the drivers are current, creative labs has not issued a new driver for this card in a few years now.  Other drivers (video, bios, DX9, etc.) are completely up to date.  I use a processor intel E6850 dual core chip + NVIDIA 8800GTS 512, btw.

  Any idea would be appreciated.

  Thanks for the suggestions.  In the end, I realized that my BIOS has been on the side of old, so I've updated that and also updated the driver for the NVIDIA network, which was also old Bus Enumerator (I went through all the entries in looking for drivers device manager who had available updates when I used the update button the pilot).

  I have not had an accident since.