Why can't I accept a request for file sharing?

Similar Questions

• Why can I not download the drivers for my Kodak ESP 5 Aio on my Comp?

  Why can I not download the drivers for my Kodak ESP 5 Aio on my Comp?

  Hello

  I understand that you tried to download the drivers from the link above, but it failed.

  Please answer us with the following information.
  1. what happens when you download? You receive error messages?
  2. what browser do you use?
  3. from which site you download drivers?

• Why can't I download the update for windows 8

  Why can't I download the update for windows 8 as advertised on the site?

  Windows 8 will be available for download upgrade of existing PCs in more than 140 markets and 37 languages in earlyhttp://www.windows.com/buy at 12: 00, local time in branches worldwide.

  You can read the full announcement here

• I have already student/teacher creative cloud. Why can't just BUY Adobe Stock for $29.99 per month?

  I have already student/teacher creative cloud. Why can't just BUY Adobe Stock for $29.99 per month?

  Hello

  You can buy Adobe Stock for an additional $ 29.99 per month.  Please contact our sales team for assistance - 800-585-0774

  Thank you

  Bev

• Why can't I download hearing CS6 for Windows Vista? I did for my PC.

  Why can't I download hearing CS6 for Windows Vista? I did for my PC.

  Well:

  1. you can download.

  2. you should be able to install it using compatibility mode.

  If you have problems with 1. using adobe cc, you can download it here if you follow the 7 steps: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• Can't see another computer for file sharing

  Hello
  I have 2 computers in my house, a PC running Windows 7 Home Premium x 64 and the other a XP Home Edition SP3 race, both connected to the Internet through a router TL-MR3420 and the adapter TP-LINK TL-WN822N. I have enabled the sharing of files on both computers and have no problem to display all of the files shared between each computer, so far.
  Whenever I try to view another computer via "Network" or "homegroup" menu on 7 (or my network places on XP), I can't see my other computer which is supposed to be there. So far, I've tried a few attempts to analyze and resolve:
  1 ping each other by IP - success.
  2 ping each other by the name of the computer - has failed.
  3. try to access to "- and " run - failed with error 0 x 80070035 - path not found network. ".
  4 run diagnose step above on Windows 7, she returned with a result: "the device or resource (my static IP XP) is not configured to accept connections on port 'The file sharing and printers (SMB)'."
  5 turn off the firewall on the computers and router.
  6. ensure that necessary services for file sharing are active.
  7. the reactivation of the wireless connection on both computers.
  8 change the name of the Working Group on both computers.
  9. run ipconfig/all on both computers.
  10 install this fix on my XP.
  Ipconfig, it seems my two computers showing the active DHCP on 'no', so I changed my network settings to "obtain an IP automatically" she turns to the 'yes' later. And "NetBIOS over TCP/IP", showing the different statutes on 7 that it is activated on XP it is disabled, even though I put it activated via the WINS tab on the XP network settings. Still do not solve the problem.
  I don't know if it means something, but I share also some folders on my 7 to my Tablet ES File Explorer app, it works as it should (as long as I use static IP address), but if I try to connect my tablet to shared folders on XP, it always shows error message on either:
  WiFi is turned off (it is)
  SMB server is out of reach of the network
  The ip address is not valid
  Blocked by the firewall
  SMB service is disabled
  I guess that Wifi, IP and firewall are not the problem, and I don't know about SMB, it's stands for Samba / file Printer Sharing? He has already checked on computer network settings.
  Any help would be greatly appreciated. Thank you.

  I solved this.

  I opened my XP, run these commands via cmd:
  netsh int ip reset resetlog.txt

  netsh winsock reset
  Restart the computer and then change my connection of cable wireless lan then back to wireless again.

• Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Download file will not be

  Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Hello

  1. what operating system is installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. are you able to download the file using any other computer?

  5. do this happen all sites or with any specific Web site?

  6. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps below.

  Step 1:

  a. click the Start button.

  b. in the start search box, type %temp% , and then on enter.

  c. delete all files in the Temp folder.

  Step 2:

  a. press the Windows key + R

  b. in the run, prefetch, type dialog box press ENTER.

  c. remove all files

  Method 2:

  If you are using Internet Explorer, try in no add-on mode.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click on System Tools.

  e. click on Internet Explorer (No Add-ons).

  Method 3:

  Optimize Internet Explorer from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Why can't Lightroom 5 read these same files to my old 5 d? Any help or fix it please!

  Why can't Lightroom 5 read these same files to my old 5 d? Previous Lightroom could read all my files very well. They were not moved or renamed. "Lightroom has encountered a problem of reading of this photo (!). No idea why or fixed?

  It shows my 5 d MarkIII files perfectly. Still more old files 40 d and nikon. But almost all of my original 5 d files appear in white with the in the upper right corner.

  When I upgraded lightroom the transition of this catalogue and all the remains transferred very well. Just not the old files. I had hoped that an update would fix it but still no luck.

  Perhaps I should remove and reimport?

  Any help is very appreciated.

  One last thing.  If it's on a Mac and that you have recently updated to the 10.9.3, Mavericks then that makes the users folder hidden, so photos down there could be a problem.

• How to remotely wake up Vista for file sharing?

  I need help to wake up my Vista PC mode standby for file sharing application. The PC is connected to a router and I can wake him from sleep mode by pressing a key on the keyboard. In addition, I can wake up the PC for the Logitech Media Server application. I have the Logitech Media Server running on this computer. As soon as I turn on the player (carrier or SB3), the PC wakes up fashion 'sleep'. If the "sleep mode" works well for Logitech Media Server.

  Now, I want to make this PC a NAS. So I need to reactivate it for file sharing applications. I have laptop and a Media Player for a Western Digital that need to access the files on the Vista PC. Please advise on how I can wake the PC for this application.

  Thanks in advance.

  Hello

  I suggest you enable wake up LAN in the BIOS and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-wake-on-LAN-capabilities

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Why can not upload pictures to a photo album shared for me mac?

  I have created a shared album and invited the family members to it.  My cousin has added a few photos to him as well.

  I just went to record his photos on my iMac, but cannot me these menu options.

  I raised my support, but it has all the options except the new PHOTOS app for mac?  What can I do?

  Videos and pictures of the iCan be recorded or downloaded from a shared album?

  Yes. After photos are shared, anyone who can see the shared album can download and keep them permanently. Videos can be downloaded to a Mac or a PC. On a device iOS, videos sent from iCloud and cannot be downloaded.

  • On a compatible iOS device, you can save pictures in your film or Photos tab.
  • In iPhoto or Aperture for Mac, you can add or copy shared photos or videos in your library.
  • On a Windows PC, you can copy pictures and videos to an album shared to any folder.
  • On the web, you can upload photos and videos directly to your computer from the detail view of each photo or video.

  Do you see an option to import if you ctrl-click on a photo.

• Why can't find a telephone number for technical problems to microsoft

  Where can I find a phone number for support technique microsoft?

  Hello

  If your vista operating system is preinstalled by Dell, HP, microsoft etc offers no free support

  all support is the manufacturer of your computer

  or feel free to ask your questions in these forums

  Microsoft technical support

  http://support.Microsoft.com/contactus/?ws=support#TAB0

  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  Select a product for Assistance

  Select a product to see assisted support options are available for your product. This applies only to products purchased separately from your computer software.

  http://support.Microsoft.com/select/default.aspx?target=assistance

• Why can't my 6500 has more scan/file more than one page at a time?

  Why can't my 6500 has more scan several pages at a time?  I tried to scan a three page article.  Each page must be analysed individually and saved as an individual file.  Very frustrationg.  And, of course, there is no manual to follow or refer to.  Thanks to someone out there who might know the answer.  Happy days of the Turkey.

  Hello

  Please see the link below for how to scan multiple pages one.

  http://support.HP.com/us-en/document/c00018775

• Why can't I add keywords in properties file to jpg files?

  I am organizing and add further power when looking for pictures by adding keywords (tags).  I right click on the file then click on properties, and then click summary.  I fill out the empty fields and click apply then ok.  When I reopen it the properties of all of the fields are empty again.  It seems that I can add them to other types of file.  Why not jpg?

  Thank you

  Well, that's really strange.  Anyway, I don't really have the means to hang a flash directly from my camera, so I put the flash drive in my computer with the camera.  Move the photo into the flash drive and tried to give keywords while on the flash drive with no luck.  Move the picture on my hard drive, still no luck.

  And I'm not sure how but you has inspired me to think about something.  I had my jpg files associated with Corel PhotoPaint X 5 so when I opened them, they opened in Corel.  I changed the association to Windows fax and picture viewer and my problem is solved.  I can now add all the info I need.   Looks like I need to take this discussion to Corel :(

  I thank very you much for the time and effort you invested in my number!

  Mitch