Why can't I hide labview exe

Similar Questions

• Why can't code when deploying exe?

  Hello

  I wonder what is the reason for blocking user wfom coding when the program is compiled into the exe?

  Wouldn't be good to allow the work of the user while the process, sometimes it takes a long time at the end and look in the brogress bar...

  I don't know if there is a technical reason for this (although I guess that there is), but if you want OR change it at any time, you probably vote for this: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Allow-users-to-continue-working-when-a-build-is-in-pro...

  Also, if you read the comments here you can see options for what you can do today.

• Why can't I control my LabView signal generator?

  Why can't I control my LabView signal generator?

  I put in schema-block function RSSMIQ (a function of the driver for my generator). I click on the RACE of VI, but compare a (red dot) interruption between the VISA ABC and ABC VISA and VISA SESSION flash icon. Why?

  Automatically, it is open RSSMIQ DEFAULT INSTRUMENTS SETUP UTILITY and compare the figure downwards:

  

  Is that a mistake? What? Why? I have fought with my generator WITHOUT ERROR?

  Please see my response to your other post response No. 26 .

• How can I prevent the WKUfind.exe that appear on my screen why I start my pc

  How can I prevent the WKUfind.exe appearing on the screen when I miss my PC?

  Hello

  1. what version of Windows are you using?

  2 have had any changes made to your computer before this problem?

  Perform the following methods and check if it helps.

  Method 1:

  I recommend placing the computer in a clean boot and then check if the problem persists or not.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• LabVIEW:EXE generates the error 1003 calling plugin with the type definition

  Hi all

  I am running LV 2012 on a Win 7 machine. I had this same problem with LV 2011, so I'm sure that's not associated with version/upgrade.

  Go to a LV-built EXE, I try to call a dynamically loaded Subvi. I did it several times with success before, so I think I know how. I prefer to use the call by reference, but I get the error 1003 Open Ref VI (with the type specifier). If I use the type specifier, can I open the Subvi, but the State is listed as 'bad '. Then, I went to recursively through all the subVIs (~ 25 in total) and concluded that the only item with a status of 'Bad' was a type definition.

  I checked several times, several different, that all ways the subVIs (and the definition of Type 'bad') are available to the Subvi dynamics. I did that the type definition is correct. I have also made sure the subVIs are stored as .VI files in the same directory and not within an EXE file. When I try to run the VI run call node, I still get the error 1003. I checked the path that displays in the error dialog box is the exact path for the Subvi (it would be for other VI properties and methods working properly).

  Why can't I run a sub - VI loaded dynamically from an executable if it has a type (a group of 3 trails) as output parameter definition?

  I just tested an idea: rename the library from project to project A create script. Now when it loads, it does not disturb what he must internally with externally called Subvi (dynamic). It worked the first time!

• Application Builder «Browse to LabVIEW.exe» error

  LabVIEW gurus...

  I'm currently building a standalone version of my project.  When I run the application (which is built successfully), LabVIEW makes me search the LabVIEW.exe file.  However, I want this application to run on a computer that will not have installed LabVIEW, and looking up if this file is not an option.

  I know that the reason for this problem is that I use 2 named StrLen and MoveBlock within the library LabVIEW.exe call library functions (to access data from a pointer to a pointer).

  LabVIEW.exe presents itself as one of the dependencies in my project, but I can't understand how to add it to my specifications of generation.  I tried to build a Setup program and include the LabVIEW runtime environment, but this does not work either.

  Any suggestions would be greatly appreciated!

  I'm using LabVIEW 8.6.

  Thank you

  Jason

  In the call to the dll just type LabVIEW without any path. This should work (I used it on 7.1) to automagicallylink it.

  The functions are also in the lvrt.dll which is the main part of the runtime engine.

  Felix

• How to set programmatically a LabVIEW exe * Windows * priority?

  I have an executable of LabVIEW that makes data acquisition to 10 kHz on an ongoing basis and under certain conditions of dumps of these data to a CSV file that is viewable in Excel.  We noticed if the file becomes unusually large and someone tries to open this file so that DAQ'ing is always in course (but does not connect), Excel will monopolize the CPU long enough such that the exe of LabVIEW does not have enough time CPU to extract data from data acquisition until the data in its circular buffer gets replaced.  I could try to simply increase the size of the buffer DAQ, but really, the solution is to have this executable LabVIEW have "priority" over other executables non-LabVIEW (such as Excel.)    Looking at properties VI--> execution--> set the priority seems to only define the priority between other threads LabVIEW but says nothing about how a thread LabVIEW is prioritized to another non-LabVIEW exe.   I have confirmed this by setting the LabVIEW execution property to 'critical moment' and then in the Task Manager and windows reports still his priority as "normal".   How can I set the * Windows * priority of an executable of LabVIEW without having to do it manually via the Task Manager?

  Thank you

  Ninja Edit:

  I should mention that I am building the executable is nothing else than a "master GUI" which generates four LabVIEW modules in sub-panels using static VI refs and displays important data from these four modules persistent "dashboard".   Modules to do all the boring tasks such as DAQ'ing and display data in charts.  Because I am compiling my code in a single executable using the GUI 'master' as the boot VI, set the priority in properties of VI flow down to the modules I load in sub-panels or will only the priority of the Master GUI be changed?  On a related note, should I set four enforcement system 'Data acquisition' modules, then the master GUI to ' User Interface?

  You can try calling the next VI. It sets the priority for the current process and has worked for me in the past on XP.

• Write on the Labview EXE Console Ran STANDARD output

  Anyone know if it is possible to write on the STANDARD of a Labview EXE output when run from a Windows console? I don't want to say calling an external my Labview code EXE using the Exec.vi system and get the standard output of the external exe returned to Labview but rather run my EXE Labview as an application of console se and have the Labview application a pass/fail result final to stdout to the output console.

  I found this post which allows to accept command line arguments, but I have not found a clear method to write to the standard output.

  http://digital.NI.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364

  I found this thread on the LAVAG.org site but unfortunately I forgot my password for my account and my account was under an old email address that I no longer have access to in order to reset it. I tried to create a new account, but it is not allowing me to register a new account. There seems to be a solution to this on the 2nd page of the thread, but due the fact that I can not log on the site, I can't download the solution try.

  https://lavag.org/topic/11719-running-a-LabVIEW-exe-from-the-console/?page=2

  aaronb

  As it turns out, my last blog was about this specific topic. I fell on it as a result of some dll which was not "plays well with other children."

  http://www.notatamelion.com/2016/05/05/aint-Misbehavin-thanks-to-external-calls/

  Mike...

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• Why can I not access / open my outlook e-mail account?

  Why can I not access / open my outlook e-mail account? Recently, I can't open my microsoft office outlook account.  Whenever I try to open it it comes up with the message: cannot start microsoft office outlook.  Cannot open the outlook window.

  I tried to fix it.  When it did not work, I removed & tried to re - install again.  It still does not work & I really need to get to my emails!  I am connected to a remote server, someone else is also related to the so they can access emails from same as me & they have no problems at the moment.

  Why can I not access / open my outlook e-mail account? Recently, I can't open my microsoft office outlook account.  Whenever I try to open it it comes up with the message: cannot start microsoft office outlook.  Cannot open the outlook window.

  I tried to fix it.  When it did not work, I removed & tried to re - install again.  It still does not work & I really need to get to my emails!  I am connected to a remote server, someone else is also related to the so they can access emails from same as me & they have no problems at the moment.

  Try if it works. It does for most people, but one of the posters said recently he did not for him or her.
  Start button > run > type /resetnavpane outlook.exe in the box > OK

  Note (space) between exe and / '.

  If you do not have the option RUN, use the start search box instead.

  Please post back the result.

  t-4-2
  t-4-2

• Why Windows keep moving & hide my files with me?

  original title: make him stop, please stop! Why Windows keep moving & hide my files with me?

  Windows Vista using Media Player 11:

  I am way in music and want to have recorded and named in a certain way.  Sometimes in windows 'Explorer' I group songs into folders according to the albums I create (i.e. mixtures of burning); in this case, I'll keep the names from the same artist and change the name of the album (in properties) that I chose.  As soon as I click on the folder 'Explorer' moves it somewhere, I don't think.  Sometimes things end up in the trash that I know does not recycle.  It also renames my files.  For example, I had a song that I had saved the name of the file is: 01 History.wma; and the rest of the info has been saved in the properties (Album, artist, track number, etc.).  As soon as I turn my head the computer renames it to something that looks like this: 01HistoryAtmosphereSevensTravels - UndergroundRap.wma.  Why it does this and how can I stop it?

  Hello

  ·         It only happens with music files?

  ·         When the issue started?

  Step 1: Run Virus scan.

  Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can do an online scan by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

  Step 2: Rebuild the data base of the media player.

  Follow the steps in http://support.microsoft.com/kb/925718

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why can not only print from widows 7 to my hp6100

  Why can not only print from widows 7 to my hp6100

  Hello

  Probably, you need drivers, please download the following package and install on your Windows 7 computer:

  http://ftp.HP.com/pub/softlib/software12/COL42284/bi-108861-3/OJ6100_1321.exe

  Kind regards.

• Why can't I get help from this program? ___The help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows.

  Cannot run files .hlp in Windows 7

  No, it is not included. Click Start, then type Winhlp32.exe, and then press ENTER. You will get a help dialog box that says:

  Why can't I get help from this program?

  The help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format.

  For more information, go to the Microsoft Help and Support site.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I had to redo my computer why can't use my product key when I installed windows, the first time

  I had to redo my computer why can't use my product key when I installed windows, the first time

  How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us