Why can't move window 7 for all other windows

Similar Questions

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• Hi, I have the 2014 package which includes lightroom and photoshop. Can I move to 2015 for free? If yes how can I do? My photoshop 2014 disappeared and its saying I have a 30 day trial for the 2015. Thank you for the help

  Hi, I have the 2014 package which includes lightroom and photoshop. Can I move to 2015 for free? If yes how can I do? My photoshop 2014 disappeared and its saying I have a 30 day trial for the 2015. Thank you for the help

  Yes, the upgrade is free. means that it is included in the subscription.

  
  

  You can install and activate one of these version according to your choice of 6 CS, CC, CC 2014 or 2015 CC

  If the CC 2015 looms as of the trial, please refer link below:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Let me know if you need more assistance.

  Also mention if you use Windows or Mac computer?

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• Can I get the videos for all of the concepts of photoshop learning?.

  I have an account paying adobe... Can I get the videos for all of the concepts of photoshop learning?.

  All I see is that links like

  CC Photoshop tutorials | Learn how to use Photoshop CC

  Above links are available even without an account.

  Should I have any extra advantage to access additional videos (as in lynda.com where they have the series of videos that explain how to do something with explanation of the concept)

  Originally, there was a selection of 'members only' videos on the Adobe Web site. But this project was abandoned and all content has been made public.

• Why can't remove a flag for "password expires" in a Windows Server 2000 for builitn\administrator domain controller

  The administrator for a Windows 2000 Server domain is set on never, expire but I can't remove this flag, it is locked (grey). Why can't I change this? Please, provide the technical documentation if this configuration is defined by its design.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows 7 IT Pro Technet Forums network.

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/threads

  I hope this helps.

• Why can't move from Windows Vista Ultimate Edition of Windows 7 Professional?

  I installed Windows Vista Ultimate. I bought a copy of Windows 7 Professional (I didn't need all the extra guff - it was useless in Vista, do not be at all an advantage to 7). So why can I not go?

  Hello

  Ultimate Vista to Windows 7 Professional is NOT an upgrade path.

  Windows 7 Ultimate is your choice only upgrade from Vista Ultimate.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Supported upgrade scenarios

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  This is how Microsoft has designed their operating system.

  See you soon.

• I got a new PC that came with Windows Live Mail. I had Vista previously. How can I move an attachment for Windows Live to my existing documents, files from my last PC emt?

  I think above pretty well explains the issue. I have a folder in my documents from my last PC labeled Joe Blow section. How can I move an attachment to a Windows Live e-mail to my existing Joe Blow document folder?

  Hello

  Have you tried to export the e-mail?

  http://Windows.Microsoft.com/en-us/Windows-Live/Mail-import-backup-restore

  http://www.SevenForums.com/tutorials/116162-Windows-Live-Mail-export-import-email-messages.html

• How can I move windows 7 to my new SSD?

  I decided to change my hard disk SSD to improve performance. My windows license has already reached the limit, so I can't reinstall windows again and I don't want to go through all the each setting still or. Is there anyway that I can move windows 7 from my old hard drive to SSD?

  As long as this is the same computer, you can always reinstall Windows 7 and reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  You can clone the installation for the SSD, provided that the SSD is large enough to accommodate the installation to be cloned.

  See http://www.ssdfreaks.com/content/664/how-to-clone-hdd-to-ssd-with-windows-7s-own-software or (easier) use a trial version of Acronis True Image Home 2012.

  Note that, immediately after cloning, you must stop and unplug the original installation. The disc can be reconnected once the DSS started successfully.

  -----------------

  Alternatively, you can use Easeus Todo Backup to move your plant to a SSD:

  Free download EaseUS Todo Backup Freeware and Trial version...

• Why can't upgrade windows 7 Enterprise to windows 10 pro

  Why can't spend enterpise windows 7 to windows 10 pro if I don't need company more?

  because they are 2 different versions.  You must clean and re - open for the company to Pro.  Win 10 is also an upgrade to an existing operating system (and qualifying).  Win 7 Enterprise is not an eligible operating system

• How can I move Windows 7 on a disk with data on it?

  I am running Windows 7 with 64 bit.

  My C: drive is a 223 GB SSD;

  My E: drive is a 931 GB hard drive.

  I want to leave Windows the SSD to the larger hard drive to free up the SSD for the exclusive use of my photo software.

  I found the instructions on moving of Windows on a NEW drive, but not to move it to a drive with the data on it.

  I can do this and if so, how?

  Thank you for your suggestions, you can offer.

  Very respectfully,.

  Larry

  You will not be able to move it to a drive with the data on it. You will need to save everything that is on the E: drive to an external hard disk, uninstall the SSD and reinstall the HARD disk as the default drive and then restore a backup image of the installation on the SSD hard disk.

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Why are you not using https for all your links

  As a company that promotes free software for all why do you use https instead of http with https links, it is possible to have access to the internet with most of the suppliers of wireless dsl even when the service is cancelled.

  freewebhttps said

  http://www.Mozilla.com/en-us/Firefox/Central/
  http://www.Mozilla.org/en-us/LightBeam/
  http://www.Mozilla.org/en-us/contact/spaces/

  They're just yesterday.

  They are https:// when I load them.

• Why can't the Web icon for some of my saved favorites

  A lot of my saved favorites have their correct Web icons.
  However, many fail to save their Web icon leaving the icon of the Virgin.
  The Web Sites in question have specific Web icons.
  I tried to delete the bookmarks in question and the recording of their new without success.

  Why can I not get these icons to save in Favorites?

  URL for Web sites where Firefox will not record the Favicon?

  I would like to be able to view these Web sites, and to be able to look at the source code to see what type of file as the image is and where it is located on the server. If the image is too large, Firefox will not be able to save him.