Why cant the controlfile be synchronized, when you use the backup controlfile

Similar Questions

• Why my T3i keep on recording when you use a card class 10 SD video?

  With a speed class 10 SD card, my T3i will pull only photos, but stops in video.  I use 32 GB class 4 cards lately, just for photography.  The manual says to use a class 6 or higher card, SD when shooting video to reflect faithfully.  Does anyone have any suggestions on why its closing on me?  Thank you!

  He meant a bad quality of the map, no camera brand. 8 ^)

  Low level format you the card in the camera?

  Have you tried a different brand of card? I had no problem with my T3i.

• Why my screen freezes not periodically when you use the PC

  When using my Windows XP PC, the screen will freeze for several seconds or more.  Have to wait what he 'release' before continuing the work on the screen.  This just started happening in the last two months.  I have not changed the computer at all.

  Hello SarahCase,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• Why do I need "Promiscuous" Mode when you use multiple vSwitches and a bridge?

  Hello guys,.

  5.5 ESXi running.

  I created two vSwitches and putting multiple virtual machines in each vSwitch. I have a CentOS VM with two network cards, one in each vSwitch. I configured the CentOS VM to work as a bridge. I could spend between devices on a vSwitch pings, but ping has no devices on a vSwitch devices on the other (through the CentOS acting as a bridge). The ARP requests have been sent across the bridge, but have never had sent answers ARP. I checked around online and someone recommended to enable Promiscuous Mode. I activated the Promiscuous Mode (changing to refuse to accept) on the two vSwitches (which is then applied to the change to all virtual machines). You can read more about that here: VMware KB: how "Promiscuous" mode operates on the virtual level switch and portgroup

  Now all of a sudden, everything works.

  My question is: why?

  I think that I don't want to Promiscuous Mode unless it must be such that it will result in more traffic to each VM it had reached before. I don't really understand why I need to authorize this change, and any help would be nice!

  Without promiscuous mode, vSwitch and port group will only transmit traffic VMs (MAC addresses) that are directly related to the port groups, he will not learn the MAC addresses that, in your case, are the other side of the bridge. The "Promiscuous" mode, all traffic is sent to each virtual machine on the vSwitch and port group and it's virtual machine to decide what to do with the network packets. As you have already mentioned, this isn't a parameter that you want to apply to a large number of virtual machines. For this reason, you can create a second group of ports on the vSwitch with only of CentOS virtual machine and activate the "Promiscuous" mode on only this group port rather than the vSwitch.

  André

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.

  When BindByName undefined, it works as expected.

  I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.

  I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.

  Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.

  Please see the example below.

  ---

  Environment (default):

  Windows 7 Professional 64-bit SP1

  Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT

  .NET framework 4.5.51209

  Local system: EN - UK (but also does not, EN-US).

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Environment (base):

  Windows 7 Professional 64-bit SP1

  Updated Visual Studio 12.0.31101.00 //SEE above 4

  .NET framework 4.5.51209

  Local system: EN - UK

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Call stack:

  	mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal)
  	mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown)

  > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)

  Example:

  ----

  using System;

  using System.Collections.Generic;

  using System.Linq;

  using System.Text;

  using Oracle.ManagedDataAccess.Client;

  using Oracle.ManagedDataAccess.Types;

  using System.Data;

  namespace NoddyConsole

  {

  public class Program

  {

  public static int Main (string [] args)

  {

  Error int = 0;

  Errors += Command_ExecuteReader_BindByName_Fails();

  Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();

  return errors;

  }

  public static int Command_ExecuteReader_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  cmd.CommandType = CommandType.Text;

  BindByName. cmd = true;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  /* *-/

  OracleRefCursor orc = null;

  cmd ExecuteNonQuery()); must fail here

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  /* */

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  BindByName. cmd = true; // ####

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader();

  OracleRefCursor orc = null;

  HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  cmd ExecuteNonQuery());

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  ORC. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  }

  }

  ---

  create or replace package THAT SHAUN is

  type ref_cur_type is ref cursor;

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type;

  end SHAUN;

  /

  create or replace package body what SHAUN

  -TTS000233

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type is ref_cur ref_cur_type;

  Start

  Open the ref_cur for

  Select UO.object_name from user_objects UO;

  Return ref_cur;

  end recreate_issue_1;

  end SHAUN;

  /

  ---

  Thanks a lot to qualify again for me Alex.  I'll try upgrading to the latest version of the provider.

  The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.

  Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.

• When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

  When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

  Make sure that the correct layer is selected.

  Decrease the amount of feathers.

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• I can't get a list of bullited when you use the synchronized text feature.

  I can't get a list of bullited when you use the synchronized text feature. The option is grayed out and no assets. Any tips? I'm doing something wrong?

  It is by default, the synchronized text does not change any style and other visual attributes associated with the instance.

  Thank you

  Sanjit

• No idea why, when you use the Source of the Image changes it overwrites the content?

  No idea why, when you use the Source of the Image changes it overwrites the content?

  Its a really great tool and I want to use it as I have a complicated trajectory I want multiple items to follow, but to have many different PNGs. but when I change them it overwrites the content?

  Thanks in advance

  Scott

  Hi, Scott.

  It is likely that you touch the question where the dimensions of the old image are used when change you to a new image.  It is a known issue for the latest version of edge animate CC and we try to fix it in a future release.  Unfortunately, the only thing you can do is to change the dimensions of the image after you exchange.  You can also copy and paste the path of an element to another, if it would help.

  Hope that helps,

  -Elaine

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?

  RunState.Sequence.Main vs RunState.SequenceFile?  When you use the deployed software?

  Can someone explain to me why when I use something like->

  RunState.SequenceFile.Data.Seq ["Test Seq"]. Hand ["Test not"]. Result.Status

  the status will never be updated if I am set up for LabVIEW Run - Time Engine (but will work for the development of the system).

  Also why->

  RunState.Sequence.Main ["step Test"]. Result.Status

  Update for LabVIEW Run - Time Engine and development?

  I solved my problem with RunState.Sequence.Main ["step Test"]. Result.Status but I'm still curious why the reverse does not work?  Can someone give me please a validation test?

  Thank you very much!

  RunState.SequenceFile.Data.Seq contains the copy of time change sequences. These copies are not at all when running. At run time, a separate copy is made (and is accessible from RunState.Sequence) and only this copy of runtime is updated. These runtime copies are made for several reasons such as the following:

  (1) to ensure that changes to the sequence the runtime, do not affect the original version of the time edit of the file (you don't want to change the status to be an editing tool in the right sequence file?).

  (2) to support recursion, recursive calls in the same sequence have their own copy of the sequence so that State for a call is not crushed by one recursively calls the same sequence.

  There are probably other reasons as well, but these are probably the biggest.

  -Doug