Why convert? What is the advantage? Why convert it before you send the data over the network?

Similar Questions

• you will need to convert wps to doc before you send it. you will need to return to the same formula. How?

  isn't it good that nobody can open my resume.  cannot expect people on the receiving end to convert.  How can I convert it before you send it?

  Hi Jchester,

  Welcome to the Microsoft Answers site!

  Try these methods.

  In the first method, you create a document in Works, and then save it as a Word (.doc) document. In the second method, you use the Works 6-9 Converter to open the Works (.wps) word processing document in Word.

  Method 1

  If you have Microsoft Works installed on your computer

  To convert a Works in Word document, Works to save the document as a Word document and then open the document directly in Word.

  To convert a document Works 6.0, Works 7.0, Works 8.0 or Works 9.0 so that you can open it directly in Word, save the document as a Word document. To do this, follow these steps:

  1. in Works, open the document you want to open in Word.

  2. click on file and then click on record under.

  3. in the dialog box record under , do the following:

  a. replace the area Save in where you want to save the Word in your document format version.

  (b) in the file name box, type a new name (if necessary) for the Word version of your document.

  (c) in the Save as type box, select Word 97-2000 and 6.0/95 - RTF (* .doc), and then click Save.

  Note If you use Works 8.0, select Word 97-2003 (* .doc) the area type , and then click Save.

  d. on the file menu, click close to close the document before you try to open the document in Word.

  4. start Microsoft Word and open the newly created document.

  Method 2: If you do not have Microsoft Works installed on your computer

  If you have a Works (.wps) document that you want to open and you don't have any installed works, you can still use Word to open the file. To do this, first use the Works 6-9 converter in Word and open the document directly in Word.

  Step 1: Download the Works 6-9 Converter

  If you have previously installed runs on the same computer on which Word is installed, the Works 6-9 Converter is already installed and you can proceed to step 2: "Open the Works document in Word."

  If you have not already installed works on your computer, you must download the Works 6-9 converter to open the document in Word. To download the Works 6-9 converter, follow these steps:

  1. If it is open, close Microsoft Word.

  In your Web browser, visit the Microsoft Web site at the following address:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=bf41401e-70fa-465D-ae2e-cf44dbf05297&displayLang=en (http://www.microsoft.com/downloads/details.aspx?FamilyId=bf41401e-70fa-465d-ae2e-cf44dbf05297&displayLang=en)

  2. click on download. The file download dialog box opens.

  3. in the file download dialog box, click Save the file.

  4. double-click on the saved file to start the installer Works 6-9 Converter.

  5. click I agree to accept the terms of the license agreementand follow the instructions to install the Works 6-9 converter.

  Note If you do not agree to the terms of the license agreement, the installation cannot continue.

  6. click on install to install the converter file on your computer. The Works 6-9 Converter Setup now extracts the Works 6-9 file converter and installs it on your computer. You can now open the Works file in Word.

  Note If the file downloads or is incorrectly installed, you can go to the "Next steps" section for help.

  Step 2: Open the Works document in Word

  You can use Word to open a Works (.wps) document file, even if the file was not converted to Word (.doc) beforehand, using the Works 6-9 Converter. Follow these steps to open the Works document using the Works 6-9 Converter:

  1. start Word.

  2. in Word 2000, Word 2002, or Word 2003, click the file menu, and then click Open. In Word 2007, click the Microsoft Office button, and then click Open.

  3. in the Open dialog box, follow these steps:

  (a) change the area Search in the location of your Works document.

  (b) in the area types of file , click on all files (*. *).

  (c) select the Works (.wps) document that you want to open and then click Open.

  4. If the document opens correctly, click file, click on record underand then change the type of file to a Microsoft Word (.doc) document.

  5. save the document and you managed to convert the file to a Word document

  How to open a Works 6.0, a 7.0 Works, a Works 8.0 or Works 9.0 in Word Processor document
  http://support.Microsoft.com/kb/315757

  Hope this has been helpful.

  Thank you and best regards,

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• What is the network access Protection Agent and when should it be on?

  It seems to be disabled by default in the Action Center Security Section.  What does if it is turned on?

  Hello

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer. By default, the startup type of Network Access Protection (NAP), agent service is manual under services.msc.

  See also:
  What is the network access Protection?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-access-protection
  Networking of information that it pros

  http://Windows.Microsoft.com/en-us/Windows7/networking-information-for-it-pros

• What is the network access Protection?

  What is the simplest and most effective way to protect a home/business wireless network? (Other than WEP or WPA encryption).

  Hello RickMetta,

  Thanks for your post.  There are many methods that can help secure your wireless network.  Take a look at some of the literature that I've linked below:

  http://www.Microsoft.com/windowsxp/using/networking/security/wireless.mspx

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  http://TechNet.Microsoft.com/en-us/network/bb530679.aspx

  See you soon

• PC laptop Pavilion 17: what is the NETWORK card in the Pavilion 17?

  This machine is my daughter-in-law. She had a HD crash & replaced the HD. She bought Win 7 Pro 64 bits/load

  on the new HD. I got all operational except for the network card.  I need to load the drivers for the NETWORK card, but I can't find any explanation as to what is the make and model in this machine.  News machine below:

  Model 17-e049WM

  Product E0J75UA #ABA

  SER # 5CD3201PVG

  SYS COUNCIL 1984

  Looks like it's realtek, both wireless and NIC manufacturer. Although the model of the NETWORK adapter is not available, you can download these drivers from here

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&PFID=4&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  or here at HP.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63396.exe

• What is the network latency acceptable in milliseconds for users on a WAN to come?

  I heard number as 125ms being a number to shoot for VDI and good user experience, but what is the number of the real world?

  Acceptable latency is the right number until all of your users start to complain that this document, http://www.vmware.com/files/pdf/view/VMware-View-5-PCoIP-Network-Optimization-Guide.pdf, said shoot for less than 250 ms.

• How can I get TB in my Mac ask me before you send the messages in the Outbox?

  Something has changed and TB is now send messages that I created to send later (that are in the Outbox) without asking me, as soon as I re - connect to a network (i.e., it stores them correctly in the Outbox but if my phone loses the network - because for example I close to home - once he reconnects it sends all messages without asking).

  I have a Mac and I can't find the advanced options > settings network and disk space that (https://support.mozilla.org/en-US/questions/1004514) indicates that the solution.

  Any help would be greatly appreciated.

  Thank you!

  Use this as my guide http://kb.mozillazine.org/Menu_differences_in_Windows, _Linux, _and_Mac

  Try
  Thunderbird > Preferences > advanced > network and disk space

• What is the "network error occurred" on the blu ray

  What is "network error has occurred", when you try to open Netflix and other applications

  I was also getting the problem of "a network error occurred" on my BDP-S590.

  I have read many solutions complicated this same question in this and other threads. And so I tried the very complicated (manually setting IP and DNS) proposed solutions without success.

  I went to http://esupport.sony.com and used the chat feature. "Levy" was good enbough to do this VERY simple solution:

  1. turn off the Blu Ray player

  2. unplug the power cord of the player blu - ray of the socket.

  3 plug the power cord into the power outlet.

  4. turn on the blu - ray player.

  5. check if the problem is resolved. (It was for me).

  Hope that helps...!

• PDF form: blocking of the fields before you send it by e-mail

  Hello!

  I have to scratch my head with this problem for a while: I have this form must be sent by email with some locked fields (read-only).

  What I do is affecting this BEFORE as I have the e-mail form:

  fieldName.access = "readOnly";

  app.execMenuItem ("SaveAs");
  

  However, the form always happens at destination with the field unlocked and ready for editing.

  Am I missing something?

  Thank you for all the ideas!

  Marcos

  
  

  Hi Marcos,

  Just check first that the changes script preserve is set to automatic.

  

  Then, make sure that the script has completely executed before e-mail script. It might help to put the script to access the mouseUp event that fires before the click event (containing the saveAs script).

  I then test this separate for the mail script and see it works on the local PC.

  Hope that helps,

  Niall

• New Win 7 computer cannot access the IP address of the network printer. Help, please.

  Greetings,

  -----------------------------------------------------------------------------------------------------------------------

  UPDATE: we have found the solution to this problem, we, and that I posted an explanation as well as two ways to solve the problem in my 2nd post on May 5, 2015. Scroll down to it for the solution. Unfortunately, Microsoft does not allow the OP to mark one of their own messages as 'the Answer' so this thread continues to be listed as "no answer" when he actually answered me.

  -----------------------------------------------------------------------------------------------------------------------

  The original message follows...

  We cannot sign a new Win 7 (64-bit) computer to a printer ethernet established in our local network of 'working '. We have reached the limit of our troubleshooting skills and expertise assistance.

  Our Local network
  ------------------------
  The printer is a Dell 5100cn workgroup laser that is connected via an ethernet cable to a 10/100 workgroup switch 5-port Cisco/Linksys. The switch is connected to the built-in cable Motorola modem / 4 port gigabit router / WiFi access point. There is no server between the printer and the network.

  Other computers on the network run also Win 7 and have no trouble seeing and using the printer. Some computers are connected via a gigabit ethernet cable to the router Motorola. Other computers connect wireless WiFi (once again, by the same Motorola device). All computers, including the new ones, are attributed to the same workgroup.

  The printer has a static IP address. It also has an integrated Web page accessible within the network via a browser to view the status of the printer. All previous computers can view the status of the printer Web page by entering its IP address in a browser.

  The new Win 7 computer
  --------------------------------
  At the Windows command prompt, we successfully ping the IP address of the printer and received a return signal. However, we are unable to connect to the IP address of the printer (and status Web page) with a browser. And we cannot find the printer when install us the printer driver. We have tried to turn off the Windows Firewall and it did not help.

  When we install the driver, move us as a 'local' printer and create a new "Standard TCP/IP Port" for her. We enter the static IP address of the printer and name the port. Define us the Protocol to "LPR", enter the name of the queue ("lp") and activate SNMP State with name of the 'public' community and the index "1". These settings have worked very well with our previous computers.

  When the time comes to 'choose printer', we select 'have disk... '. ' and use the Dell 64-bit for this printer driver. But it does not work and do not print a test page. We even tried to install the printer as a 'network' printer driver, but it does not, either. In addition, the 'local' method always seemed to work best in the past.

  The new computer has no harm to see other computers and devices on the network. For example, there is a NAS connected to the same switch Cisco/Linksys like the printer and the computer can access the NAS via its static IP address. The new computer can also access the internet. He can't use the IP address of the printer. We even tried to change the address IP of the printer, but that did not help either.

  Despite the fact that the work - the network troubleshooter Windows command prompt ping indicates that the printer is not responding. What do we lack? Help, please.

  Greetings,

  I hope that this will be our last post on this subject. We have discovered the source of the problem and can offer two 'fixed' in case someone else runs into the same situation.

  With the help of MSConfig and a process of elimination, we have disabled non-Microsoft services that were running on the computer until we discovered that "Qualcomm Atheros Killer Service V2" was the source of the problem.

  Explanation

  ----------------

  Our new Win 7 computer contains a communication module ethernet/WiFi/Bluetooth e2200 Qualcomm Atheros. The manufacturer provides a '' Killer Network Manager '' for this system. Its purpose is to monitor and control the flow of data over a network connection in order to optimize for. For example, the user can choose to give the program A high priority and program-B low priority. This ensures that the program-A is less lag in the network traffic.

  The primary market for this function, so far, has been the online game (where the name of 'Killer'). It allows players to channel the bulk of the bandwidth available to their game and away from other programs and services that are running at the same time. A response faster online gives the player the advantage it needs to get "kill him" before someone else.

  This system of control of bandwidth has interfered with data packets of return of our network, clearing communication between our computer and our printer printer.

  Difficulty 1

  --------------

  The simplest solution for us was to disable 'Qualcomm Atheros bandwidth control' for the ethernet NIC that has been accomplished by going to: Windows Control Panel > network and Internet > Network and Sharing Center > change the settings of the card (in the sidebar). Then we clicked on our connection to the LAN (our NETWORK ethernet card) and select the 'Properties' command Finally, on the Networking tab, we have disabled 'Qualcomm Atheros control bandwidth' and clicked 'OK' button to close.

  All that was needed after that was a quick restart and we were able to access our printer even with the killer Network Manager and functioning of Qualcomm Atheros Killer Service V2.

  Either way, we left the control function of bandwidth enabled for wireless (our) network connection because we do not plan on using this network printer when the computer is untethered to ethernet.

  Difficulty 2

  --------------

  If you don't want the killer running Network Manager on your computer, you may be tempted to uninstall. Do not! Uninstall will also uninstall the drivers needed for your ethernet, WiFi and possibly your Bluetooth as well. We heard that some users have communicated with Qualcomm and were able to coax, on their part, the necessary drivers comm without luggage "Killer". But you don't need to do it, either.

  All you need to do is: (1) remove the 'Killer Network Manager' of the '"start up" folder of the start menu of Windows (under "programs") and (2) using MSConfig, uncheck "Qualcomm Atheros Killer Service V2" under the ' Services ' section. Then reboot and you're good to go. The killer Network Manager and his service will not work.

  Moreover, the reason for which we did not chose this method, ourselves, is because we see one deserves that available Killer Network Manager so that we can block network traffic to select programs. Solution 1 converts this easy thing because the Ethernet bandwidth control can be quickly activated again if she is ever desired. And we're leaving it enabled for our WiFi.

  Best regards, David-EH

• How to remove names and addresses email of others on an e-mail before you forward the email to someone else?

  How to remove the names before you send an email?

  I can not get rid of peoples names and addresses in an email I want to forward. A lot of people don't want to share their email address with people they don't know. I tried describing remove them and hit. Tried right click and delete not even appear... I know how to train my own emails and shows not all of the names and addresses, but not the how to transfer one who already has listed in view.

  Left click to Hylight names, phrases, etc. that you want to remove, hold down the left button.      Right click on 'clear '. The hilighted words disappear.

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• What is the best way to convert 37 000 photos in iPhoto in Photos

  I have a file with 37 000 photos iPhoto. I wish I only know how to use an Apple S/W photos, that's why I want to convert my new photos have been involved in the Photos!

  What are the best options to convert 37 000 photos in Photos?

  Is there a limitation on the number of photos Photos can hold/grip? It will run in degraded mode?

  Should I have / is it possible to have more than one library? If so, does that mean that I lose a search function, i.e. I should search in each library, if I want to find something...?

  All comments and ideas would be instructive.

  There is an option - migrate the iPhoto photo library - it is good to change first the iPhoto library - see these advice Notes on the migration of an iPhoto for iPhoto to Photos for Mac library

  No limitation on PHotos photos - your disk space is limiting - large libraries do not slow down it (I have a 20 000 library and library one 80 000 photos (not ready to pay for the space to her iCloud))

  You can have several libraries of Photos, but you cannot search through them (PowerPhotos can help with this if you want multiple libraries)

  LN

• What is the purpose of VTEncoderXPCService and why should I use so much CPU?

  As you can see in the image as an attachment, it consumes about 300% of the power of my CPU:

  

  This causes in turn my MacBook Pro CPU to heat and speed up the rotation of the fan.

  What is the purpose of this process? Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  Thank you.

  Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  As you probably know, the conditioned XPCservices which can access the sandbox of a request and securely communicate with him. When you import new media or migrate a photo library, it will create thumbnails and previews of media in the library.  'S done it by background processes began to take photos. These will be run and is same photo is apparently inactive. After the importation of the new media, it is best to keep the pictures running overnight to get background processing as long as you don't need a mac for other tasks.

  VTEncoderXPCService and VTDeoderXPCService convert your videos. If one of them is hogging all processing power, this may mean that you have a lot of videos in your library requiring a conversion or one of your videos is damaged or uses a codec that cannot be treated by pictures. Have you recently to import new videos or migrate a library with videos?

  If a video cannot be treated, remove it from your photo library.  To find the culprit, try to read your videos into pictures.