Why ctrl + d does not work (after 11_2013 update)? CTRL + SHIFT + d is OK.

Similar Questions

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• AutoFill does not work after last update 3-6-3

  AutoFill does not work after last update 3-6-3

  is after update

  See control if Firefox automatically fills in forms

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• DVD Player & touch screen does not work after last update DX1210 to Windows 8

  Hello
  I know. I should have checked the upgrade information before doing so, but I have upgraded to Windows 8 about 3 months ago and my DVD player and touchscreen no longer work. I don't know what else does not work.

  I searched drivers but can't seem to find a.

  Can someone point me to the right direction?

  Or do I restore to original settings - Windows 7?

  Which brings me to my second question. How to restore? I did not have a backup, but I left all my data on a hard drive.

  I can't find any help on any of these challenges.

  Thanks in advance.

  To be honest that I n t have this unit and don t have experience with it but I ve checked Toshiba to THE support page and of course, this model is not supported for Win8. What you need are utilities and tools specific to Toshiba.

  In my opinion, if the device is not fully supported you should go back to original Win7 and supported.
  I put t know why you didn t follow the Toshiba s advice on the creation of recovery media. From my experience, that the recorded data are unnecessary, and you will not be able to start the recovery image installation.

  What you need now is the recovery disk. Visit the Toshiba page if there is possibility to order a new. Otherwise contact the closest service Toshiba and ask if they can help you with this.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.