Why do I defragemented files after I defraged

Similar Questions

• Why should I defrag my computer

  Defrag

  Why should I defrag my computer every 2 or 3 days

  If you do not have your files, but you don't have to become progressively more fragmented. If you defragment every 2 or 3 days or less often, it is up to you to judge.

  However, the defragmentation is only a certain number of tasks which serves the best performed on a Windows XP computer after Outlook Express compacting and deleting unwanted temporary files of routine. Have a fixed maximum = minimum pagefile will reduce the rate of fragmentation. It also contributes to your regular maintenance for the time before you run a complete antivirus or anti-spyware scan or a large download / install new program...

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• Why do I see. jpg.swp files after importing the photos?

  Filling of additional files with my hard drive. JPG.swp files after I import photos from a camera or memory card.

  What is?

  Why this happens for some files but not others?

  What can I do to stop what is happening?

  My guess:

  * you have auto-save XMP and Lightroom think he should save XMP, but has a problem doing so, and eventually leave the remains of jpg.swp instead...

  In any case the problem is caused by the inability to re - write the files jpg, which usually occurs only (not scheduled) during the recording of metadata.

  For the workaround for now:

  * turn auto-radier XMP, and/or

  * without saving the jpeg metadata.

  Long term solution:

  * Adobe must obtain their ship handling all of the metadata of jpeg, and if I hadn't my way, an option to re - write the original files and metadata for all types of files and virtual copies as xmp sidecars.

  In my opinion, if jpeg (or other metadata) cannot be saved correctly, the user must be notified, a repair option should be re - write jpeg with the new block of metadata includes all metadata salvagable.

  If I could be something here?

  Rob

• Why my dvd player on my computer will display file after loading adisc stop mode

  my dvd on my computer drive show that stop mode file after loading on it does not show movies

  Hi Carolina,.

  (1) this only happens with some specific DVD?

  (2) if it works well before?

  If I understand correctly you want movies to start playing as soon as a DVD is inserted, if please correct me if I misunderstood or provide additional information to help you better.

  
  Method 1: you can follow the steps mentioned in the link below to solve problem of AutoPlay
  AutoPlay does not start when I insert a disk or connect a device.

  
  Method 2: Alternatively, you can play the video files manually. To do this, follow the steps below

  (a) click Start, go to computer, and then open the DVD player

  (b) now, try to play the video file by double clicking it

• I can't save my PDF files. When I hit Save as an empty window appears instead of a menu of files or folders Windows Explorer view. I'm a Publisher and save files under new names of files after changing them. Why can't I just save these files in Adobe DC (

  I run Acrobat Professional so that I can change/brand place/comment in the PDF files. At one point recently I noticed "Acrobat Reader DC" in the name of the file at the top of the page. I do not have ask this or do anything to get there that I was aware of this. I adjusted for the new look of the screen and edited several files without incident. But yesterday, I opened a large file which had been addressed to me in Dropbox. When I downloaded and opened it and tried to change it, the selection tool was not aligned properly, so the selected areas were elsewhere on the page, where the cursor was. I restarted my computer and was able to change the file more or less normally (I noticed more little glitches with this CD player but I can live with them). But when tried to save the file with a new file name, like I always do to differentiate files that changed since the original files, the save window is empty. There is no option to save the file with a new file name. In fact. There is no option to save the file with the changes! I thought maybe it was a problem with this file only, but when I tried to edit a file provided by regular e-mail, I met the same problem trying to save to a new file name. What is the relationship between my old Acrobat Professional and Acrobat Reader DC? Why can't save files normally? I managed to save the changes I did by saving it in the cloud to Adobe (I had to then because I could not send the file by e-mail because of its size - I tried to send it to me)., but I'd rather widely navigate in Windows Explorer to work with files. I suspect that there is some simple aspects about what I am simply absent or do not know. Can anyone help?

  Hi Nathalie,.

  Please take a look at this thread and let us know if we get to the brand:

  "Save as" box pop up does not allow me to save the document.

  Best,

  Sara

• Removal of WAV files after you create AAC version in iTunes

  I recently deleted about 5 GB of iTunes WAV files after their conversion to AAC files. I chose to "move to trash" and then empty the trash. When I rebooted my computer, there is about 5 GB of free storage added to my HD but not the Audio storage, which has not changed. I forgot to check the free space came as I thought it would be audio.

  I tried manually deleted WAV files and they do not appear on my HD, only new AAC versions I created. I'm curious to know why the Audio storage did not change at all, even if the files are audio files and seem to have been properly removed from my HD. I wonder if they were not stored somewhere else and if so I want to make sure that they have been deleted. What worries me is that my iTunes library is 94 Go yet my Audio storage is 126 GB. I understand Garageband, etc. takes place, but the gap seems to be excessive. Please help/explain whether you have any ideas!

  Much appreciated!

  You'd better ask about the way in which the information system is referred to in the forum system for your computer. If it were me, I'd be just glad if you removed 5 GB of files 5 GB have been released.  If you want more details, try a specific tool like OmniDiskSweeper: https://www.omnigroup.com/more/

• Why my games crash immediately after clicking on the icon?

  original title: After double clicking on the icon of the game, the problem windows window appears and says it checks for a solution.  I can't understand how to solve this problem.  It does not occur on all games.

  Why my games crash immediately after clicking on the icon?

  Hello
   
   
   
  1. what game you play when this happens?
  2. have you ever run properly on your computer?
  3 did you changes to the computer recently?
   
  
  Method 1.
  Play this game in the clean boot and then check if it works very well.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
   
  Method 2.
  I would like to look at the logs of the same observer. Here's how you can pull up the newspapers:
  Type eventvwr.msc/s in the address bar.
   
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In a deiail window why tags change or disappear after it is defined?

  In a deiail window why tags change or disappear after it is defined? I have to put each time I have beyond the window

  Hello

  1 are. what file you referring?

  2 does happen with all the files?

  3. Since when are you facing this problem?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Method 1: Add tags or other properties to a file: http://windows.microsoft.com/en-US/windows-vista/Add-tags-or-other-properties-to-a-file

  Method 2:

  Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Why delete the temporary file?

  Why delete the temporary file?

  because temporary files are of no use to us and toff are created for temporary use so after use keep them in our system, as resulting from the decreade of memory hard drive and also a lot of downturns and vaults of virus, so it is better to delete the temporary files u can try one of them to make the best management of your temporary folder

  1. search for folder or folder type in the run command and delete everything in the temp folder
  2.u can also use tune up utilities software
  3. famous is ccleaner it's free, you can download it and use it

• Why my alert log file is not updated

  Dear all,

  Please find below my workplace

  OS - Windows server 2012

  version - 11.2.0.1.0

  Server: production server

  I checked my alert log file, there is no entry in recent day. He finally stopped on August 31. Please find entry line last two in the alert log file

  Mon Aug 31 10:30:23 2015

  Archived journal 72088 extra for each sequence 1 79292 0x38b3fdf6 dest ID thread entry 1:

  Why it is not updated after August 31.

  Please help me on the rest of my points

  (1) is there a way to know why he is not up-to-date.

  (2) If an order wrongly manually to alert the log entry, so how can I take to update as usual.

  Please make sure that you review the correct alerts log by using the following query:

  SELECT THE VALUE

  V $ diag_info

  WHERE name = "Diag Trace"

  If this is the right place, then perhaps there is no activity that should be recorded in the log of alert since August 31.

  You can manually print something for journal alerts to check this using:

  Exec DBMS_System.ksdwrt(2, 'TEST');

  Alternatively, you can manually run the command of journal and see if new lines are written to the log of alerts using the following command:

  alter system switch logfile;

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• Why my colors appear dimmed after the recording through photoshop?

  Why my colors appear dimmed after the recording through photoshop? When you record directly from bridge they appear sharp and vibrant, but after taking a recorded image and open in Photoshop and resave after retouching, colors appear then faded and less saturated on this picture.

  Always convert to sRGB, whenever a file is needed to correctly display without color management.

• in acrobat pro DC, I can't re - save files after making changes and the number appear in what looks like Arabic?

  in acrobat pro DC, I can't re - save files after making changes and the number appear in what looks like Arabic?, I run repair and rebooted the computer several times now...

  Ann Chinsang wrote:

  I can not re - save files

  Why? What is the procedure that you follow? What is the error message?

  Ann Chinsang wrote:

  number appear in what looks like the Arabic

  -What are you talking about? When you try to change the numbers in my document; it evolves in Arabic numerals

• Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Hi larrys57575985,

  To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

  Best,

  Sara

• Add a temporary file after failover

  Hello
  We have a configuration of Guard (10g 2 node windows 2003 RAC ASM, r2 server) data. After failover to the backup system and run some queries, I discovered the following messages in the alert log:
  ATTENTION: The following temporary tablespaces do not contain any file.
  This condition can occur when a backup controlfile
  been restored. It may be necessary to add files to these
  storage spaces. This can be done using the SQL statement:
  
  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE
  
  Then I issue the following command
  alter tablespace temp_ts add tempfile '+ DATA' size 100M;
  
  I have a few questions about this behavior:
  (1) in my old primary school, it has the temporary file. Why there is no temporary file after failover?
  (2) passage to the require also add tempfile? As we use ASM, we add a temporary file for each passage?
  
  Thank you very much in advance.

  (1) in my old primary school, it has the temporary file. Why there is no temporary file after failover?

  TempFiles must always be added whenever the controlfile is recreated. That's why they are temporary, they can be dropped and re-created at any time. Consistency of databases has no dependencies on temp. When the configuration of data protection has been initially implemented, he need to instantiating a standby and had to be done through backup. I clone data bases often and I often forget to add the tempfiles after creating a clone. This happened during the day before was originally instantiated, any tempfiles have been added. You switched to the night before and realized that there is no tempfiles.

  (2) passage to the require also add tempfile? As we use ASM, we add a temporary file for each passage?

  Passage to the should not require to add tempfiles, because the controlfiles are not re-created. Check the data dictionary by selecting the name from v$ tempfile, if she comes back with no line, the database currently has no temporary file.