Why do my work order plan getting all messed up when I try to add new work plans?

Similar Questions

• HP ENVY 7640: all new HP ENVY 7640 gets msg "Printer busy" when you try to fax doc to computer

  All the functions of the printer I checked so far work very well: copy, fax directly from the printer receive fax, scan to computer, etc..  But I get msg "Printer busy" when you try to fax doc to computer.  My installation conforms to guide: distinctive ring (double ring), I phone DSL and voice on the same line, using same USB cord and USB installation as I did with my just-replaced Officejet 6500 a.  Line number two.  When I call the number assigned to fax from my phone it double rings and sends fax tone.  Why get 'Print occupied' msg?

  Thank you, for your advice Sanal.  It was good advice, but it was the same steps that I had performed several times over the last few days.  It was also the same steps as your colleagues made when they took my computer in 12 hours of chats on Sat, 10-1.

  After submitting an online support request, fill out an information form and obtain a case number that I got phone contact (888-747-8338) yesterday (Thursday 10-7) w/another of your colleagues (Dennison) and during a 2 hour session he did not recommend, without success, then uninstalled the 7640 WANT and also the old HP 6500 has software installation re-installed, always without success.  Finally, he decided to reset the printer, a procedure that is not in any documentation I have or which has been described in troubleshooting online that I could find on your website, but it is true, my research is not comprehensive, just a vast.  It was something I had to do it manually, with Dennison tell me over the phone how to proceed using the console printer poster and associated buttons.  I had the feeling that it was a last resort, and fortunately, he finally managed!  I can now fax documents from my computer!

  Sorry to not return you earlier, you may have resulted in the same solution over time, but it would have taken to always back and forth.  In any case, thank you for your response.

• I get this error message when I try to install "the resources required are missing" what is this all?

  I get this error message when I try to install "the resources required are missing" what is this all?

  I've had photoshop for years, it has stopped working last week - I think he suggested I have try to reinstall so I uninstalled and when I try to reinstall is give me this error message!

  "Required resources" that is that all?

  The product is not tested on the operating system you are using, so it may or may not work on it.

  I suggest you to upgrade to creative cloud and use the latest Adobe Photoshop CC 2015. See, Lightroom and Photoshop | Plan of creative photography of cloud of Adobe

• Director - I added an audio file, but when I try to add another mp3, all I get when I play again is static

  I added an audio file, but when I try to add another mp3, all I get when I play again is static. Why?

  You might have better results if you converted audio files
  to the. Format WMA before you import into Movie Maker.

• Why do I get an error message when I try to download creative cloud on my new mac laptop?

  Why do I get an error message when I try to download creative cloud on my new mac laptop?

  There are MANY messages of error... which is yours?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• Why do I get access denied error when I try to connect to the printer?

  * Original title: Please help me

  Why do I get access denied error when I try to connect to the printer?

  Hello

  Try right-clicking on the printer software when installing it and select run as administrator.

  See you soon.

• When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  Please close Lightroom and then go to the following location in the Explorer: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Develop Presets\User Presets

  Paste the predefined settings file in the location above, then try to open Lightroom and control the Module Development, if you are able to display Presets or not.

• I'm working with Acrobat XI and when I try to add text to the geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I'm working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I thought about it... need to use the defined comment tool, not the set of editing tools.

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Get the error 0xc00d11cd when you try to connect to applications

  I have a Microsoft Surface with Windows RT and since I got it I could not connect to most of the applications and others cannot access the internet at all.

  When you try to connect to all the apps from Microsoft I still get error 0xc00d11cd (0x82bc0005) and it just says: Please try again.
  This happens in music, video, games and apps Xbox SmartGlass.
  Also I tried multiple games, including all the Xbox games and other apps like Shazam simply cannot connect to the internet or connect to all the.

  Looks like people, email, SkyDrive, shop, E-mail and weather join the end network.
  Troubleshooting my network found no problem

  I tried to uninstall and reinstall applications and making a whole "refresh your PC" without success.

  Any help?

  Hi, jonathons11a
  in fact, this is the case, I had the same problem and he went just by logging on XBOX.com
  I maintain the money account, but the service works well.

  I think that this must be marked replied.

• No preview image deployed when you try to import new images, no possible imports all the

  Hello

  I use Lightroom 5.7.1 on a 'Late 2012 iMac' with Yosemite OS X.

  I installed Yosemite first and then Lightroom 5.

  After that I encountered the first problem (no preview images shown the import module when you try to import new images, the central part of the screen remains black, now shaded not extracted, nothing, no possible to import at all), I tried all possible changes to checkboxes and preference settings.

  After reading dozens of Internet Forum articles on very similar problems seem to many other users, I even deleted all preference setting files in the OS X Finder (a recommendation that has been said to succeed), however, the problem remains.

  Also, I completely deleted the software entirely from my iMac (including all the system and setting files), downloaded the latest version (5.7.1) Adobe, rebooted the system, installed new Lightroom, even restarted again, WITHOUT SUCCESS.

  What could I do? As I can't work at all with Lightroom, I would be very happy to get any help on this issue.

  Best regards

  Thomas.

  If the Destination Panel does not appear.

  You must make the Destination panel displayed on the right side by right-clicking one of the other items Panel (like "file management") and then place a check next to the Destination

• I get this error 0xc0070652 when you try to install a software

  I get this error 0xc0070652 when you try to install a software, said a facility is underway and should be completed before the new installation is allowed. There is no other facility that I can tell, there may be a stuck somewhere. Please help, thanks in advance...

  You can check the registry key below all pending installs.

  Check the following registry key and clean all entries in the key, you will find:

  Go to the ORB start, type regedit and select access.
  If you receive the user account control dialog box that says, you want the following program to make changes to the computer?, click Yes.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Highlight: HKEY_LOCAL_MACHINE \Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Check the following registry key and clean all entries in the key, you will find:

  HKEY_LOCAL_MACHINE \System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Thank you

  Marilyn