Why do we file or drive to vote vote

Similar Questions

• Adding a voting drive. Can we have more than 1 drive to vote?

  Version: 10g R2
  
  In the documentation, I read the following command adds a voting drive. But, can we have more than 1 drive to vote at the same time?

  crsctl add css votedisk /dev/raw/raw4

  read this, it will help you
  Reference:-issue voting disk

  answered by Silva

  (1) why don't we not create an odd number of voting record?
  With regard to the vote of the disks are concerned, a node must be able to access exclusively more than half of the discs with the right to vote at any time. So if you want to be able to tolerate a failure of n disks to vote, you must have at least 2n + 1 configured. (n = 1 means 3 discs with voting rights). To you can configure up to 32 disks with voting rights, to the providing protection against the 15 simultaneous disk failures.
  Oracle recommends that customers use drives 3 or more with right to vote in Oracle RAC 10g Release 2. Note: For best availability, 3 files of voting should be separate physical disks. It is recommended to use an odd number as 4 drives will be more highly available than 3 disks, 3 1/2 is 1.5... rounded up to 2, 4 1/2 is 2, once we lose 2 discs, our cluster fails with 4 disks with voting rights or 3 discs with right to vote.

  (2) only the cluster checks actually for the counting of the votes before node eviction? If so, could you expain this process briefly?
  Yes. If you lose half or more than all your discs with right to vote, then nodes get evicted from the cluster, or nodes to expel from the cluster.

  (3) what is the logic behind the documentaion note which says "each node must be able to see more than half the disks with right to vote at any time"?
  The answer to the first question is will also answer this question.

  Source:-issue voting disk

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan

• Why do my files appear in all directories

  Original title: Windows 7 backup file

  I know I'm missing something, so I need some help, please. I have Windows 7 with Office 2007. When I open my directories there are 4: Documents, music, photos and videos. I tried to open a file in the Documents and I have seen the same document in the other directories and also listed under my Computer OS (C). Why do my files appear in all directories? Please advise me.

  E-mail address is removed from the privacy *.

  It is a forum for peer-to-peer volunteers.

  It may take some time for people to respond.

  Directories such as the 'Documents', 'Music', 'Images' and 'Vidéo' are really (in the way which view you them from the menu of the Start button or office) "links" to the actual locations.

  • 'Documents' folder is in one place:
    %UserProfile%\Documents
  • Your "Music" folder is in one place:
    %UserProfile%\Music
  • Your "Pictures" folder is in one place:
    %UserProfile%\Pictures
  • Your 'Vidéo' folder is in one place:
    %UserProfile%\Videos

  '%UserProfile%' is an environment variable which translates by (your computer translated for you when typed in / used) the path for the connected on the user profile directory.  By default, this would be C:\USERS\USERNAME.

  Now - there are "Public" places in each of these users on the same computer could share things between them.  These places is...

  • %PUBLIC%\Documents
  • %PUBLIC%\Music
  • %PUBLIC%\Pictures
  • %PUBLIC%\Videos

  The mention "PUBLIC %" is an environment variable which translates by (your computer translated for you when typed in / used) the path to the directory of the user PUBLIC profile.  By default, this would be C:\USERS\PUBLIC.

  And if that's not enough for you - there is a way to be able to view each of these folders (your Documents and public acts, your music and music Public, etc.) in one accessible place - by using the feature of "libraries".

  Even when viewed using libraries - however - the physical location is always singular.  If you put something in 'Documents', it is (by default) will '% USERPROFILE%\Documents' (C:\USERS\YOURUSERNAME\Documents\) and not the case elsewhere.  You should be able to see from the icon from your desktop to the 'Documents' or 'Documents' library, but they are just pointers/links/fancy shortcuts to the ACTUAL physical location on disk represented by '% USERPROFILE%\Documents' (C:\USERS\YOURUSERNAME\Documents\).

  Make sense?

  Think more if it is not.  Here's the easy way:

  Your stuff is on this drive here:

  • %UserProfile%\Documents (default: C:\USERS\YourUsername\Documents)
  • %UserProfile%\Music (default: C:\USERS\YourUsername\Music)
  • %UserProfile%\Pictures (default: C:\USERS\YourUsername\Pictures)
  • %UserProfile%\Videos (default: C:\USERS\YourUsername\Videos)

  You can just get in these physical locations via different paths.  They all end up in the same end-location real.  You do not have many copies of the files.  (You have not more than one copy of this large video file that you created, UNLESS you make a copy.  "It is SIMPLY stored in %USERPROFILE%\Videos (C:\USERS\YourUsername\Videos).)

• Why the SAN disks and drives NAS recognized differently by the computer?

  Hi all;

  I'm a newbie in the sharing of storage.
  Why the SAN disks and drives NAS recognized differently by the computer? Computer sees SAN disks as local drives, NAS drives as network drive, even if they are all connected to the computer by the same network topology.
  I knew that SAN uses the block level transfer to transfer data all in SIN use level file transfer. Is that what this has something to do with which SAN and NAS drives are recognized differently by the computer? If so, how?

  Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• How to move data files from drive C to drive E in MS SQL Server 2005 used for hyperion

  Hi all

  We have installed Hyperion with MS SQL Server 2005. Hyperion 11.1.1.3 works well.

  But in the SQL server data files will register in C drive only. But we have to back up the files in drive E.

  I used the Attach and Detach method to move files from C drive to E drive.

  After that, I am reconfiguring the EPM system. but I get errors in the configuration.

  Now I get the planning of database failed when Confiuring planning.

  Configuration of data source interface has failed in the Configuration of EPMA.

  Please suggest the best way to make this scenario.

  
  

  Thank you

  Mady

  Why do you need to reconfigure after that move data files, if it is done properly it should be without data loss.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Why "develop the capacity of drive" lasts forever?

  In Workstation 8.0, why "develop the capacity of drive" lasts forever? The disc is preallocated, then it should have been just a few miliseconds operation (change a pointer or two). Or do you have some "genius" decided to fill the disk with zeros in the first place or something? (Seriously, fire that one!).

  Slightly embarrassed, as you can probably. He's been at it for several hours already (increase in the size of 400G).

  A sparse disk (not previously affected) contains the metadata at the beginning, including a directory of grain and grain tables, that point to a single block of 64 KB of data each (a grain). At the sparse disk size increase, these metadata should be expanded to address additional data blocks. So what happens is that a new vmdk file is created with existing extended metadata and then all the data (grains) of the vmdk file is copied to the new vmdk file. Once completed, the old vmdk is deleted and a new is renamed to the old name.

  André

• How can I back up my drive to vote under windows

  I can back up disk of voting with dd on unix, but how can I save in windows,
  
  I replace my disk storage in ORACLE rac enviement, I need to reistall's operating system; OCR and voting disk (restore database); or I can restore ocr and drive to vote than to restore the database; you have any idear

  You can use the ocopy command in Windows environments or use crsctl commands to copy and manage files

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• How and why does a file name as 20160312103251.m2ts becomes 0003.mts?

  How and why does a file name as 20160312103251.m2ts becomes 0003.mts?

  How to make the .m2ts in a .mts?

  Hi HiView,

  .Mts and .m2ts file extensions is not a real difference as these two are associated with AVCHD files. The file extension can differ depending on how you import the files on your computer. Files that are imported by drag and drop, or transfer them without using PlayMemories House are registered as .mts files. While those who are copied using PlayMemories House are read as .m2ts files. You can change the file extension and also rename the whole file, clicking on the video, then select Properties. The file name and other data will appear to the right of the window. You can then rename or change the format of file through this tab.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Problems with .dll and WPD files Volumn Driver Windows files is installed but does not work

  I wondered about the .dll files... I have internet explore as a default package as well as Java (TM) web start launcher by Oracle. Can you suggest other programs. I have all the Adobe programs. I would really be able to bind the DLLs of Visual Basic... but VB 08 also do not install and run on my computer, but also the Framework.NET version 4. Be an error in C:\Windows\system32\mvsvc.dll

  I couldn't install Windows WPD files Volumn driver and here's the windows diagnostic ran for me: what can I do to get this driver to run. Device in Windows systems manager is not supported on my system.

  Description

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: wpdbusenum\fs

  Configure the class GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a}

  The PnP problem code: 0000000-a

  Driver name: WUDFRd.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  DMI9C45.tmp.log.XML

  LOG9C46.tmp

  wpdfs.inf

  Thank you. I tried for days now to get this driver to run.

  Jann B

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• I am logged in as administrator. When I try to move the files from drive c to e drive, I get the message that I have currently not authorized to access this file.

  Administrator permissions

  I am logged in as administrator.  When I try to move the files from drive c to e drive, I get the message that I currently don't have permission
  to access this file.

  As an administrator, I though I had permission.  How can I fix it?

  I've only logged on as administrator.

  Even logged on as administrator, you have not all privileges unless you raise them. This is done to prevent malware to take control of your computer when logged in as an administrator.

  What files you try to move?

• Why the temporary files are created?

  Original title: temporary files

  Hi, I searched the Web for a long time to know "why the temporary files are created?"
  what I understand so far is there are temporary files created by MS WINDOWS, and others created by other applications like MS OFFICE APPS? RIGHT?

  - and understand that they are created for purposes of backup in the case of MS OFFICE applications,- and I do not know how? they are created when the App crash or every few minutes or what?

  - and I do not understand why "windows Temp files are created?"

  Show me examples please.

  Thank you

  Hello

  There are many reasons why temporary files may need to be created.

  Windows temporary files
  https://support.Microsoft.com/en-us/KB/92635/

  Wiki - temporary file
  http://en.Wikipedia.org/wiki/Temporary_file

  Wiki - temporary Internet files
  http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• Why my CR2 files appear much darker than jpeg?

  I was wondering why my CR2 files are all of a sudden appear darker than jpeg files in adobe bridge.  It just started happening.  The camera is Canon 60 d.  ACR6.7. this just started happening.

  Vince1973 wrote:

  Only recent photos.

  And yet this it? I begin to suspect the device itself. RAW to JPEG definition perhaps neglected conversion?