Why does it seem different in two docs ID even grayscale image?

Similar Questions

• Why does it seem different from desktop computer laptop iPad from the Office?

  I have a page: learn.opentable.com/getguestcenter.html (how it should look - less video composition)

  I needed to update a video composition, but when checking in catalyst for business, the desktop page looks like offshore on the iPad and I don't know why.

  loctest.BusinessCatalyst.com/getguestcenter.html

  I have not an iPad version separate I'm fine with the Office on an iPad. What is the origin of the images to be pushed over to the left?

  Hello

  It seems that there is some element goes outside of your Muse page, you need to get the White interior.

  I see even the white space to the right as soon as I reduce browser window on my PC.

  

  For more information, please refer to this topic - white in the phone and Tablet border

  Kind regards

  Ankush

• Why does it seem different in chrome, safari and explore my site?

  Hello

  My site looks ok in Firefox, but it looks different in chrome, safari and explore...

  I already tried to clean the cache and delete cookies, what I have to do?

  Thanks for the help!

  Livia

  Hi Livia

  I checked the file and can see that you have used a browser background slide show, the filling of the page is the image of Heroes where thumbnails are disabled.

  If you delete the slide show then the problem is solved as long as the red bar at the top and a white bar at the bottom comes very well with all browsers.

  Please remove the background of the page slide show and use the same image in browser barrier that will correct the problem.

  Thank you

  Sanjit

• I send attachments .jpg to a Mac. Why does the recipient not receive files under .jpgs but as images? How di to fix?

  I have a Mac OS X 10.6. My wife has a Windows computer running Microsoft Outlook Express 6. When I send an e-mail with attached jpeg files, it does not receive them as .jpg files but as images. As far as I know, everything is fine on my end; There is nothing I can do to change the way I place attachments to my e-mails. What can be done at the end to receive the .jpg files correctly?

  OE automatically displays the images attached at the end of the messages.  JPEG files are images.  She can go to file | Save attachments to save the images, but they are displayed automatically when it is attached.

  Steve

• Oficejet Pro 8600 Plus seems to disconnect and docs does not print unless it is turned off then

  I have a Dell with Windows 7 dekstop. The HP Officejet Pro 8600 Plus is connected wireless and worked well during the past year. The only change of note is that an old belkin wireless router died and was replaced by a new Belkin wireless router which seems to work very well. My Office recognizes the printer and my printer recognizes the router on my desktop

  The problem is that it seems my 8600 turns standby or offline after a certain period of time of inactivity and when print jobs are sent to the printer either by OIOS or by different laptops in the House, nothing prints. My desktop printer that actually tell me job is printing... then it says error, printer offline. However, printer is on and says that it has strong wireless internet at any time

  A single difficulty has been to put off the printer (via button on / off) turn it and then turn it back on and saved then print print jobs. In addition, the new print jobs launched fly right by fine. Then the next day, the problem repeats

  I just unplug printer a surge protector and moved to a wall outlet directly by something else that I read. I use kapersky security system causing no problem before the beginning of the question.

  I have disabled the option to turn on printer for some time and stop at another time to remove this as a cause.

  Dell and Belkin two saying its a HP problem since the printing run after the printer out of power, and then power on, but I am running out of ideas to try to stop.

  Bill O'Connor

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  1. define a static in the printer IP address (click here) out of the DHCP of the router Beach (check your manual).

  It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this

  first of all if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off. Or use the printer

  Assistant, printer Home Page (EWS).

  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.

  4. If necessary and you have assigned a static IP address, try using 8.8.8.8 for the preferred DNS server and

  8.8.4.4 at the level of the auxiliary DNS server.

  In the router: (refer to the manual of your router for more information)

  5. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  6 choose the router to 20 Mhz only, or 145Mbps router function.

  7. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  8 disable the WPS and never use it and disable the UPnP for the security of routers. No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  9. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  10 broadcast SSID must be enabled.

  11. save all settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.

  12 turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

• Why a feature of CFLOCK does not seem like a bug?

  
  I searched this forum for discussions about cflock
  and read the livedocs at http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=sharedVars_20.html.
  This reading is above me, thinking that I already knew
  all about using the cflock tag.
  
  Apparently, I'm not a very critical situation
  the appearance of the tag cflock when the scope of the session locking.
  
  My question is about a user, a single session, multiple
  and the simultaneous requests coming to the CF8 server
  the same session of the user.
  
  Sense, a web page that uses ajax, frameworks, pop-ups,
  or the user by pressing ctrl-n-va generate several
  requests to the server CF8 using the same session.
  
  Based on my understanding, using type = "exclusive will."
  effectively single-threaded access to the code between
  the label. So my question is:
  
  
  Why < cflock scope = "session" type = 'exclusive'... >
  single-threaded access to the code between the cflock
  Tag?
  
  
  If you are nice enough to answer, I would really
  explain why the current behavior
  in CF8 is the most correct behavior. If the scope
  past of the session of the application or server, it
  will be infact single-threaded execution access.
  Then why is it not the case when the scope is session?
  
  I came to this problem because I was trying
  to explain to someone the difference between:
  
  < cflock scope = "session" type = 'exclusive'... >
  and
  < cflock scope = "session" type = "readOnly"... >
  
  
  Based on my test simple and what I see, I discovered
  I don't know the difference!
  
  
  I know how to re - write the code to perform exactly
  what I want to do. I can't seem to wrap
  my head around why the cflock tag is implemented
  in this way (in which case the session and exclusivity).
  
  However, it is more likely that I have a bug in my
  simple test... code?
  
  If you are interested, here's the code I used to
  confirm/test my hypothesis:
  
  
  Thanks for reading this post to the end!
  

  Thank you all to consider this topic.

  Unfortunately the answer was because of my bad code.

  Tip and the Azadi persistence paid off.

  The question was NOT because of my tag
  having the REQUIRED 'NAME' attribute

  I have observed the behavior desired by
  just change my new code sample to include
  the name in my tag attribute.

  Thanks again to everyone who gave this post
  in-depth reflection.

  Moreover, in CF5, the name attribute is a required
  attribute. Post CF5 it is optional. After having
  through six different environments with six different
  configurations, I found a CD CF5 and installed.

  After removing the code java-ish, I quickly
  an error message indicating that the name attribute is a required
  attribute... Ouch.

  Perhaps one of the Adobe ColdFusion team
  can make a change that if the validator tag seen
  This line of code...

  the validator tag will throw an error indicating that
  the NAME attribute is missing.

  Maybe I titled this section as:

  Why a cfapplication feature does not seem like a bug?
  When sessionmanagement = true and the name of the attribute is missing

• Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song.

  Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song?

  Maybe the current list of the song has the songs listed in alphabetical order, and you have the iPod nano to play in the order of the list...  How do you think iPod nano to read the list of songs?

• PowerConnect 6200 ACL does not seem to work

  Hello

  I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF.  I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work.  I have tried many combinations to try to get this working, but so far without success.  It's just a simple ACL, which should allow the web/http traffic on the 10.1.30.100 server and blocks everything else.

  The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask 0.0.0.0 it's just all this blocking.  Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly?  I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.

  1. config
  2. int vlan 720
  3. no ip-group vlan720-in in access
  4. output
  5. No list of access-vlan720-en
  6. access-list vlan720-in permit tcp any 10.1.30.100 0.0.0.0 eq 80
  7. int vlan 720
  8. IP access-group vlan720-in in
  9. output
  10. output
  11. copy, run start
  12. There

  Just an update on this issue.  I worked with Dell to determine why the ACL does not seem to work.  We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry.  This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.

  This has been the source of my problems that my traffic is not limited to a single 6200.  I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.

  First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5.  They are both on the same subnet 192.168.5.0/24.  The ACL has a statement of "permit icmp any one" but nothing else.  The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test.  The firewall on both is disabled.

  PC #1 IP: 192.168.5.2/24
  PC #2 IP: 192.168.5.3/24

  [6200]
  |    |
  |    |
  |   [2950T #2] <-->[PC #2]
  |
  |
  [2950T #1] <-->[PC #1]

  In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.

  Dell said that this is normal and if you want communication VLAN VLAN you 'license ip ' to make it work properly.  I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic.  As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets.  So in this case "ip enable any ".

  I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750.  So there is a work around.  I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.

  Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.
  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750/software/release/12.2_25_see/configuration/guide/swacl.html#wp1572522

• What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Original title: files

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  On Tuesday, February 7, 2012 16:28:19 + 0000, RonaldMatte wrote:

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Each file type is in a different format.  The formats are different
  essentially for two reasons:

  1. the files contain any other type of information. For
  example, an mp3 file contains a music and a xls file contains a
  worksheet. The music and spreadsheets are very different things and one
  a unique type of guy would not work for both.

  2. There is also the example of the types of files that are very different, even
  Although basically they both contain the same type of data. For example,.
  a doc file is a file created by Microsoft Word processor (or
  some compatible programs) and a wpd file is a text file
  created by WordPerfect. This is because Word and WordPerfect are two
  very different programs, with very different characteristics. Designers
  and authors of each of the programs designed for a type of file that would be
  works very well with their program.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup

• Why does my HP laserjet 1022 produced a black line on the right side of the page?

  Why does my HP laserjet 1022 produced a black line on the right side of the page? This occurs by using Word 2003, Photoshop, Acrobat etc. I don't get this with my Epson printer. My printer drivers are all to date. OS = Windows 7.

  Hello dqmcg

  Have you checked programs and OS - seemed to be OK, so did a new install of the printer. I have seems to now work OK - IE the files previously printed with lines now don't (only verified although some).

  I think that I was naïve in beliving Windows when he says that the printer and the driver were OK, and when I did a re-driver installation, Windows just used the file I already had. Also the "print test page" printer properties was always OK. Must have been very slight damage to the driver who showed up only with certain types of files of a few (different) programs.

  Thank you very much for getting my brain to work and begin to think logically.

• Why does windows partition hard disk of 500 GB so that 60 GB fills the drive c, then d ' drive is empty (295 GB free)?

  Original title: hard drive partition

  Why does windows partition hard disk of 500 GB so that 60 GB fills the drive c, then d ' drive is empty (295 GB free)?

  It depends entirely on the Installer Windows at your partition layout described no.1 is not standard.

  By default on a totally blank disk Windows 7 installation will create two partitions. A system reservedMB 100 partition which will not have any drive letter and is not normally visible on computer. The rest of the disk will be the operating system.

  Your drive C is 60GB because someone chose her for this size. It seems that if the computer has been upgraded, 60 GB would have been appropriate for Windows XP.

• Default sort of the classic report does not seem to work

  4.2.1

  THM 2

  I have a classic report consisting of an underlying sql with 3 unions. The columns include a party_name (varchar) and two numeric fields.

  for example only select total_cost, cost_to_company, party_name, apex_item.checkbox2(1,party_id)

  (

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  Union

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  Union

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  )

  In our real-world scenario, these three applications are on different tables and different even if some elements are all the same (including the type of data, etc.), where the union

  Because I need activate sorting using the report attributes. I put the tri reporting attributes such as 1 - total_cost desc, 2 - Party_name growing.

  However, when we run the report, if the total_cost for different parts is 0, the sorting should be based on party_name. That does not seem to happen. It still sorts out randomly. I'm wonderingm if it's because there are trade unions and no order of in the query.

  No idea how to solve this problem?

  Nothing to do with unions.

  It looks like it is connected to your thread previous marking dynamically of columns in a "BOLD" for the highest value report. Is it? If so, where are the links generated to conditionally and other HTML elements? They are more likely to cause sorting problems. Instead of posting question after question about one aspect of the problem after another, you get a solution much faster together by creating an example on apex.oracle.com and specifying the complete requirements.

• PS 7 Why does not Adobe RGB files?

  I have an Olympus E-620 DSLR. When I put the color space in the camera into sRGB, after downloading the images, when I click to open in Photoshop 7, the images are correctly identified as sRGB files. When I put in the camera to Adobe RGB color space, Photoshop does not recognize the format. Please see the picture below.

  Question 1: Why does Photoshop not recognize Adobe RGB files?

  Question 2: What can I do to make Photoshop recognizes the Adobe RGB files?

  Question 3: If I assign the Adobe RGB profile in Photoshop to Adobe RGB file unrecognized, that even make any sense? Are 'additional data' Adobe RGB offers compared to sRB there again even if the profile is not recognized in the first place?

  I am very grateful for all the comments and tips!

  

  Assuming these are JPEG images, JPEG format use integrated EXIF metadata to indicate that the files are sRGB. In the EXIF specification, there are only two possible in the metadata, either sRGB or unspecified flags. He doesn't are not of type ICC profiles full files, just tags. When a camera is set to Adobe RGB, it cannot set the Adobe RGB color space in the EXIF metadata. The camera makers have circumvented this limitation is often include underscore in the beginning of the name such as _IMG12345, JPG. Photoshop 7, which is very old, does not understand the importance of underscore in regards to an indication of the different RGB color space. Currently versions do... might be time for an update eh?

  And, as Chris said, you need to avoid warning of profile and assign Adobe RGB images.

• Last update of Safari is more you show your cookies and does not seem to allow you to remove them. Is this a decision of Apple?

  Last Safari doesn't show cookies and does not seem to allow their removal. Why?

  Data of Safari/Preferences/Privacy / website management.

  

• Why does take hours to receive the iMessages?

  Why does take hours for the texts assigned iMessage?

  Hello

  While appearing more precisely this question is in fact not.

  There could be hundreds of reasons why they seem to be delayed.

  Some info on when they are sent, how do you know that they have been sent, if you compare it to another device would be useful.

  

  19:49 Monday; June 13, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)