Why does my HP laserjet 1022 produced a black line on the right side of the page?

Similar Questions

• WHY DOES LR SEND FILES TO PSCC2015 WITH EDIT INCLUDED IN THE NAME, AS STATED IN YOUR LITERATURE THAT IT SHOULD?

  WHY DOES LR SEND FILES TO PSCC2015 WITH EDIT INCLUDED IN THE NAME, AS STATED IN YOUR LITERATURE THAT IT SHOULD?

  Sylvie at Photoshop General Discussion

• Why does take more than 20 hours to run MSE from the upgrade from Vista to Windows 7

  I've upgraded to Windows 7 a couple of days.  Normally, I run a full scan of MSE once a week at night while I'm SLEEPING.  Since upgrading to Windows 7; MSE 5% complete the next morning.  I don't know why it happened - please let me how to fix it.

  I suspect that the problem is that your computer came into fashion "sleep" during execution of MSE.  There are a number of discussions related to that on this forum as the following: http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/why-doesn option is to change your power settings to prevent the "sleep mode", and then change them back.  What I do is run a small program called insomnia which remains visible on the screen, so I remember to turn off once the scan is complete: http://insomnia.en.softonic.com/

• Why my C410a printer all in one is leaving a black line in the middle of a scanned page?

  I use Windows 7 with my C410a all-in-one printer... and this line does appear when I print the page... it does not appear on the recorded image.

  Hello richalter.

  Please check this document.

  http://support.HP.com/us-en/document/c01622189

  Bravo!

• Windows 7 does not load, is sitting on a black screen with the mouse arrow.

  I loaded several times and even used the repair option still does not load past this screen.  Looks like it should be on the page of actual windows, but nothing.  Have to restart the computer at this point.  He will continue to try to reinstall windows 7... cannot use same cause recovery F10 it says something about a partition... I have no computer!  What is going on???

  Hi all

  Thanks for posting. If I understand your messages is correctly appears that your facility will not start even to load. If this is the case, then you probably bad media. I would either re - burn your DVDs at a slower speed. If you got your DVD with a company I contact the seller and request additional media.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why does start printer print before I select "print preview or the selection?

  Recently purchased HP Officejet 4500 all-in-One. Installation is easy and fast, but when I click on the printer, the symbol "printer" automatically starts to print before I can choose "preview before printing or page. Must hit "Cancel" buton until the third test. Then, it will offer "print preview." How can I stop automatic printing?

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  If the update of drivers does not resolve the problem contact the seller and the support of HP warranty service.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 - select the version of your printer - and then select your version of Windows
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why does it seem different from desktop computer laptop iPad from the Office?

  I have a page: learn.opentable.com/getguestcenter.html (how it should look - less video composition)

  I needed to update a video composition, but when checking in catalyst for business, the desktop page looks like offshore on the iPad and I don't know why.

  loctest.BusinessCatalyst.com/getguestcenter.html

  I have not an iPad version separate I'm fine with the Office on an iPad. What is the origin of the images to be pushed over to the left?

  Hello

  It seems that there is some element goes outside of your Muse page, you need to get the White interior.

  I see even the white space to the right as soon as I reduce browser window on my PC.

  

  For more information, please refer to this topic - white in the phone and Tablet border

  Kind regards

  Ankush

• Why does my merged project display 2 table of contents for the first project/start?

  I use RH8 and windows 7 and generate Webhelp

  When I generate my merged project I get 2 table of contents of the first project. When I click on other merged projects disappears from the table of contents 2^nd and all is well.

  Also, I can't return to my first / start window.

  Here is what I created:

  Main folder

  Parent

  Children

  Project 1 (this is my start/welcome page)

  Project 2

  Project 3

  Project 4

  My Parent file in the table of contents contains new projects and looks like this:

  Project 1

  Project 2

  Project 3

  Project 4

  The only section in the parent file is empty and I put in the following redirection according to the instructions on the site grainge:

  "< meta http-equiv ="refresh"content="0;url=./mergedprojects/project1/project1.htm "/ >

  How stop the TOC 2 on the first page of the project start and how do I display so I can access it later.

  Any help is appreciated.

  Pat

  The start page is not a topic. This is what opens the three components and the topic you see in that is the default theme.

  By default, HR takes the name of your project and which initially applies the page so if your project is called redrabbit, the start page will be redrabbit.htm.

  Many authors can call the redrabbit of the theme by default as it is the name of the project and it seems logical.

  Problem is when the wizard attempts to use it as the default value for the start page, the name is used for the number 1 is added.

  This means that you end up with redrabbit and redrabbit1. If you look in the wizard, you will see the name of the start page, first on the ground. You do not redirect, that redirect you to the default topic that is longer than down in the page of the wizard. The index is that the field is called the default theme.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• M177fw MFP: Color Laserjet MFP M177fw Pro do not leave the page logo star HP &amp; energy and go to the home page

  I have a HP Color Laserjet Pro M177fw MFP multifunction printer.  When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up.  My MacBook Pro will see the printer (I'm wired to it via a USB cable) and it will start to print, but crashes at halfway trhrough sending data from the computer to the printer.  Is there a way to reset the printer to its default settings (first anniversary)?

  Hi Audiomic,

  I can provide some measures that could help solve the problem.

  1. try to reset the printer. Powered on, unplug the power cord from the back of the printer, then wait 60 seconds. Reconnect the power cord to the printer and turn it back on the power. Wait for the printer to initialize.

  2. If the problem persists, try to download and install the latest version of the software package. The most recent update is 20160525.  You can find the update here. Click Download and follow the instructions to install the update via the USB port.

  3. If the update does not work, I recommend this HP forum thread going and asking that the support agent send you instructions to perform a NVRAM reset.

  This last step is the only way I know to do a factory reset if the screen is frozen.

• Why I can not install a trial of InDesign CC? The page says download but is not true! It's so frustrating!

  Please, do know why it is impossible to install a trial version of InDesign CC

  Hi maricusa,

  It seems a problem with the browser.

  Can you please check with another browser and see if you experience the same.

  Kind regards

  Rave

• I can't say what site it is because it does not give full name, just a few letters on the page saved password.

  help please

  Hi smartyclown, you can change the size of this Panel to show more content by dragging the lower right password manager...

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• Want 7640 does not print color, but is printed in color on the Page of Test of Google Cloud Print

  I can't print the colors in a print job from the Web via Google Cloud Print / ePrint.   It prints in black and white.

  However, if I print a test page for Google Cloud Print, it prints in color.  I can also print a color copy.  My ink cartridges are filled.  When printing using chromium, the color preference is set to 'color '.  Everything works as expected.  The printer is capable of printing black & white jobs from across the internet.  The device is on.  Paper is in the tray.  The plateau is in the printer.  There is no jam.  I am trying to print source documents have color in them.  I am completely seen, and would be able to see the color in printed documents, if it existed.  Forgive my recitation of what is obvious, but I just spent several hours on a hotline explaining and reexplaining that my test print from the Web, color print.

  My environment is printer Envy 7640 and HP 11 Chromebook

  HERE IS WHERE THE CAUSE MAY BE:

  When I visit the page of Google Cloud Print to http://www.google.com/cloudprint/learn/ , I am able to click on "Try It Now" to find my printer, select 'Grey_CMY' color 'Color', click 'Print' to generate a single color test page.  However, I can't find any way to save the preference of color by default, and when I go back to the Google Cloud Print Try It Now page, color is set back to "Grey_CMY".  So even if I'm selected in the print dialog box color Chrome , it may get deleted by default in Google Clout black and white printing.

  Any help is appreciated!

  OK, here's the resolotion: when printing the dialog box, there is the link at the bottom of the dialog box "Print using the Google Cloud Print dialog box.  From there, the PAG printers are displayed by default of Grey_CMY can be substituted for the color and the job will be printed in color.

  So, I can't change the default, but I can ignore it, which is fine with me - I just need to know can I print in color.

• Color LaserJet CP1525nw: 1 1/2 black lines on the right side and another black spot on the side right laserjet cp1525nw color

  I downloaded the software and latest drivers. It has the latest firmware. I contracted the toner and blown with compressed air. Look in the back for the dust from toner on the sleeve of teflon to fuser. Unplugged, restarted, of course my book has been for laser printers. Ran across several cleaning cycles, recalibrated color, put a piece of paper and toner open door when he was printing. Released A black to see if I could see and toner on blue cylinder. None of the things I've tried have solved the problem. Toner is about 3/4 down. It print fine with this new series of cartridges for quite a while.  I went from my warrarnty.

  .

  The amount of toner from the printer say that there is only an estimate. Your default seems to me that the black toner cartridge is bad. First thing I would do is to replace the black toner cartridge as it should solve your problem.