Why does the HARD drive only shows 69.8 Gb on my G20-139?

Similar Questions

• My computer does not detect the hard drive or show

  Hey Microsoft,

  So, I have a Windows Vista laptop and earlier this year, my computer suddenly won't detect or display my CD player. And when I go to disk management, there is no assignment of letter or anything, just an empty space. Please help me! Thank you!

  -Maryse

  Hello

  1. you are using an external CD/DVD-Rom?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below t help solve the problem.
   
  Method 1
   
  Run only the automated fix this program from the article mentioned below.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
   
  http://support.Microsoft.com/kb/314060
   
  Method 2
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  I hope this helps.

• 3TO hard drive only show 746 GB Dimension 9200

  I have a Dell Dimension 9200, operating under Windows 7 64-bit. I just installed a Toshiba 3 to drive, but Windows sees only 746GB. I can't find the Intel drivers for the chipset to be updated.

  Can anyone help?

  Thank you.

  Hi RattyCathy,

  If your chipset does not support the Intel RST, then the solution is to use a SATA controller card. But I would like to visit the Intel site and check that first.

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Toshiba USB external hard drive 250GB shows only the red light - sound of rattling

  My USB HD external drive to Toshiba aged 16 months stopped working yesterday. It shows just a flashing red light
  and makes a slight clicking noise. Of course, we cannot guarantee any more. But all my backups are on this drive,
  This means almost 10 years of work destroyed if I cannot access this disc more. Someone knows what to do to fix
  This problem?

  Post edited by: admin

  I put t know what the flashing red LED could mean, but it looks like a HARD disk head crash. Perhaps you could find some details in the user manual that the flashing light means.

  However, he still stupid s cases of dysfunction of a backup media situation. I had a similar problem with my 2.5 100 GB USB HDD. After about 3 years of work, the HARD drive died and I was not able to access the HARD disk. I was a lucky man because I have backup my data also on the DVD so I was able to restore the files and data.

  What to say maybe s possible to save data, but professional help would be necessary. Maybe you should contact technicians for assistance.

  Best regards and good luck buddy

• Why external hard drive shows as 'volume' below the hard drive files? LR5 | 10.10.1 Yosemite

  Why is there a new folder, i.e. by car Ext., why is - a new folder, either drive Ext., no projection in LR5? New folder appears as 'volume' below the files from the hard drive. Is this something new on Maverik10.10.1? Worked normally in Maverick. LR5 display? New folder appears as 'volume' below the files from the hard drive. Is this something new on Maverik10.10.1? Worked normally in Maverick.

  Whoa hold on.

  So I went back and put a picture in the folder

  Then, when the library of LR model came with the disk in it, now

  I was given an option to add to my catalog and the button import was direct.

  Clicked on it AND the drive with the green bar and folder to archive appeared

  as they should have.

  I think it's done. Back in business. Now I can copy on my k 32 photos.

  Thank you very much!

  Neal

  Wednesday, January 14, 2015 15:22, Neal Weinberg [email protected]>

• Toshiba 40L3453DB does not recognize the hard drive Seagate Wireless Plus

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  Originally posted by Y44KCM
  

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  There are known limitations when connecting TVs USB hard drives:
  -HDD format is one of them: FAT/FAT32 should work, NFTS (depending on model) probably not
  -in the manual for this model, only the USB keys are hard disks mentioned, none (which require an external power supply).
  USB drives are USB - bus-powered and therefore does not usually cause trouble, while external power supply used by hard drives can lead to problems, this device is not recognized.

  In short: there is not that you can do, in addition to changing the USB device. You can try with the FAT32 format first, but with some probability that also won't work, except for the fact that FAT32 is supported only up to a certain size of drive.

• Why is it hard drive see the photos, films and music even after I deleted all

  Hello

  I recently deleted all my photos, movies and music on my Mac to save on hard drive.

  However, despite the removal of all my hard drive is showing:

  3.2 GB movies

  1.3 GB Audio

  Photos of 4.3 GB

  I searched these files and the results come back with nothing but my hard drive is still showing that this space is taken to the top.

  Does anyone have any ideas or ideas?

  Thank you

  Andrew

  Hard drive space and 'other ':

  https://support.Apple.com/en-GB/HT202867

  Also, try to rebuild the Spotlight index: https://support.apple.com/en-us/HT201716

• Satellite C660: HARD drive space shows only 20 GB of free?

  Toshiba Satellite c660 with 320 GB of disk space, it shows that 2 hard drives or 2 partitions, one called data shows only 20.6 GB of free on 148, but when I go in there I can only find at maximum approximately 50 GB even with all the backups?

  Hello

  There are more partitions on the HARD drive.
  You can see it in disk management.
  Right click on computer and select manage.
  Now you should be able to go to the disk management which will show you all the available partitions.

  A hidden partition is used for the Windows 7 backup files that are needed to fix the Windows 7 in the case where something goes wrong with the OS.
  Then, you can find a Windows partition and the other partition is used for HARD drive recovery. The point is that you are able to run the system recovery from the HARD drive without the use of the recovery disc (recover disk must be created using the recovery disc creator)

• Satellite M200 Vista shows that the HARD drive is full of 98%

  This problem showed about 2 months ago the system started running slowly and after a bit of research, I went to computer and found he showed that the HARD drive was full of 98%. Then I went and disabled the feature of shadow copy that reached about 3 Gig. After that, the performance was still hurt, so I decided to do a system restore. All reformatted once was good again until a week ago, and the same problem came back once again.

  This laptop is running Vista Home Premium SP1, 120 Gig drive HARD, Kaspersky Anti-virus, it has very limited connection to the Net, as it is mainly used to store and transfer music on an Ipod (20 GB of music).

  Any thoughts? Maybe a hardware failure?

  Thanks in advance.

  Craig.

  Hardware failure is very likely, since you are clearly able to access your hard disk without problem.
  Looks like you are using software that could be gradually fill the hard drive with data, such as a log file, it is difficult to say.
  With the erosion of the space, you might want to periodically check each folder in drive C (right click, properties) and see how it changes for each new session.

  Also clean the temporary files would help such as for:

  "c:\temp".
  "c:\windows\temp".
  "%userprofile%\Local Settings\Temp.
  erase internet files of Internet Explorer cache / temporary
  deactivation and reactivation then "System Restore" (do this only if you are satisfied with Vista is running stable)

  Richard S.

• Portege M400 does not accept the hard drive built into the boot password

  First I assigned a 9 character long password BIOS via the security utility help my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
  He asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long password of HDD, and I said ok.
  Then, I removed the BIOS password. But couln can't remove HARD drive password.

  I then created a different password which has been long 1 character and removed, but the HARD drive password remained.
  When I rebooted the system, he asked me the 'HARD Word built-in disk '.
  I tried to enter both the 9 and 1 character long passwords, but it says not 'certified '. What should I do?

  Should I write tha password over and over again, until it reaches 22 or more characters?
  If this is the problem, then, the number of characters long?
  I also think that the keyboard layout mapping can be a problem.

  I have never changed the setting page, but maybe that the default value of the plant is different from a windows.
  But I used only numbers and letters of international standard.

  I need immediate assistance.
  All my work is interrupted.

  I put t know if you have inserted the right HARD drive password or not but the non-certified message said that the inserted password is certainly not correct.
  Someone said that the message uncertified might if poster if you laptop was send hibernation instead of the stop mode mode after the password has been set.

  But I don t think that this could be relevant in your case.

  One question; have you tried to delete the password for HARD drive via the password of Toshiba or in the BIOS utility?

  Please check if you can edit/delete in the BIOS because I found the info in the manual M400 you must use the BIOS Setup to modify, delete the disk HARD ot password to set the password master HD!

  The manual also provide information if you forget the user Toshiba HARD drive password will not be able to help you and your HARD drive will be rendered completely and permanently unusable! When save the HARD drive password stop or restart the computer. If the computer is not shut down or restarted, the recorded data (password) cannot be correctly included!

  So maybe that's a reason why you can not change the HDD password?  :|

  Greetings

• Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

  Hello.

  I have a Qosmio F30-112.
  I tried to install the Windows XP Professional instead of the Media Center edition.
  However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

  I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
  But when I try to install XP Professional it always gives me the same error.

  Suggestions for the configuration of the BIOS or solutions for why this is happening?

  Thanks in advance.

  Hello

  Just a question:
  You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

  The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

  You should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  and should also search this forum for other threads

  Good bye

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• NSLU2 does not recognize the hard drive

  Hello

  I have a NSLU2 on Win XP SP3.

  It does not recognize the USB drives, he wrote that 'drive not formatted '. It only recognizes the USB key as "disk2".

  Current firmware is V2.3R29.

  When I try to update the firmware, the "not enough disk space" message.

  I tried the same disc on a different NSLU2 and it worked fine.

  What can I do my NSLU2 reading displays the disc correctly?

  Thank you very much for your help!

  Markus

  It seems to be a firmware issue... The V2.3R29 firmware. is quite old. The latest firmware is Ver.2.3R63... Hard reset the NSLU2, power cycle it and then try to update the firmware. After upgrading the firmware, reset it again and reconfigure... Disconnect the HARD drive before upgrading.