Portege M400 does not accept the hard drive built into the boot password

First I assigned a 9 character long password BIOS via the security utility help my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
He asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long password of HDD, and I said ok.
Then, I removed the BIOS password. But couln can't remove HARD drive password.

I then created a different password which has been long 1 character and removed, but the HARD drive password remained.
When I rebooted the system, he asked me the 'HARD Word built-in disk '.
I tried to enter both the 9 and 1 character long passwords, but it says not 'certified '. What should I do?

Should I write tha password over and over again, until it reaches 22 or more characters?
If this is the problem, then, the number of characters long?
I also think that the keyboard layout mapping can be a problem.

I have never changed the setting page, but maybe that the default value of the plant is different from a windows.
But I used only numbers and letters of international standard.

I need immediate assistance.
All my work is interrupted.

I put t know if you have inserted the right HARD drive password or not but the non-certified message said that the inserted password is certainly not correct.
Someone said that the message uncertified might if poster if you laptop was send hibernation instead of the stop mode mode after the password has been set.

But I don t think that this could be relevant in your case.

One question; have you tried to delete the password for HARD drive via the password of Toshiba or in the BIOS utility?

Please check if you can edit/delete in the BIOS because I found the info in the manual M400 you must use the BIOS Setup to modify, delete the disk HARD ot password to set the password master HD!

The manual also provide information if you forget the user Toshiba HARD drive password will not be able to help you and your HARD drive will be rendered completely and permanently unusable! When save the HARD drive password stop or restart the computer. If the computer is not shut down or restarted, the recorded data (password) cannot be correctly included!

So maybe that's a reason why you can not change the HDD password?  :|

Greetings

Tags: Toshiba

Similar Questions

  • Satellite P100-347 does not accept the BIOS password - it appears: invalid password

    Hello!

    I have a Toshiba P100 - 347. And yesterday I entered the password and now when I turn on the computer, it does not accept. It seems Setup information: password invalid.
    It's just after turn on, appears after the Toshiba logo.

    Can someone help me?

    Hello

    You used everything simply a bad BIOS password. Either you made, mixed with a few letters or for example buttons caps lock has been activated.
    Please check these possibilities.

    By the way; It of not possible to bypass the BIOS password unknown by yourself.
    If the BIOS password into the unknown, you will need to contact the ASP in your country to unlock the computer and remove the BIOS password.

  • iPad does not accept the new password for the new internet provider

    Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?

    Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password

  • System does not accept the administrator password when you want to delete file system

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I downloaded bandoo and Yahoo since then I had nothing else problems. It's not my computer that I use, but I don't have the permission from the owners to use this computer. I have no problem signing into my account, it is impossible to connect and it does not recognize its administrator password to remove these items from the computer. I tried all that I know (which isn't much). Please please help me!    Also, I think that's why I can't return and before restore point I made this big mistake.

    Janice50

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 does not accept the connection password.

    Original title: Windows 7 Professional login password not to take.

    I insert the correct password but incorrect password error. Please solve this urgent problem.

    Vishal Giri

    Here you go:

    1. Set your BIOS so that it uses the DVD drive as its primary boot device.
    2. Start the computer with your Windows 7 repair CD.
    3. Press a key when prompted to boot from the DVD.
    4. Select 'PC Repair' in the menu.
    5. Select 'Repair' when prompted.
    6. When you are prompted, select System Restore.
    7. Configure Windows to a point when your password has always worked.
    8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  • acct user does not accept the administrator password

    I put user accounts when I try to make aplications, I am asked to use the administrator password, but it wont open indicating that this is the wrong password

    Hi assia,.

    You should check your setup of the keybord layout so it has not changed mapping.
    One thing is to write the password in a notebook to see that it is correct.

    There is no universal way to reset the administrator password.

    Kind regards

    Joel

  • System preferences do not accept the admin password

    System preferences panel does not accept the administrator password

    The Prefs system is just an application. Exactly where you try to use the admin password? What is the error you get? Are you sure that the password is correct?

  • My mac does not detect my hard drive after the upgrade. How to solve this problem?

    My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

    Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

    To post a screenshot

    1. Press command + shift + 4, that will change the cursor to the line of sight.
    2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
    3. Release the mouse button and the image will be saved on your desktop.
    4. Click on the camera icon in the toolbar of the message forum Editor.
    5. Drag the image on the button select a file and click the Insert button.

  • the Windows xp Setup program does not detect my hard drive

    When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

    SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

    "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
      <>http://support.Microsoft.com/kb/314859 >

    Several means have been formulated to work around needing a floppy disk.  You can view the following items:

    'Install Windovs XP on SATA without floppy (F6)'
      <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

    "Install Windows XP on a SATA hard drive"
      <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

    HTH,
    JW

  • the new Win7 disc replacement does not accept the case key

    Our dv6 - 2173cl end is more the boot, the "freeze" while showing the wallpaper with the taskbar 'framework' as well as the Start button, the HP logo button and the Date/time.  Defective hard drives the check HP tools with 90772-50e656-xd0021(7? wrote down in a bit of a hurry, sorry)-6ou103 error code.  Since the reader would also not 'take' the restoration attepmts (so the HP tools) we thought that a new disc has been a given.  Fast forward...  Now with the new drive in and a new Win7 install (no recovery disk, yes we know) the facility does not accept the key from the sticker on the bottom of the case and Yes Win7 is Home Premium on old and new.  So now, what do we do to get active Windows?

    I found that if you enter the key during installation and enter the key during activation of this always accepts it. Always works for me when I do a clean install of Windows 7 on client computers.

  • Re: Failed on nine L510 Vista admin password - does not accept the admin pass

    Hi all

    Completely baffled by this one so would appreciate any advice.

    I just bought a new Satellite L510 with vista hard disk installation.

    I went through the installation process long and eventually got to the point where I could configure my admin account and the name of my computer.

    I chose the name of my admin account and typed in the password and confirm the password and named my computer.

    Now when I get to the initial Vista logon screen, it does not accept the password I am entered (and confirmed).

    This can be a problem with caps lock, as the password was all numbers.

    (the password was all numbers and five numbers)

    It, however, gives the correct indication for the password that I entered. It does not accept the password.

    I would be happy even just redo the installation process, but I have no idea how to do this, because I can't even a quick command-line anywhere.

    Help, please!

    It's strange. You can log on using a different user name?

    In any case to run recovery, you either:

    * Press and hold zero during the power upward
    * Press F8 before Windows starts to enter the Windows Start Menu, then run recovery of the option "repair your computer". http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  • Error in partition Acer Iconia B1 does not accept the update.

    My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

    ERROR:-invalid partition setting
    17: 238e8000:888e8000 of fat
    Instalation aborted.

    The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
    Can you help me?

    A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

    Download the patch

    Iconia B1 - A71, install the USB 2.0 driver - video tutorial

    Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

    Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

  • Windows media player does not recognize my hard drive

    Windows media player

    Why Windows media player does not recognize my hard drive

    Hello

    1 are there any changes or updates made on the computer?

    2. do you get an error message? If Yes, what is the full and exact error message?

    I suggest to see the links and check if it helps:

    The problems of the CDs or DVDs

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

  • Windows 7 Starter Edition does not recognize a hard drive WD

    Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

    Thanks for the reply.

    There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

    I managed to fix the problem after:

    -J' scanned the computer (DELL Inspiron) with the Safety Scanner
    -J' completely uninstalled all the software associated with an external hard drive
    -J' uninstalled the USB controllers
    -reboot the system
    -reconnected the external HD
    -After gaining access to the drive, I installed the dedicated software

    Best regards

  • Remote device does not accept the connection since W7 re - install.

    Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

    Just cannot map a network drive!

    Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

    Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

    When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

    The remote device or resource does not accept the connection
    The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

    any help would be greatly appreciated.
    Thanks in advance.

    Hi Stuart,

    The question you posted would be better suited to the TechNet community. See the link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this information helps.

Maybe you are looking for