Why downloads automatically erases their story directly after that it finished downloading?

Similar Questions

• Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with wireless capabilities does not not after stopping.

  Method 1: run the troubleshooter and check if it works.

  Using the troubleshooter from network in Windows 7

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

  Meet us if you experience problems with the wireless connection or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• My tx10 automatically rotates pictures 90 degrees after that I'll take them. How to make this stop?

  My tx10 automatically rotates pictures 90 degrees after that I'll take them. How to make this stop?

  The camera automatically rotates the image according to its orientation. Unfortunately, this feature cannot be disabled.

  You can correct orientation by setting the [rotation] option in the menu viewing.

  If my post answered your question, please mark it as "accept as a Solution.

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• Why DB read file is still active after that the session was killed?

  Hello
  
  I have a query which is only select read only (no selection for update) on a big enough table (lines 500millions). The result must return a few million rows (1-10 million), because it is not properly written.
  
  I killed all the sessions opened by the user who started the application, but after 3 hours, it is still ongoing.
  
  I don't understand. It's a read. There is no data restoration that must be set aside, there is no generation of redo (low) because of this.
  There are a few kinds made in this query.
  
  So, why after that I'm killing a query that is read-only, the process runs for a very long time?
  
  It is not the first time I'm facing this problem.
  
  Any ideas?
  
  Thank you
  Daniel

  >
  I killed all the sessions opened by the user who started the application, but after 3 hours, it is still ongoing.
  >
  Have Yes - but you used the IMMEDIATE clause to kill HER?
  >
  IMMEDIATE specify IMMEDIATE load the Oracle database to ongoing transactions, releases all session locks, recover session state full and immediately returns control to you.
  >
  If you really want the process completed rather than simply "marked" termination then use DISCONNECT SESSION with the IMMEDIATE clause

  See the "Clause of DISCONNECT SESSION" in the doc of the SQL language
  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_2013.htm
  >
  Use the DISCONNECT SESSION clause to disconnect the current session to destroy the dedicated server process (or virtual circuit if the connection was made through a shared server).
  . . .
  The IMMEDIATE environment disconnects the session and retrieves the status of entire session immediately, without waiting for open transactions to complete.
  >
  View the results of the use of DISCONNECTION

• Why my mousepad of envy going crazy after that, I was online for a while?

  Why my laptop running Windows 8.1 envy TouchSmart seems to have a mouse who becomes crazy after a few minutes online?  Block Web sites and they can only be closed with the Task Manager; get ahead start requires 10 trials, because it keeps flipping from the desktop to the "pretty 8.1 tiles; jumps of magnification of the screen so small I can't read so great, I can't read, and so on.

  I know it sounds like The Madwoman of Information Technology, but this could be due to a virus/malware thing where someone got into my system and has kind of a "flag and funnel" system that sends an alert when I log off?  I just had to put down a computer that had what was called a 'persistent' pest that cannot be removed with conventional methods of nuke-and-burn.   (Not the partition recovery, but DBAN and other).

  I just had this happen two times this morning, and both times she was corrected by unplugging and restarting my router.

  Is there a way I can just install Windows 7 on a different partition?  Is there another way I can solve this problem more effectively by disconnect and reconnect to the network?  Is - this somehow related to the previous post from this morning, 'Why HP Recovery Manager starts by Rebecca.exe?'

  Thanks to all who responded here.

  Hey ElizaDoolittle8,

  Thanks for the test for me.

  When you say better that you mean that the problem does not occur with the mouse, or less often?

  If this always happens with a mouse looking for problem software or Windows. If this does not happen with a mouse, looking at a hardware or driver problem.

  You can try to reinstall drivers touchpad with the following link to troubleshoot driver: Driver of the Synaptics TouchPad.

  If this is a new issue and it was working properly before you can also try a system restore. What result would be no Windows, updates driver updates or installs software that may cause the problem. It will not affect your personal files. You can see how to do this here: How to refresh, reset, or restore your PC.

  Let me know if it helps.

• How to restore all windows with their respective tabs after that Firefox has crashed?

  A few separate windows have been opened with several tabs open in each separate window. Losing these well organized data sets was paralyzing, but I hope that it will be possible to restore all sessions.

  Try the 'Story' menu > 'restore previous session '.

• Do you know how to solve the reason why I can't export my file into a MP3 file successfully? Why the MP3 file will not play after that I exported?

  Do you know why a file I exported using Adobe Audition doesn't play like a MP3 player?

  Well, to give a detailed response, we will have to a lot more on exactly how you did your export MP3 and where it will not play.

  However, a quick generic conjecture is that the hearing can make MP3 bit rate Constant (CBR) and bit rate Variable (VBR), as well as a wide range of bit rates.  (All of this is implemented on the screen POPS when you save in MP3 format).  Some MP3 players get picky with the files VBR and others do not like the low rate files then you better check these settings on your export.

• Why does my project AE seem distorted after that that he will appear?

  I just finished my AE project, then when I made the circle is now an exaggerated oval. It is stretched horizontally. What is my settings? It's never happened before.

  > 'It seems as if the rocker is pressed then it would be the wrong setting rather than the reverse.'

  The default is to have each of the pixels on the screen of your computer (square) corresponds to a pixel in your publication. With active switch, a scaling operation happens. This compensates for how a certain type of video monitor would show these pixels.

  But, even once, is that for more rare uses of the non square pixels.

  You say that you assign to your composition of non square pixels... but you did by choosing HDV composition settings preset. HDV is not a format that is relevant to the work of many people these days. Do not place your publication to this standard unless you have a good reason to do so.

  You can correct these sorts of errors after the fact by changing the composition settings, resizing in the output module or scaling of the composition to compensate for squash that you introduced.

  Please, do not go through the basics:

  http://Adobe.LY/AE_basics

• Why my emails reappear in my box after that I delete them

  When I delete messages in my Inbox, they reappear as soon as I check my mail and up to 2 or 3 times. Eventually, they stop.

  is the IMAP or POP account?

• Why the menu bookmarks will remain sorted after that you sort and close the page?

  Newly added Favorites go to the bottom of the list. The page will sort from A to Z when we click on the sort icon... When you leave the page to sort and go back in the newly added bookmarks back not sorted to the bottom of the page.

  See also:

  • http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
  • https://support.Mozilla.org/KB/sorting+bookmarks

  Via the menu displays in the library to sort only shows bookmarks in the chosen sort order and constantly changing them (from where the name of views of this menu).
  
  By clicking on the header did the same thing.
  
  If you want to sort the bookmarks then you must right-click on a folder and use "Sort by name" to sort this issue.
  You cannot sort the individual bookmarks, only one folder can be sorted like this.

• Why does the Movie Maker keep blocking after that I added an effect to a video clip

  When I try to put an effect to a video clip in MM It will continue to give me a nees MM close Message

  Hello

  In dealing with the problem with Windows Live Movie Maker, I recommend you post your question in Windows Live Solution Center for assistance:

  http://www.windowslivehelp.com/

  b Eddie

• Why microsoft cannot fix their Web site so that people can find answers to their question instead of had instructed to responses on windows 7?

  I think my question speaks for itself.  I don't need answers on windows 7 so quit trying to sell all his chances.  I am looking for information on computer remotely with windows xp and all I get are answers to problems with windows 7.  I want to access a remote computer that has Linux on it. Everyone you have all the answers?

  Hello

  Because your computer is the computer that will control another computer, your computer is the client and the other computer is the host.

  The customer must already be on your computer.

  Otherwise, this might help, http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteclient.mspx

  I don't know if your version of Linux can accept remote Win XP RTD.

  To configure the side LInux check (if possible) in the support forum for your version of Linux.

  This program of remote control using by many is usually purpose-built UltraVNC.

  It has versions for Windows and Linux, and both versions can communicate.

  http://www.UVNC.com/index.html

• Slide does not advance after that video finishes playing

  Hi everyone, I'm having a problem getting my slides to advance to the next when slide the flv/f4v files I inserted are completed play. I slide off the value: go to the next slide and I have also increased my slide duration to be as long as the video. I tried to look at this problem on lynda.com, but the only option I found was creating continue a button for the user to click that will advance to the next slide, after the end of the video, but I don't want to have to do what is the button continue my only option or is it a setting in the properties panel I'm somehow missing? Help!

  If you don't want a bar of playback on the video, why not insert video slide? It is not a bar to reading, begins to play immediately and after playing past to the next slide.

  Lilybiri

• screen has black and white lines after that video finished playing age of empires II

  Age of empires II graphics glitch

  age of empires II and the expansion do not work on my HP Pavilion Dv6 laptop.

  When I open the game, the start videos displays fine, but after I finished I just get a screen with black and white lines horizontal and playing music on the menu

  I'm using windows 7 Home premium 64-bit

  Have you tried to reinstall the game? Also, try to run the Setup program by using the above compatibility settings (ask if you need help with this).

  Rifdhan