Why Dreamweaver CS6 invite me to enter information on the subversion server?

Similar Questions

• Why dreamweaver CS6 code Air mode so non-Union?

  Why dreamweaver CS6 code Air so non-Union? When pasting of an editing program such as Notepad code the code is a mess.

  Also why the cursor jumps around another section of the code display page when changes are made in split view?

  Use the commands > apply Source format.  This formats your code as you have defined it in the preferences > Code formatting.

  Nancy O.

• Mobile folder Dreamweaver CS6 to new computer includes information of site?

  My Windows 7 PC had a Raid crash, so I had to buy a new PC in Windows 8. I put one of my old PC hard drives in an external hcase ard disk and now I can access all the folders and files from the old PC.

  
  

  After installing Dreamweaver CS6 on my new PC, I closed Dreamweaver and I replaced the folder Dreamweaver CS6 \Users\ < username > \AppData\Roaming\Adobe with my old PC. When I started Dreamweaver, he looked at how I had it in place on my old computer. Good news!

  
  

  The bad news is that when I click on Site and Manage the Sitesopen, my web site is not listed. That must mean that the info for my site does not have to be located in the folder Dreamweaver CS6 .

  
  

  Does anyone know what I need to go to my new computer so my website is listed under Manage the Sites? I just want to move a folder or a file instead of looking for FTP information and all this incoming again.

  
  

  Remember, I can't run Dreamweaver on the old PC, so that this information is useless:
  

  
  

  How to move your Dreamweaver files to a new computer (thesitewizard.com)

  How to move Dreamweaver to a new computer | eHow

  I need to know which file or files to move and where they are.

  Thank you.

  After having poking around for awhile, I found a useful Yahoo page that told me what to do, so now I can download stuff on my website again.

  Thank you for trying to help two.

• Why Dreamweaver CS6 responsive web site publishes not too sensitive?

  Hi, this is Mary.

  I'm a NEWBIE at this.

  I just finished (or so I thought) create my first website. It was created using

  "layouts fluid grid ' with Dreamweaver CS6 and HTML5. I took many tutorials online.

  I've created this site SPECIFICALLY to find the good in the sight of smartphone (480px and less).

  The site is 6 pages in total.

  All display in browsers perfectly - they look correct to the office, laptop and smartphone views.

  All have been approved by the w3.org for validation.

  However, now that I launched the site with my hosting company, the 'look' that I get on the

  Smartphone is what you see on the desktop of the shrivelled restraint - as if none of the gridcontainer

  settings are recognized.

  The domain name is www.marcogliesemarketing.com

  

  Here is the code for the container of the grid:

  @charset "UTF-8";

  / * Simple fluids

  Note: Fluid requires that you remove the attributes height and width of the media of the HTML

  http://www.alistapart.com/articles/fluid-images/

  */

  IMG, object, embed, {video

  Max-width: 100%;

  }

  / * IE 6 doesn't support max-width so 100% width by default * /.

  . IE6 img {}

  Width: 100%;

  }

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: 5;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 9;

  DW-gutter-percentage: 13;

  Inspiration of "Responsive Web Design" by Ethan Marcotte

  http://www.alistapart.com/articles/responsive-web-design

  Golden by Joni Korpi grid system and

  http://goldengridsystem.com/

  */

  / * Mobile layout: 480px and below. */

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 87%;

  padding-left: 8%;

  padding-right: 8%;

  background-color: #FFFFFF;

  background-image: url(400%);

  }

  #header {}

  float: left;

  left margin: 0px;

  Width: 100%;

  }

  #main {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 95%;

  display: block;

  }

  {#slider}

  Clear: both;

  background-color: #6699ff;

  float: left;

  display: block;

  Width: 100%;

  }

  #footer {}

  Clear: both;

  float: left;

  left margin: 0px;

  Width: 100%;

  display: block;

  }

  / * Tablet Layout: 481px to 768px. Inherits the styles of: Mobile layout. */

  @media only screen and (min-width: 481px) {}

  {.gridContainer}

  Width: 93%;

  padding-left: 12%;

  padding-right: 1%;

  }

  #main {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 95%;

  display: block;

  }

  #header {}

  float: left;

  left margin: 0;

  Width: 100%;

  display: block;

  }

  {#slider}

  Clear: none;

  float: left;

  left margin: 0px;

  Width: 100%;

  display: block;

  }

  #footer {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 100%;

  display: block;

  }

  }

  / * Office Layout: 769px to a maximum of 1232px.  Inherits the styles of: Mobile and tablet. */

  @media only screen and (min-width: 769px) {}

  {.gridContainer}

  Width: 85%;

  Max-width: 960px;

  padding-left: 12%;

  padding-right: 0.5752%;

  margin: auto;

  }

  #main {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 95%;

  display: block;

  }

  #header {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 100%;

  display: block;

  }

  {#slider}

  Clear: none;

  float: left;

  left margin: 0px;

  Width: 100%;

  display: block;

  }

  #footer {}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 100%;

  display: block;

  }

  }

  Thank YOU for your interest in helping a novice!

  (I don't know if anything else I should including here.)

  Mary

  Its a simple oversight that make many, forget to add the viewport meta tag to thesection of the page:

• Why dreamweaver cs6 is save my files as firefox html document?

  Hi, I use dreamweaver cs6 on win xp sp 3 and it keeps save my files as a firefox html document and cannot understand how to stop what I have to do my ftp to upload files. It also loaded the files of my site in dreamweaver cs 5 as firefox html document. I am running firefox worm 13.0.1. Any help would be usefeful. I tried searching google and found nothing. And General help from adobe does not wok.

  FYI: HTML docs are docs HTML.  It doesn't matter if the associated file icon is FF, Chrome, IE, or DW. It is always a web document.  There is nothing prevents you to download with your FTP client.

  Nancy O.

• Cursor jumps to the previous when lines typing or entering information in the worksheet

  When you enter information into a worksheet or by typing a document or email the position of the cursor suddenly moves in the middle of typing and inserts text in the wrong position or ceases the text input in the document. I tried to slow down the cursor down and it seems to have had little effect. The help of a USB keyboard and a mouse is good but the return to the use of the normal laptop, and I am facing the same problem. The laptop is a Toshiba Satellite A300 D - 13 X running Vista with windows Mail.

  I would say that there is a problem with your laptop keyboard? How old is it?

  MCDST
  A founding member MCITP - technician Support Enterprise-
  MCTS - Configuration Vista - Charter Member
  MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
  MCITP - Consumer Support Technician
  MCTS - Windows Server 2008, Active Directory Configuration
  MCTS: Windows Server 2008 Network Infrastructure configuration

• Dreamweaver CS6 and CC2014.1 won't open the files

  I'm having trouble with Dreamweaver CS6 and CC2014.1 do not open most of my files.  On two occasions, a technology Adobe had access to my computer, but they were unable to resolve the problem.  A previous support via chat session did not resolve the matter.  After that the 3rd tech was taken out of my computer, the computer go haywire.  It was the biggest mess I've ever seen.  Suddenly he brightened and DW began to work properly.  I went on vacation and after his return, DW won't open most of my files.  I tried all the suggestions in the forums and YouTube.  Someone please help.  I lost many, many hours of valuable work time.

  An interesting thing occurred.  I have just connected my desktop computer to a wi - fi connection in a hotel that uses the service of the Charter.  I can now open my web pages in DW.  A few weeks ago, I used a WiFi by another service provider and could not use DW.  After that I was in a cabin by using the service and everything worked fine.  Earlier today, I was connected with dish and could not use DW.  For 3 weeks, I was in Germany and elsewhere in Europe and had no trouble using DW.  So that explains all the problems.  There are providers of services.

• Adobe ID outside screen gray with swirl in right hand corner when it is prompted to enter information. The rest of the way. I'm locked out

  Trying to run things. Adobe ID required. Enter information. Then I get a gray screen with swirl at the bottom right. Never lets me program.

  Hi lospesca,

  Thanks for posting on the Adobe forums.

  Please follow these steps:

  Navigate to the following location:

  for Win

  C:\Program Files (x 86) \Common Files\Adobe

  C:\Users\username\AppData\Local\Adobe

  for MAC

  Finder > go > go to folder

  \Library\Applicaiton Support\Adobe

  ~\Library\Applicaiton Support\Adobe

  Locate the OOBE folder and rename it to OOBE.old

  Download and install

  Adobe - Adobe Application Manager: for Windows: Adobe Application Manager

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  After installation

  Try to open Adobe Application Manager / Creative cloud App.

  Log in to the Adobe ID and password.

  If it doesn't work try first twice more.

  Let me know if that solves the problem.

  Kind regards

  Sandeep

• Installation of Dreamweaver CS6 on Lion seems to have broken the video playback

  Last night I was able to play videos on the Adobe site (for example, CS6 & Creative characteristic cloud Tower for the Web) on Safari and Chrome. After downloading and installing Dreamweaver CS6, I can't play these videos. Loading of the page, but the display still blacked out. I checked that I was still able to play the videos on another computer on the same local network. Also, I have confirmed that I can still play videos on YouTube. It just seems to be the Adobe website that broke.

  My computer is a Mac Pro running OS X Lion. I installed CS6 using an administrator account and restarted after the complete installation.

  Anyone run into a similar problem?

  Please try to install it. Maybe it's just a coincidence that just before the download of Dreamweaver, I could see the videos and after installation, I could not. These things happen, unfortunately.

  I found some similar problems in any other Forums Adobe. I went into the settings of the Flash, active the option to third parties save Flash components and added tv.adobe.com and images.tv.adobe.com as trusted sites. Now I'm able to view the videos again.

• VPN concentrator to transmit user group information to the IAS server?

  All,

  the feeling that the answer will be no, but we have replaced our MS RAS server using a VPN 3030 using an IAS server for authentication on a Win2k3 domain. The question we have is that some people share files FCP with people from other groups. HIA just validates the user password and verifies that they are in a private network allowed virtual group, which is then allowing them access more than they should, is it all the same for the hub the information on an IAS to control server as well? If not, does anyone know how to check popular ID using the remote VPN access are in the right group to which they are connected?

  Sorry I think I did the above clear as mud!

  Do not know your question, but you can cause the IAS server to assign a group to a user by adding the attribute class to a specific IAS security policy. Add class = OU = groupname; (do not omit the semicolon) for the attributes RADIUS IAS policy against which a user will be auth, and this will have an impact to the 3030, which will assign them to the appropriate group.

  I hope this helps.

• I have Dreamweaver CS6 and I try to update with the latest patch 12.03

  I have download the file (for Mac) which opens 'AdobeDreamweaver-12, 0-All-Update' and when I apply the patch and re - open DW, I see that one still reads version 12.  No change.  The date of the application is still in 2013, so no change seems to have been done.

  How can I make sure I have the latest version and the best of DW CS6?

  Thank you!

  CS6 is now legacy software.

  There is no longer supported or updated.

  The last update was published in 12/2012

  Adobe - Dreamweaver Support Center: Updaters

  NOTE: Gap phone build in DW disappeared.  For the latest version, you must go directly to the PhoneGap Build web site.

  As far as I KNOW, when you install the latest update available for license for DW perpetual CS6, it does not reflect the new build # in your help menu.  It remains the same as before.

  Nancy O.

• where is 'designer CSS in Dreamweaver CS6 option? I'm not in the drop-down list 'window '...

  I watch a tutorial on wordpress and dreamweaver. In the tutorial, the instructor begins CSS designer by going to the menu "window". The option is there. When I go to him, the option is NOT there. What gives? @

  The Panel CSS Designer is a relatively recent addition to DW. The version of DW you are using is older than the video tutorial at least a version.

  He has quite a few changes between these versions...

  Perpetual DWCS6 (disc/one-time download)

  DWCS6 cloud (subscription)

  PCOC (one with the Panel CSS Designer)

  PCOC 2014

  You really must ensure any tutorial you use matches your exact version of the program. Even if it does, updates to versions of cloud can make that information obsolete in short order.

• Can not enter information in the body of an email to hotmail.

  My hotmail will take TO information and information of subject but will not allow anything in the body so I can't send e-mails

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• Explorer Windows-why are header fields not fill with information about the files?

  I've added a few new header fields to locate some files in Windows Explorer because I need to get the counts for the number of files in each folder and transfer this information to a spreadsheet.  It would be easier that when I opened the main file would be listed all the sub-files and the information I need would be just listed in the field next to the header file.  Otherwise, I need to right click on each file individually and go to properties to get the count of file information.  Any help would be appreciated, even if it's another way to get the leaders for each individual file.  Thank you!!

  Hi Glen,

  Because your problem is by design, you can leave your comments on the following Web site:

  http://connect.Microsoft.com

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Must be able to enter information where the calculation is present

  I have a form in Acrobat Pro, which is used to provide a fee. If someone is being reimbursed for miles, I need to calculate 0.56 * the number entered in the field 'Miles' that continues automatically in the "Amount" field using the calculate function. However, if someone needs to be reimbursed for anything other than miles, nothing can be entered in the 'Amount' field because a calculation is - even if it is zero... How can I fix a person can enter a different amount if the miles are not used? Is there a way to tell if something is entered in the mile, otherwise leave blank to get into computing, and allow data to be introduced?

  It is not difficult and it could be something like the following:

  Custom calculate script for amount field

  (function () {}

  Get a reference to the Miles field

  var f = getField ("Miles");

  Perform the calculation if a change in the

  Miles field, that's what triggered the calculation

  If (event.source & event.source = f) {}

  Event.Value = util.printf ("%.2f", 0.56 * f.value);

  }

  })();

  If you do not have the read-only field (as you normally would for a computed field), the user will be able to change the value of the field.