Why I can't open my PSD Acer eDataSecurity Management? __i have a lot of information in it staff. A can I retrieve this information?

Similar Questions

• Why I can't play this file?

  2 + 2 = 5 and it is confusing to me.

  I have a Windows Pro 8.1.  I'm logged in as domain administrator.  I created a folder at the root of my C drive, called 'Test '.  I copied a file in it called "test.pst" (the file outlook 2010).  When I try to open it, Outlook tells me "access denied file."

  The file and folder have all permissions for authenticated users, system, (local) administrators, (local) users and Administrator@mydomain (who I'm signed until).  The folder and the file are owned by the user that I'm logged in as.  Despite all this, Outlook always tells me that access is denied.

  One thing I noticed, is that the read-only attribute is set on the folder.  So I go into properties. Uncheck the read-only box, it tells me I need administrator permissions, I agree, no error.  Redo the properties and it is always read-only.

  I didn't create a folder in the root of my C drive, copy the file in there and I'm reading it.  Why can't read this file or change the read-only attribute on his record that contains?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• When I opened my site of muse in the presentation of the tablet support firefox - why - how can I fix this

  I always feel this issue - even if I tried some of the suggestions of messages. And me that happens on multiple laptops, not just my own.

  URL is www.dawnscorner.com

  Thank you for your help.

  Your Blog Office page contains many links that are specific to Tablet pages. Once a visitor to the site following one of these links from that moment they will be blocking tablet look a mode for the site in their browser until they follow a link that specifically goes back from the page of the tablet to a page of office (or they delete cookies, because a cookie is used to store the device locking).

  Fix the links on your Blog Office page to point to the office pages and site visitors is no longer going to be misdirected to your layouts of the tablet. You can also consider adding the link at the bottom of your home page to allow a site visitor to switch between layouts, if the default layout for their device is not adapted to their needs (Site Office and Tablet Site links on the mobile home page, Tablet and phone links on the desktop homepage and links office and phone on the homepage of Tablet).

• Why I can't save this file?

  Hello!

  I'm having some trouble with this file of labview. I want to create a loop of 16 sequences stacked the same controls that includes two linear actuator and valve 12 controls (the files are attached below). Each sequence of the 16 sequential stacked are essentially a duplicate of the same series of the screws. However, I found that economy times become more and more as I approached 16 batteries. For example, the stack of 12, it took about 15 minutes and then the battery 13 he took 20 minutes.

  This wouldn't be a problem normally as I have to wait any longer right? No, the 16th cell and while the economy, the program keep alternating between a program not responding and a program that responded to the questionnaire according to the windows Task Manager. The file also can't be registered little matter how long wait. Is this a problem with the computer processing power? or is there a limit on the program labview himself (as the cant have more than 15 stacked sequences, too redundant codes etc.). I use 2013 labview, an NI DAQ usb-6223 (I think) and two engines for this program.  I posted a file which contains the motor controls I want to put in each sequence, but also a shortened version of the control valve file.

  Kind regards

  Gabriel

  I suggest you take some LabVIEW tutorials, urgent. I saw that you said "stacked sequence" and then saw that your VI has 4 mb in size (most are<1mb) so="" i="" suspected that="" something="" definitely="" wasn't="">

  (1) get rid of the structure of stacked sequence. It of a horrible construction and hides most of your code!

  (2) the constant button/case structure/true or false is entirely redundant, you can wire all the values to the DAQ assistant, like this:

  

  (3) limit your block for a single screen diagram to the size, I had to scroll a lot of empty space to find your chart!

  (4) to lose the screw of assistant DAQ 150 or more and replace them with the appropriate DAQmx functions. You will probably be able to replace all instances of the DAQ assistant with a single DAQmx write 150. Each of these assistants DAQ contains a lot of code to initialize the device, write the data, and then close the device which explains why the VI is 4 MB in size and probably why it runs slowly. You can probably replace the lot in a single while loop & IEA case, according to what you're trying to reach really.

• I get "Windows can't check for updates" everytime I try I get a "an error occurred" why I can't get this to work?

  I can't get updates at all. I did have one in 2 weeks because the automatic update can not pass for some reason any... Does anyone have this problem before?

  CharlesPyle,

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  06/20 / 1109:22:48

• Why I can not uninstall this faulty downloaded YouTube application?

  When I click on 'uninstall', it does nothing, and when I click on 'disable', it is only temporary... Please help!

  I'm sorry to hear that the Uninstall button does not work on the add on which has been installed in your Firefox for Android. The only other recommendation I can make is to uninstall the application and reinstall Firefox for Android.

  To avoid the loss, I can recommend to use sync to merge all items backed up to another profile.

• Why I can't access this channel name?

  Hi all

  I'm pragmatic about this VI creating a task and add a channel.  I then get the channels, the first string of the index and tries to open it.  LabVIEW says it's an invalid string!  If I create the task in MAX, indexing the channel and reading his propertied works very well.  I read a lot of literature, but I don't see what is the problem here.  Any ideas?

  Thank you all,.

  Michael.

  

  Michael,

  You have wired a channel at the entrance of the task of the DAQmx channel property node.  You must connect the wire of the task to it.  Then use the property 'ActiveChans' of the node property to distinguish between the channels in your task.  I've attached an example how to do that.

  Hope that helps,
  Dan

• Before buying a new laptop, the laptop that I had Microsoft Office 2007 and I want to know why I can't transfer this program to my new laptop?

  I bought a laptop that already had 2007 program above.  I recently bought a new laptop and I was told that I could transfer my 2007 Microsoft Word and Excel to my new laptop computer using my product key of my older laptop.  How to get this transfer?

  Unless you have purchased a retail version of Office, it cannot be installed on one new/another PC

  You cannot transfer a program, you need the original installation and the program key support

  See if your key is validated on this MS site if it's download/save the Setup file and install then, having first uninstalled any Office pre-installed on the new PC trial

  http://www.Microsoft.com/Office/downloads/

• someone has stolen my email address and all my information. How can I retrieve this address from the hacker?

  Someone has stolen my Hotmail address (* address email is removed from the privacy *). I had this account forever, and one who stole he had access to a large number of personal information. I would like to know how to recover this address (that is to say how to access since the pirate and insert a new password?

  Mike

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• why I can't open a link to a PDF file in a new tab?

  I want to click on a link in an email that I was sent just to my teacher after his seminary, which is supposed to open a PDF of the info. But when I right click on it and select open in a new tab, only a white page! But, since I KNOW there must be a correct link, I've tried around and found another way: if I select, "save link as", a window appears and allows me to save it as an adobe PDF file in my computer drive, I can then open and read. Why?
  I mean, what could be the problem? I have never had a problem before you no longer can something right click and select "Open in new tab" and make it work just that like, without the extra steps!

  A link can have several different handwritings in the annex that replace the normal behavior. It is actions that occur when you click (mouse down followed by mouse) a mouse button is pressed on the link (the mouse down) or when he is released on the link (the mouse upward). Usually the right click > open in new tab/window those who will bypass.

  However, in some cases, when you hover over a link you sometimes see that she has no destination address, or seems to be pointing to the same page or starts with javascript:. In these cases, the right click operation fails because it copies this link does not exist or dysfunctional instead of running the script attached to the link.

• Why open one of my favorites in the sidebar and how can I solve this problem?

  One of my bookmark sites always opens in the sidebar. Why? and how can I solve this problem?

  Opening in the sidebar is the default action for bookmarks created via a "Mark this Page" link or button on a Web site. Make sure you use many methods to "Bookmark this Page" located in Firefox instead.

  Right-click on the bookmark and select Properties, then turn off the preference for the load this bookmark in the sidebar, and then click Save.

• Why I can't open a WPS on SkyDrive?

  Why I can't open a WPS on SkyDrive?
  I think I should be able to convert a WPS in DOCX file into the cloud.  In my humble OPINION, this task is an ideal application of cloud.

  GFH

  ASK THE QUESTION IN THE FORUMS OF SKYDRIVE:
  http://windowslivehelp.com/forums.aspx?ProductID=6

• Why I can't open the attachment in Outlook express?

  Why I can't open the attachment in Outlook express?

  Try to save the first attachment, then try to open it.  See also www.oehelp.com/OETips.aspx#1

  Steve

• why I can't open my facebook page

  Why I can't open my facebook page and other pages of the Web site are open easily

  Hello

  (1) don't you make changes to the computer before the show?

  (2) is the computer connected to a domain?

  (3) is the issue limited with only the facebook site?

  (4) what browser do you use? If internet Explorer then which version?

  If you are using internet explorer, follow these steps:

  Method1: Try to open Internet explorer in compatibility mode

  http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE-9/features/compatibility-view

  Method 2: Try to use facebook-add mode:

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  For reference:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  I hope this helps.

• I can't open files PSD on a Mac.

  Hello.

  I have Photoshop CS4 installed on an iMac OSX 10.11.6. I also Adobe animate CC. Since I installed CC animate, I can't open my file Psd files my documents on my iMac.  I can open Photoshop CVS4 and inside Photoshop psd files, as usual, but I can't open my PSD files by searching in the documents folder. an error message comes up saying "check with the developer to ensure that Adobe Photoshop CS4 works with this version of Mac OS x. You may need to reinstall the application '.

  Can anyone advice on this problem?

  Thanks for any help.

  Try to reset the associated file:

  • Right click (or control click) a .psd file > Get Info
  • Replace 'Open with' Photoshop CS4
  • Change all the