Why I get this error? dblink

Similar Questions

• Please someone tell me why I get this error, as my D: recovery drive has 3 GB of space on 28, I don't know how to delete it and it may be the cause but I'm not sure, that's why I'm here :(

  The error is the reference 0x00c91187
  memory 0x47be01e0. The memory could not be read

  Here is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error

  I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files

  It dose it when you try to run an apillication game. or other

  Sorry for not being detailed

  I hear by clear weather, how to free up space on my D: recovery drive?

  and I am referring to the game app is soldier fonts 2, it gives me error when I start the game

  and no, I only get this error with the soldier make game 2 application only

  and here's a better link RII

  Sorry for the inconvenience

  http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ

  OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  

• Why I get this error message (updated as Lightroom CC/6 - updated Juni 2015 ist nicht anwendbar. Fehlercode: U44M2P28)?

  updated LR LR 6.1 6.0, I get this error message:

  As Lightroom CC/6 Update - June 2015

  Update ist nicht anwendbar. Fehlercode: U44M2P28

  
  

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  -U44 more... discussion http://forums.adobe.com/thread/1275963

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• Why im getting this error: "ORA-22813: value of the operand exceeds the limits of the system.

  HI EXPERTS...

  Please helpme to fix this...

  I have a database of oracle 11g, runnint on a Windows Server 2008:

  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production

  I have two tables:

  CREATE TABLE UTILS. SEG_ROLES

  (

  VARCHAR2 (12-BYTE) APPLICATION,

  ROL VARCHAR2 (12-BYTE),

  USERS VARCHAR2 (255 BYTE)

  )

  TOGETHER TO DEFINE

  Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ('MULTIPLAN', 'ADMIN', 'ADMIN');

  Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CAR01', 'PATY');

  Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CAR02", "FABIOLA, ERIKA");

  Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CON01', 'LUCY, PATY');

  Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CON02', 'VALERIA');

  COMMIT;

  CREATE TABLE UTILS. SEG_ACCESOS

  (

  VARCHAR2 (12-BYTE) APPLICATION,

  ADMROL VARCHAR2 (12-BYTE),

  VARCHAR2 (20 BYTE) MENU,

  OPCION VARCHAR2 (20 BYTE),

  TYPE VARCHAR2 (5 BYTE),

  OBJETO_MENU VARCHAR2 (40 BYTE),

  ACCESO VARCHAR2 (2 BYTE),

  ROLES_ACCESOS VARCHAR2 (255 BYTE)

  )

  TOGETHER TO DEFINE

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "ROOMMA", NULL, am', 'm_coloca', the of ', 'CAR01, CAR02');

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "PUT", "PREVALIDA", "SM", "sm_prevalida", the from ', 'CAR01, CAR02');

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "PUT", "PRECOLOCA", "SM", "sm_preColocacion", the from ', 'CAR01, CAR02');

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", 'ADMIN', 'LOVE', "COLOCACIÓN", "SM", "sm_colocacion", the from ', "CAR01");

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "PUT", "REGCOLOCA", "SM", "sm_regcoloca", the from ', "CAR01");

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "LDP", NULL, am', 'm_PLD', the of ', "CAR01, CAR02, CON01 CON02");

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "LDP", "LN_CONSULTA", "SM", "sm_PLD_LNConsulta", the from ', 'CAR01, CAR02');

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "LDP", "LN_BARRIDOMASIVO", "SM", "sm_PLD_LNBarridoMasivo", the from ', "CAR01");

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "LDP", "REP_INICICLO", "SM", "sm_PLD_ReporIniciclo", the from ', 'CON01, CON02');

  Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

  Values ("MULTICLIP", "ADMIN", "LDP", "LN_BITACORA", "SM", "sm_PLD_LNBitacora", the from ', "CON01");

  COMMIT;

  - And this point of view:

  
  

  CREATE VIEW UTILS. VW_ROL_USER AS

  Select distinct APPLICATION, ROL, trim (column_value) USUARIO

  from (SELECT APPLICATION, ROL, USERS USER

  FROM UTILS. SEG_ROLES

  WHERE IT IS NOT NULL TO USERS

  ORDER BY APPLICATION, ROL

  ) t,.

  XMLTable ((' «' ||)) Replace (USER, ",", "",""). '"'))

  order by APPLICATION, ROL, trim (column_value)

  CREATE VIEW UTILS. VW_ACC_ROL AS

  Select distinct APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, trim (column_value) ROL

  (SELECT APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS ROL

  FROM UTILS. SEG_ACCESOS

  WHERE ROLES_ACCESOS IS NOT NULL

  ORDER BY APPLICATION, ADMROL, MENU, OPTION

  ) t,.

  XMLTable ((' «' ||)) Replace (ROL, ",", "",""). '"'))

  MENU, TYPE, OPTION, APPLICATION control, trim (column_value)

  CREATE VIEW UTILS. VW_SEG_ACCESOS AS

  SELECT VACR. APPLICATION, VACR. MENU, VACR. TIPO, VACR. OPCION, VACR. OBJETO_MENU, VACR. ACCESO, VACR. ROL, VUSR. USUARIO

  FROM UTILS. VW_ACC_ROL VACR,

  UTILS. VW_ROL_USER VUSR

  WHERE VACR. ROL = VUSR. ROL

  ORDER OF VACR. APPLICATION, VACR. ROL, VACR. MENU, VUSR. USUARIO, VACR. TIPO, VACR. OPCION

  When I ask the last posting, it works fine:

  SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

  But when I add conditions:

  SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

  WHERE VSEG. APPLICATION = "MULTIPLAN.

  AND VSEG. USER = 'PATY '.

  It generates this error:

  ORA-22813: value of the operand is greater than the limits of the system

  Cause: The value of the object or the Collection was too big. The size of the value might have exceeded 30 k in a context of TYPE, or size may be too large for the available memory.

  Action: Choose a different value, and try the operation again.

  Why?

  Thanks in advance...

  Finally found a SOLUTION at: http://stackoverflow.com/questions/14328621/oracle-10g-splitting-string-into-multiple-rows

  just change the way we create the view using the regexp_substr.

  CREATE VIEW UTILS. VW_ROL_USER AS

  SELECT distinct trim APPLICATION, ROL, (regexp_substr (USERS, ' [^,] +', 1, level)) USER

  FROM UTILS. SEG_ROLES t

  WHERE IT IS NOT NULL TO USERS

  CONNECTION BY instr (USERS, ',', 1, level - 1) > 0

  order by APPLICATION, ROL

  Thank you all

• Why I get this error and how to fix it?

  I'm new to actionscript. I followed a tutorial on lynda. I am trying to learn how to create flash games. I'm using flash cs4. The tutorial uses ActionScript 3.0 and flash cs3. I added a clip to my library and permit to export for actionscript. I got a dialog box indicating "a definition of this class is not found in the classpath, then it will be automatically generated in the SWF export." I click ok. Then, when I try to test it, I get an error that says "call to possibly undefined method '. What exactly am I doing wrong?

  It works fine for me.  Adjust you the binding class to the cursor name in the library as well?

• Why I get this error message?

  Why do this error and how to fix it?
  
  Query:
  < name cfquery = "yearlyChart" datasource = "#dsn #" >
  SELECT sum (distance) AS yrDistance, walkDate
  OF bockWalk
  WHERE the year (walkDate) = #year (Now ()) #.
  GROUP BY month (walkDate)
  < / cfquery >
  
  Error:
  You tried to execute a query that does not include the specified expression 'walkDate' as part of an aggregate function.

  When I deleted the table style attribute it worked correctly. So I think you just need to tweak your xml file some.

  Trevor

• BlackBerry smartphones 'Backup Assistanmt met with a security error. Please check the application authorization"why I get this error?

  And my phone lose all other functions (i.e. alarm) when this error came. It's like its offline... How can I fix it?

  Normally, this has to do with the policy settings on your desktop computer. If you use a computer, you need to user or rights the administration of power for what you want to do.

  If you are on your home computer, fix your settings so that you are the administrator on your computer.

  What I describe is a common reason where I found that the computer will not back up the files from the phone on the hard drive.

  Jerry G.

• Why I get this error? ORA-00932: inconsistent data types

  It's my stored procedure, I created to select only the exact amount of records per page to a GridView (for ASP.NET):
  

  CREATE OR REPLACE
  PROCEDURE SELECT_COMMAND
  (pTable IN VARCHAR2
  , pFields IN VARCHAR2
  , pSortField IN VARCHAR2
  , pPageIndex IN NUMBER
  , pTotalRecs IN NUMBER
  , pResultSet OUT SYS_REFCURSOR
  ) AS
  BEGIN  
    EXECUTE IMMEDIATE 
    'SELECT ' || pFields || ' FROM '
    || '(SELECT '|| pFields ||', ROW_NUMBER() OVER(ORDER BY '|| pSortField ||') ROW_NUM '
    || 'FROM '|| pTable ||') WHERE ROW_NUM BETWEEN '|| to_char(pPageIndex*pTotalRecs) ||' AND '
    || to_char((pPageIndex+1)*pTotalRecs)    
    INTO pResultSet;
    -- Plus 1 to our index because GridView is a zeroth index collection
  END SELECT_COMMAND;

  I then do a test case with the following parameters:
  

  declare
  p_test sys_refcursor;
  begin
  select_command('v_sig_devices', '"JOB", "LINE"', '"DEVICE_ID"', 0, 10, p_test);
  end;

  But I get the following error:
  
  >
  Error report: ORA-00932: inconsistent data types: expected - was -.
  ORA-06512: at the 'SIM '. SELECT_COMMAND', line 10
  ORA-06512: at line 4 level
  00932 00000 - ' incompatible data types: wait %s %s got. "
  >
  
  At first Oracle gave me an error because the figures were not a string. Can I convert it to a string (with to_char) and Oracle is still not satisfied! Any ideas as to why this is happening?
  
  Thanks for any help you can provide.

  Suppose you want sth. as

  ...
  OPEN pResultSet FOR 'SELECT ' || pFields || ' FROM '
    || '(SELECT '|| pFields ||', ROW_NUMBER() OVER(ORDER BY '|| pSortField ||') ROW_NUM '
    || 'FROM '|| pTable ||') WHERE ROW_NUM BETWEEN '|| to_char(pPageIndex*pTotalRecs) ||' AND '
    || to_char((pPageIndex+1)*pTotalRecs)  ;
  ...
  

• why I get this error Rundell C:\WINDOWS\ivoqadir.dll

  My friend has a Rundell C:\WINDOWS\ivoqadir.dll windows error cannot find C:\WINDOWS\ivoqadir.dll or similar, whenever he starts his pc (Windows XP 32-bit)

  Any suggestions how to fix this? Although everything seems to work fine!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Why I get this error memory?

  I have an old imac of five year with all running the latest version of Yosemite and the Suite of Microsoft Office 2011 it's updates.  I am running eight concerts in two slots four memory (i.e. use eight out of a possible 16 concerts.)  I occasionally mistakes but only when using Microsoft applications like Word and PowerPoint that will delete graphics and the message says: "unable to display this image.  Your computer doesn't have enough memory. "- What is the solution to get more memory four gig two chips/cards for dwellings empty remaining or would be - this something else?

  RAM can and doesn't fail. Have you installed the RAM yourself or was the original as RAM having been shipped from Apple. iMacs are sensitive using quality RAM, so if you have used a brand of 'value', then you can see one of the problems with that.

  What I recommend to download and run an EtreCheck report (www.EtreCheck.com) and display the results in your reply to this message. The report will indicate the obvious problems and then we can give you some advice.

• Why do I get messages saying that I have not destroyed tabs; I ususally click on the red dot. why I get this error message?

  In the past I could navigate from one site to another without closing a tab. The messages now appear that say I have does not close a tab and need to close or to restore. I tried closing of tabs as I've used them but my tab bar shows no tabs open when I close Firefox. When I restart Firefox I get messages saying that I did not close the tabs! It's very annoying. How do I put it back for when I click the red dot, it is closed. and when I restarted Firefox it just goes to my home page? I use a Mac 10.6.8

  No, there is no problem now with this parameter when the bug is fixed.
  the problem is basically firefox 20 wrong classifies this way to close the browser as an accident & will launch the restore function of session at the next launch of the browser. the key to everything: config above completely shuts down service sessionrestore for accidents.

  Once the bug should be fixed in firefox 21, I would recommend resetting browser.sessionstore.resume_from_crash back to its default value "true" If, so that you get the benefit of a restored session, where firefox crashes really some time.

• why I get this error message: "[{'success': true, 'attachmentFailure': false, 'isSuccess': true, 'attachTooLarge': false}]" when I send a mail with attachment

  Opens a separate window, and this message.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences< enter > in the address bar

  Select Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

• Why I get this error?

  "Before proceeing you must all first to launch Adobe Acrobat and accept the end user license agreement". Especially when I did what I was told, on your websight for download Adobe Acrobat software

  Do not click on accept. Acrobat, Adobe Reader

  Mylenium