Why IP need to know its information phone of VLAN?

Similar Questions

• Hello, I need to know if my phone is compatible with the current version of Adobe Creative cloud.

  My equipment is:

  Samsung N 550.i7

  Graphics card: Nvidia GeForce 630 M.

  Thank you.

  The system configuration required

  Creating cloud - https://helpx.adobe.com/creative-cloud/system-requirements.html

• You want to know more information about ICS 4.04!

  Hello

  I'm very happy on this update of ICS released 4.04, but I need to know more information about it.

  What are the differences between 4.03 and 4.04 of ICS ICS?

  and 4.04 will be available for all devices which had 4.03 for Xperia Arc S?

  Concerning
  

  If it is not available for your phone and you want 4.0.4 now then

  How to upgrade manually 2011 build Xperias to 4.0.4 android number 4.1.B.0.431

  http://talk.sonymobile.com/thread/38251

  Don't forget to mark the correct answers & useful answers

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• My wife needs an account to Microsoft for its windows phone that she can't get a pwd to work I don't think she ever put in place which can do to help

  My wife needs a Microsoft account for its windows phone she can't get a pwd to work I don't think she ever put in place which can do to help

  My wife needs a Microsoft account for its windows phone she can't get a pwd to work I don't think she ever put in place which can do to help

  The answer is simple:

  Create an account for it... It has been quite easyer to do now!

  Not just cumbersom, though it HAS been previously.

• Hello!!! need help! need to know if the book of Jim Maivald on Adobe dreamweaver is included in my purchase of adobe creative cloud.  Please inform.  Thank you!!!

  Hello!!! need help! need to know if the book of Jim Maivald on Adobe dreamweaver is included in my purchase of adobe creative cloud.  Please inform.  Thank you!!!

  No, it isn't.

• Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

  Phone support | Orders, returns, exchanges
  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I need to know if there is a way to EXPORT information from OLD PDF forms in a file C.S.V.

  Hello

  I need to know if there is a way to export DATA from PDF forms, we have done over the past 2 years into a CSV file so I can add to my customer database? I hope that there is a simple way to do it. Please let me know if there are.

  Hi TCCTech,

  There are two or three option as *.fdf, *.xml. That later, you can convert to CSV using third-party applications.

  Or you can merge with the existing worksheet.

  

  Kind regards

  Ajlan Huda.

• I have an old Millennium edition I know sound as old as it might seem. I need to know if I can up grade my computer using Windows 7

  I have an old edition of Me of the Millennium, I know its as old as its sounds. I need to know if I can upgrade my computer using Windows 7

  Hello

  Unfortunately, it is not possible to upgrade directly from Windows Millennium Edition to Windows 7.

  You must install Windows 7 as a new copy on the system.

  I suggest you refer to the link for more information on the operating instructions below to buy and install Windows 7 on the system.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  To know if your PC can run Windows 7 download the Windows 7 Upgrade Advisor from the link provided below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  You can also check the following to check if your material conforms to the system requirements to install Windows 7 on the system:

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 system requirements

  http://www.Microsoft.com/Windows/Windows-7/get/system-requirements.aspx

• I need to know how to reset my printer

  I need to know how to reset my printer to its factory settings, it is a hp deskjet 3630 series all-in-one

  Hey @Joshua3, welcome to the Forums of HP! The only reset I know of this printer is complete when the printer is in an error state. If you want to perform this reset, you can use the instructions below in the user manual:

  Reset the printer.

  1. turn off the printer.

  2. unplug the power cord.

  3. wait a minute and then reconnect the power cord.

  4. turn on the printer

  May I ask why you need reset instructions. You may be looking to reset the network?

  To restore the default settings network settings

  ● Press the wireless button and the Cancel button in the control panel of the printer at the same time and then hold down for three seconds.

  You can find this and more here: series of all-in-one HP DeskJet 3630 User Guide

  Please let me know if this resolves your request by marking your post as solved (click on Accept as button Solution below). If there is anything else I can help you, let me know.

• I need to know if the Z5 will be available in U.S. stores.

  Before I spend $700 on a premium warranty Z5 on Amazon, I need to know if Sony ever plans when the Z5 series is released in stores over the next two months. By the looks of it, he doesn't look like that but maybe someone has more information on that here.

  Thank you

  @Ninjabird7

  You may contact Sony directly > Local support

  but check your past messages

  you already have an official response

  http://talk.sonymobile.com/T5/Xperia-Z5-Z5-compact-Z5-premium/Z5-premium-us-release/m-p/1068981

  Maybe there will be more information after THESE, I have a premium of Z5 and its amazing.

• I need to know how to determine my processor architecture or know what it is

  I looked around the site for the answer to my question 'how do I determine processor architecture?', but all I got is how to determine the weather its 64-bit or 32-bit. I need to know if my processor is AMD or i386

  I have an Intel Celeron proccessor under Windows 7 Home Premium... Can you tell me, on this basis, weather or not im AMD or i386 or tell me how to determine

  How will I know if my computer is running 32-bit or a 64-bit version of Windows?

  To find out if your computer is running a 32-bit version or 64-bit Windows Windows 7 or Windows Vista, follow these steps:

  1. System opened by clicking on the button start , right click on computer and then click Properties.

  2. Under system, you can view the system type.

  How do I know if my computer can run a 64-bit version of Windows?

  To run a 64-bit version of Windows, your computer must have a processor 64-bit capable. To see if your processor is 64-bit capable windows 7 or Windows Vista, follow these steps:

  1. Open data on the performance and tools by clicking on the button start , and then clicking Control Panel. In the search box, type data and performance tools, and then, in the list of results, clickPerformance information and tools.

  2. Do one of the following:

     • In Windows 7, click view and print detailed performance and system information.

     • In Windows Vista, click view and print details.

  3. In the section system, you can see what type of operating system you are currently running underSystem type, and whether or not you can run a 64-bit of Windows 64-bit version. (If your computer is already running a 64 - bit windows version, you won't see 64 - bit capable list).

  
  You can also run CPU - Z [1] to determine if your processor is 64-bit capable.

  André

  [1] http://www.cpuid.com/softwares/cpu-z.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.

• I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

  I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

  Hi Tere,

  You can see this Microsoft article to strengthen the security of your computer and your network.

   

  Make your network more secure

  http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

   

  Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

  Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

  Share files via public folders

  http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.