Why is it essential to secuity Microsoft Update freeze my computer?

Similar Questions

• Microsoft Update freeze my computer

  OK, let's go...

  On December 8th or 9th there was an update from windows that I had installed and went to bed. The next day, when from my computer all loaded to the top and 2 seconds later everything I can do was move my mouse. I can't click on anything. I know that I didn't before this was a windows update. nothing else in the month has been downloaded or installed on my PC.

  I rebooted and still the same. So I decided to do a system restore. I force rebooted my computer in safe mode and if the system restores. Everything worked well. I had used the computer for a few hours without problems. "until I noticed that windows update has appeared on my restart button. so I said to myself. Let me restart and see if everything is ok. I restarted my computer and loading upward, I had the same problem. 2 seconds frozen after all except my mouse pointer and a small circle rolling around 'work' and all I can think about was call DELL since last year, I bought my computer. I called them and they had me to do a full restore. (who's always there answering a problem) I did it because I didn't have a lot on my pc anyway. Everything was back to normal. I loaded up and everything was fine, I had to install the updates again and always work. but the second set of 2 or 3 update is where I ran into the problem again. FROZEN SCREEN! other than my mouse. so. now, I did a restore of the system again and that they made the great list of updates but I have disabled the future updates. I won't install because I know what will happen. can someone please help me with this because dell says it's a Microsoft update problem that is making my computer. Help, please! I will now list which computer I use. I hope someone can get back to me on this problem.

  Thank you.

  WINDOWS 7 64 BIT

  • Processor
    • CPU_Name: Intel (r) Core i7 - 4820 K CPU @ 3.70 GHz
    • CPU_Manufacturer: GenuineIntel
    • Manufacturer: Alienware AURORA R4
    • NVIDIA GeForce GTX 780
    • 16.0 GB of RAM

  I hope someone can help me with this.

  Alex

  Hello

  Thank you for the update.

  Try this:

  Optimize Windows 7 for better performance.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Suggestions on how to update Microsoft Updates when a computer has not been upadted in one year

  have a laptop with Vista on it. The laptop has not been updated (it has been used) in almost a year. I know that there must be a TON of updates it needs Microsoft.

  Another concern that the amount of updates that will be found will crush the computer. How can I update in a safe and less massive way?

  I thought to download all the updates, but simply install a little at a time.

  But I think that the amount of download will be as overwhelming

  Repost

  check marks beside the updates you want to install.

  "If it ain't broke, don't fix it." 90% of the edits, even those labeled as 'critical' no effect not me. I don't use Outlook for e-mail, I do not use Windows Live Mail, is not a server, it is not a media center, is not a game platform, etc., etc.

  I had long climbed out of the car "must always be updated software" long, particularly when it comes to and because of Microsoft updates.

• Microsoft updates keeps laptop computer misuse of my husband

  The other day I jumped the laptop open & he said that it has been updated 2 3 or something to that effect. It remained like that for hours without having it done. I had to do a repair and restart it at an earlier date to get going again. This has happened three times since. Today, I was actually online looking at something up when I hit my offline & this scenario all started again. What gives? What is c?

  The other day I jumped the laptop open & he said that it has been updated 2 3 or something to that effect. It remained like that for hours without having it done. I had to do a repair and restart it at an earlier date to get going again. This has happened three times since. Today, I was actually online looking at something up when I hit my offline & this scenario all started again. What gives? What is c?

  First of all, read this MSKB to and do step 1 to clean boot Vista: How to troubleshoot a problem by performing a boot in Windows Vista
  Open Internet Explorer by right clicking it's icon or a shortcut and choose "Run as Administrator" , enter the password if one is used, and then click on continue. Then, go here: How to reset the Windows Update components?
  Click the Fixit button and allow the Fixit run to its default option.
  When the Fixit is complete, restart the system, leaving in the clean boot state.
  Now let's see if the updates install now.
  If they don't, then do step 7 to cancel the State of clean boot and boot the system in normal mode of Windows.

  If they do not, please copy and paste the last lines 50 or so WindowsUpdate.log in your answer:
  How read windowsupdate.log

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows Vista won't start after installation of microsoft updates

  I just install microsoft updates, then the computer is turned off and it does not load windows.  A box appears that says
  Microsoft Visual C ++ Runtime Library.
  This application has requested the execution to terminate in an unusual way.  For more information, contact the application support team.

  The options are to click OK or close the box.  I tried both and it just keeps popping up the same box as above.

  Hi Mas_007,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:

  To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.

  (B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

  (C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:

  I suggest to empty the temp folder and later, follow these steps:

  i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Additional information: http://support.microsoft.com/kb/936212

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Update is broken?

  After the patches Microsoft November 2014 have been released, I have connected to the Microsoft Update web site and look for updates for Office 2007 Suite installed on my computer, and Office 2007 has been patched successfully; my computer still has loaded XP but I also genuine Office 2007 is installed, including Microsoft Update (not Windows Update) regularly checks the updates. Yesterday I even clicked on Microsoft Update (http://update.microsoft.com/microsoftupdate... but the page did not open and displays the message "this site has encountered a problem and cannot display the page you are trying to display.) "The error no.: 0 x 80248015. My second computer with XP but with genuine Office 2007 could not be connected to the Microsoft Update web page either and the same message was displayed, which shows that the error is not specific to one computer. Microsoft Update web site is temporarily down? Or started Microsoft prevent users from Windows XP from Microsoft Update, even if these users always have other Microsoft products like office and always need to run Microsoft Update. The procedure gave me last year I've updated Windows Update on the second computer components, where the Update window now properly works but as soon as I go to Microsoft Update from Windows Update, the error message is displayed. So, it is definitely a problem with Microsoft Update. The computer clock is synchronized automatically and I also synchronize manually at any time.

  I would appreciate help with this problem, because I still need to update Office 2007 by Microsoft Update.

  EDIT: the problem with the "microsoft update" site has been fixed...

  -------------------------------------------

  something is wrong with the site "microsoft update"... I and many others, who are running either "windows xp" or "windows Server 2003", have experienced the same problem that you encounter with the site "microsoft update"... See this thread for a reference:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/77990b62-d97f-4648-815F-b021ddc07b5e/Windows-Update-for-Windows-Server-2003-will-not-load?Forum=winservergen

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• Why a shortcut for Microsoft Update doesn't appear in the start menu as it always has in previous installations?

  In this latest new installation of Windows XP Pro when I upgraded from Windows Update, Microsoft Update no item does appear in the start menu in previous installations? Can I remove Microsoft Update and then reinstall it? Can I manually install the shortcut? I'm comfortable editing the registry.

  Off topic, I know, but you can work some magic for another problem. When I boot, when half of the icons appear in the notification area, I get a message that Windows Firewall is disabled. After the last icons appear, the message disappears and the firewall turns on again. It's annoying, and I'd love to [repair]. Thank you.

  Assuming that the message "the Windows Firewall is disabled" comes from the Security Center (Windows), looks like you see what we call a "race condition". Essentially, Security Center is loading before the Windows Firewall was fully charged (may be due to the amount of NAV system resources then uses what he loads and runs his own control over the firewall).

  Until the warning goes away in a few minutes, don't worry, you see a normal behavior (for Windows XP).

• Why are all the drivers for systems dated only for 2006? microsoft updates?

  I noticed on all devices systems the only date of 2006 on most, why microsoft did not create new drivers updated now?
  owner of the frustrated computer!

  I noticed on all devices systems the only date of 2006 on most, why microsoft did not create new drivers updated now?
  owner of the frustrated computer!

  Hello

  Microsoft doesn't develop hardware drivers. All hardware drivers coming through Microsoft Updates are provided by the hardware peripheral manufacturers.

  When you install a device and go to Microsoft Updates for a driver, updates will look at the hardware ID of the device and will offer a latest driver from the manufacturer of this device.

  Concerning

• Why do we get microsoft updates and ITMU four or five days a week?

  My desktop computer is Linux cinnamon. I'm the only person who adds programs. I don't like really not with the fact that I get so downloads. From time to time should be sufficient. When I look at the updates on my computer I'm surprised to see huge amounts of windows updates.

  I thought it would be interesting to me gift with a windows 8 new laptop. 8 is easier than I thought I don't know if the downloads are necessary. If they are, I'll have to keep I guess.

  I can't erase the 'old'? Don't take a lot of space? Why do I need so much?

  Hello

  What is Windows Update?

  There is a simple and free way to help keep your PC safe and running smoothly. It's called Windows Update. All you have to do is to start, and you will get the latest security and other important to Microsoft automatically updated.

  Please see the following articles for more information on Windows Update:

  Windows Update

  http://Windows.Microsoft.com/en-in/Windows/help/Windows-Update

   

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update-FAQ

  Answering your questions about erase the installed old updates and the disk space occupied by these updates to Windows, if you clear the update installed that is causing vulnerabilities or performance related to that issue the program update and it depends on update to update how it will occupy the space of hard disk for example : the Service Pack installation takes over 2 to 4 GB of hard drive space.

  Windows updates are needed to cover other problems of performance and program or Windows flaws/security reasons. These updates are nothing but patches released from Microsoft to conceal these gaps.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Why my computer Windows XP keep appearing as a MacIntosh or other OS on the Microsoft Update site?

  Lately, whenever I try to connect using IE8 to Microsoft update to check the updates for my Windows XP system, I get a message saying that since I was a MAC OS, I should go the MAC Update site.
  I tried already to not launch the no version of IE8 add-on found in system tools and got the same results.

  This article should explain the problem-

  Windows Update page says "thank you for your interest to get updates of our site."
  http://www.Winhelponline.com/articles/35/1/
  TaurArian [MVP] 2005-2010 - Update Services

• Why did Microsoft Updates-ITMU. not to install with error 0x8007F0DA?

  When I checked history Microsoft Update on the Microsoft Update site, he had several updates that have failed to install with error code 0X8007F0DA.

  The KB includes an automatic Microsoft Fix it 50528 that corrects the problem.

  http://support.Microsoft.com/kb/822798>

  04/08 / 1104:04: 28 pm

• Why can't I install microsoft updates. get codes error 641, 80070641, 8004FF01

  I seem to be able to update the window but not microsoft.  Any help would be appreciated.

  Hi brownie8,

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  For reference:

  How to resolve problems connecting to Windows Update or Microsoft Update

• Cannot ping local interface after last criticism of microsoft update

  I just bought a Satellite Pro A200.
  When I upgraded to the latest critical updates from Microsoft Update, I found that I could ping is no longer my local IP address. This has happened to the card NETWORK LAN RJ45 and the wireless network card.
  I reinstalled the operating system using the recovery CD, and I could ping to the IP address of the local interfaces.
  But when I again once downloaded and installed the latest critical updates from Microsoft, I can't ping the local IP address.
  Anyone has any idea why?
  Thank you

  Hey Buddy,

  WHERE´s the problem? I know that the updates are the system destroy it when they are buggy, but that's normal with microsoft. I have almost the same problems also! Thhoughts WGAnotify.exe, I was a software pirate and restricted my access to 'zero' access.
  "Yes, Sir, I bought a windows and it s stolen... well... OK... :(."
  Yes, noone except microsoft (who would be the point where I could say "you are in the wrong forum" ;)) knows why it s happening.)
  These days, you should do the following: find update is the cause of this error. You can do this by going in "Add / Remove Programs" in your "Control Panel" and click on the top of the window the button "see the updates.
  Then begin to uninstall the last installed update and check if your ping works. Otherwise, proceed to the next update and uninstall it and so on...
  I know it's a long and boring process, but since there is NO problem of toshiba, you must accept it and try my method to remove the update that is causing your error.

  Welcome them

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?