Why is the addition of a movie menu stops burn me to DVD

Similar Questions

• Why does my windows Movie Maker stop burn to my dvd to 60percent without message

  Burning my family video with windows movie maker, from the (encoded) copy to dvd disc, and it stops at 60% completion with no error message.  How can I solve this problem.

  Thank you

  WE

  Just a few ideas...

  Large, complex projects are prone to problems.
  If you create several small projects and publish (Save)
  each format .wmv or .avi movie to a folder on
  your hard drive, you can then import the clips collected
  DVD Maker and each one becomes a scene
  (Chapter)... you can have up to 18 scenes.

  ===

  Your source files might have compatibility issues...

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  ===

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / Compatibility tab and disable all the
  filters / OK.

  ===

  Publication (save) the project to the DV - AVI or WMV
  film in Movie Maker format and then import the
  movie DVD Maker file may be worth a try.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• NO sound when the videos in Windows Movie maker are burned on a DVD

  Original title: Movie maker audio problem

  I just made my first movie maker windows movie with still photos and music. It has previewed perfectly but when I burned the DVD there is no audio on it. What's wrong?

  Hello

  A few quick thoughts on this:

  Have you tried your video playback to test after you created it? Also, if you were to test on a DVD player, check the disc on a PC first to see if it works.

  Also check if the audio track has been added to the timeline of the movie (video).

  Last but not least, experience using audio in a different format and recording your video in a different format.

  Please check the above before you write back to a disk.

• Please help try to copy the video in windows movie maker to burn to dvd

  First of all Hello, this is my first but I have read a lot of posts and tried to figure it out, but think I made things worse, I have a dell inspiron 15 something and a panasonic HDC-HS20, I had to reinstall windows and all pilots who, I think I did as when I put my camcorder software I began to have problems He says not to approve a 64-bit program and then it worked for a while then kept computer crashing then a black screen at start up and finally when I tried to burn videos to dvd, it says that I don't have a dvd player/burner, so I will now try to transfer my videos through Director of windows I downloaded everything it says that I need and it transfer files, but when I add them to movie maker it shoes a yellow triangle with a black exclamation point in each sinus and when I press on the bar moves along to play, but no images so im assuming that he does not, is it possible to do what I do, or I need to reinstall my software of camcorder and just hope that it recognizes my drive? any help would be appreciated.

  Thank you

  Sorry, I can't say I have now added my software that came with the camcorder, the software is called HD writer AE 1.0 and checked the compatibility of my product with microsoft and it says it's ok with a 64-bit, recharged even when software and when I click to create media that he says again in writing destination @cannot find accessible driver , so I looked through articles where dvd burner is not recognized by other programs, but he told me to go in accessories of control, performance etc. and do a right-click on the HKEY CURRENT user but it says nothing about the registry keys, it is said by default with a symbol beside him ab and under said data not defined

  Thank you

  =================================================
  The following Panasonic sheet for your camera model # HDC - HS20 States
  He records on SD/SDHC cards to the MPEG-4 AVC/h.264 format.

  Panasonic HDC-HS20
  http://Panasonic.NET/AVC/camcorder/HD/global/products/hdc-HS20/specifications.html

  Then... because Movie Maker is not compatible with this format... the best bet would be
  be to copy video content in a folder on your hard drive, convert it to a
  format Movie Maker is compatible with as WMV, then you can import into
  Movie Maker.

  The following links are not * the * solution... but can help to start.

  Movie Maker - import AVCHD files
  http://www.Papajohn.org/mm2-importing-video-AVCHD.html

  New camera with AVCHD not recognized by MovieMaker
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=231160

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why all the additional ads are added to the App updates?

  For IOS 9.3.1

  I also upgraded the application to the 'Dictionary of Meridian', and this update takes the screen with advertisements, as before.  Even at the point of a full page ad.  I would go back to the version back, but I can't?  It seems that all the App updates are not just improved to fix bugs?

  It would be a complaint directly with the supplier of app. But no, you can't downgrade to an earlier version. You may want to consider another approx. many dictionary are available.

• Why used the work of my Movie Clip 3D rotation tool?

  Im trying to use the tool rotation 3d for the first time. I have a picture, set as a (movieclip) symbol on its own layer. However, when I select the 3D rotation tool, it me does not change the clip. It shows me just the empty arrow.
  Could someone please shed some light on this? The only information I can find about this tool doesn't work does not correctly is if you try to manipulate an object that is NOT a clip.

  Thank you!

  Hi Sarah,.

  The screenshot shows that you have selected the 3D translation tool. Just press W to activate the 3D rotation tool (or click and hold on the Group of 3D for the suboptions tools and select the rotation tool). You should be able to use the 3D on this clip rotation after that. Let us know if there are any other questions.

  Kind regards

  Dharmendra.

• Why open system preferences for the additional hours of bad screen

  Why the preferences system not open to the main screen. When I click on it and open the system preferences, it goes directly to the security and privacy, every time. It still works perfectly well. I can always click on the upper left button to return to the main screen. It is really annoying that he began to do this.

  I started doing after that I had to change some of the parameters for sharing so that I can get remote access to the work of this Macbook Air to my iMac at home when they are on separate networks.

  Im not sure what triggered the system preferences to do this, but the only reason why I ever went to this screen was to check some settings of the firewall. I don't change not even nothing in there, nor I have stayed there when I closed the system preferences. Nevertheless, I know has this annoying problem.

  < image edited by host to remove the serial number >

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Preferences/com.apple.systempreferences.plist

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the office, leaving the window open. Restart the application and test. If there is no change, leave again and place the item you back where he was, crushing the that may have been created in its place. If not, remove the item you moved.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• In first items 14 scene selection from the Menu movie (Motion, holiday, Christmas frame) does not bind the scene 6 main Menu page. It places the scene 6 2 Menu scenes, but unrelated to the other, the main or scene selection Menu. What it

  How can I edit a movie Menu template? I use a Motion - celebrations and events - model of menu for Christmas related to 6 scene markers. Five scenes are represented by a thumbnail and name on 1 Menu scenes that appears when the button on the main menu page scene selection is reached. However, the scene 6, which has also a sticker and marker corresponding scene, is on another page (Menu 2 scenes) that does not link to the home page (does not appear in the scene selection Menu that has just 5 thumbnails and an arrow to return to the main Menu). In the area of work under the clip monitor Main Menu 1, Menu 1 and Menu 2 of scene scene appear together and by clicking on the thumbnail in the scene 2 menu the link to the clip 6 works except when Preview Disc is played, in which case the Menu 2 scene disappears. The scene marker is correctly linked, it just does not appear in the menus of the finish. The first five items of the Assembly (related to the scene selection menu) are all the video clips, but the 6th clip is a slide show. I read several threads on menus but found no mention that a slide show scene marker is treated differently by a menu template. Is it? The 5 first clips are all in the format AVI - DV with imported project files previously saved in this format, so that they could be related and engraved on a DVD. The slideshow is imported from PSE14 and 6 attached clips have already been burned successfully on disk (without menu) as a try-out. However, I was not satisfied with the resolution, then saved individually at the only other resolution DVD - SD576. Now I'm stuck at getting this sort menu. I operate 10 WIN. Any help will be accepted with gratitude.

  Hi, thanks for your response. I can rephrase the question very easily: why I've been so stupid? My problem was that I couldn't see a link in the menu between the Menu scenes 2 template and the main Menu. It turns out that the link was there all the time (a sideway arrow just above the main Menu link) but I thought he was part of the link from the main Menu and never clicked on it. When I burned my project to a disc and played on television, the sideway arrow was a different color and, of course, another link... the link I was looking for. Then, my apologies, problem solved, lesson learned - click on everything you see. Thank you. And I was very happy since the upgrade to 14 before except when it makes me feel stupid, which is frequently.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Why the addition of a reference to the rescue mailbox is inactive?

  Why the addition of a reference to the rescue mailbox is inactive? How to add boxes to the letters of relief to reset your question secret?

  What do you mean by "add a reference to the rescue mailbox is inactive"?

  You should be able to add an alternate email address to your account by answering your security questions: on your Apple ID - Apple Support email addresses

  Who does not?

  If you mean that you forgot your answers to your questions and you need to reset the and do not already have a verified backup on your account e-mail address, then you will need to contact the Support of your country for the reset of questions: Contact Apple for assistance with the security of the Apple ID accounts

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then add an alternate e-mail address (and verify) for possible future use

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc in WIN7

  Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc running WIN7. The hand icon appears, but the selection disappears. reappear when the version of the space bar

  This is a normal behavior. You need not use the space bar to move a selection.  Just have the chosen selection tools and have the cursor within the selected area.  Then just left-click and drag.

• Why can't nest folders or move documents into folders as soon as they are in iCloud?  What is the thing that escapes me?

  Once a document is in the iCoud pages or vice versa I can't embed the existing folders or move documents into new folders.  tried in iCloud.com & pages and numbers on my mac?  is there a trick like pressing the command key, Miss me him.  sought help, but can't find it.  I initially move individually the documents but I now want to clean space iCloud.  nothing to do except download all, reorganize and then download files rather than documents?  Thanks for any ideas

  Use the Finder on Mac. Drag and drop. Copy and paste. Your choice. The changes will be synchronized to iCloud by car.

  iCloud.com has a limited feature set largely. It of a convenience thing and does all the file management features in iCloud drive.

• Movie menu, the audio duration

  I finished my last DVD project and I have my menu selected film, I would like to extend my audio clip. However when I try to do it keeps returning to the setting 29; 29. so my question is - this I can change this duration?

  Thank you

  AZ Aurora

  Good to know of your progress.

  You cannot increase the 30 seconds a disc menu loop beyond this limit max.

  You can change the point, nevertheless maximum 30 seconds loop.

  RTA

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.