Satellite Pro A10 fails to start - IDE #0 ERROR

Similar Questions

• Satellite Pro A10 does not start (HARD drive seems to be missing)

  Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
  Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
  is - that say I have:
  1 a hard drive damaged
  2. defective connections on the HARD drive? -If Yes, how I fix that?

  the system didn't crash before it happened, she doesn't have to load up when I started it.
  Would appreciate any help.

  Thank you
  SCL

  Hello

  Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
  If it possible s so I suggest you of to completely format the HARD drive.
  Then try to start the recovery procedure.

  However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop

• Satellite Pro A10 does not start - no hard drive

  MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
  WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
  CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
  DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

  Hello

  HARD drive is visible in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty.
  Try to replace the HDD with a compatible and try again.

  Good luck

• Satellite Pro A10 - no answer - enter HDD #0 error

  Pro warranty A10, student daughter portable computer reports no longer works, already suspended and finally no response from any other lights at the entrance to DC charger is connected.

  Clean fan/radiator, a lot of lint etc. removed. No obvious signs to know why the Board me dead however. Confirmed with counters that this DC of the shipper in me Board. Ordered A replacement me Board, FHZSY1, eBay and equipped, taking the precautions of static, but can not confirm that they were done by the seller.
  Now, new Board of Directors recognizes the input DC and recharged the battery OK. Tried to turn on the laptop but terrible mistake INPUT #0. Concluded that the HARD drive had also been damaged. New (Toshiba box) arrived two days later but gave the same error when mounted. BIOS won't recognize HARD at all. Tried all the messages on the verification of the connections and certainly not of mounted riders. Laptop will continue to start from a system CD, as it may then think the new me Board is OK

  Are the HARD drive of the Satellite Pro A10 different from those on the A10 satellite earlier?
  Any other ideas on this INPUT #0 error?
  Thank you

  Hello

  As much as I know there is no different hard disks and your use of the same laptop as most other Toshiba laptops. I can just write that this error is certainly resulting HARD disk problem. The HARD drive is obviously not identified by BIOS correctly.

  Sorry but I have no more info on this subject. By the way: is the motherboard new or used one?

• Satellite Pro A200 failed to start

  Hi guys,.

  Need for emergency assistance.
  Computer laptop Satellite Pro A200 tension regarding the Toshiba password logon, then the cursor freezes the upper left corner, it won't get into F8 configurations.
  This unit is 3 months old Satellite Pro A200 XP Pro.

  Used cell phone Sunday noon and set a system restore before installing a few applications. I can get to the Bios.
  I also used the disc of recovery as a last resort. I'm on vacation a week today and if all goes well with the laptop.

  deejaydee

  You said you used the recovery CD? Well, I guess that you were not able to boot from them. Or I m wrong?

  Usually, you should try to boot from the CD bootable recovery CD, Win XP/Vista CD or CD of Linux. This could allows to check if a hardware problem exists.

  If you want to boot from the CD, I would recommend pressing the C key immediately after starting the laptop. This should allow booting from the CD/DVD drive.
  However, you can also try the F12 key. This allows the Boot Manager where you could choose the STRANGE.

  Good bye

• Satellite Pro A10 does not start

  Hello

  My laptop died this morning. When I press the POWER ON button, the power light is on, but nothing else happens. The screen is dark and I can't hear the fan running.

  Please can someone help?

  Hello

  The first step that I can recommend is to remove the battery for a short period and try to restart the device. It will be interesting to know if there is a possibility to enter the BIOS settings (use the ESC key at startup).

• Satellite Pro A40: Lost CD-Rom - ide #1 error on initialize to top

  I lost the use of my cd-rom suddenely and can no longer play cd/DVD.

  It is not recognized in the 'my computer' screen either and when I went to "run" and looked in the MSINFO32 - cd it shows no drivers.
  Also showing an error ide #1 in trunk = upward.

  Y at - it a fix for what someone knows it please?

  Hello

  What is the BIOS? BIOS recognizes the installed CD/DVD drive?
  Generally, the CD/DVD drive is connected to the #1 IDE controller. If the drive cannot be recognized by the BIOS the #1 ide error.

  Maybe it s not a serious fault and just a touch loose?  :|
  Try to remove the CD/DVD from the laptop drive and start the laptop without WEIRD. Then stop, reinsert the STRANGE and access the BIOS to see if the STRANGE has been recognized correctly!

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Satellite Pro A10 - IDE 1 # error at startup to the top

  HI, I have a Satellite pro A10 and everything is working very well in recent years to date.
  A few days ago I started having a cd read error / invalid dvd disc format still drives fine on all the other PCs work.

  Today as I get #1 error on boot up IDE... the laptop is always standard when I got off the shelf. thinking the drive might be dead due to wear I replaced the drive with a drive to work and I still get the same error. I removed the completely STRANGE and yet to come.

  I also updated the usb floppy bios that has been a success. and the best part of all this. the dvd - rom supplied with the laptop works fine in my other a10 tosh!

  Someone at - it ideas. I really need to replace the motherboard if I can help it. This is the only problem with the laptop.

  THX in advance people.

  Hello James

  IDE 1 # error is typical when ODD is not accepted by the system. The reason may be defective drive or the use of non-compliant readers. The fact is that each player can not be used with all portable models because of the allocation of the different pins.

  In your case, it is really strange that the work by car on other A10 but not on this one. Because of this, I presume that there may be a problem with connectors. I'm afraid there is not much to do. You can try to check out them and see if they are clean and not oxidized.

  Sorry, but we cannot speculate what may be the problem but, as you know, only intensive test may give you more answers.

  Good luck and let us know if you will find what is the problem of resources.

• SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10

  Hello
  I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".

  NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.

  Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?

  Thanks in advance for any advice you can give.

  Best regards
  Angus

  > I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  Lol :D I have don t wonder you get the IDE #1 error message.
  As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware?  :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.

  > Update the bios to the latest version would help
  The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.

  > or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
  I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD players

  I recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope

• Can not start my Satellite Pro A10

  I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

  Start:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last known good configuration
  etc.

  None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

  multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

  I can't clear the checkpoint.

  Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

  Any suggestions?

  See you soon

  HI Leon,

  It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
  A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

  The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

  Kind regards

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• IDE #1 error on Satellite Pro A10

  Hi, my laptop Satellite Pro A10 displays IDE #1 error whenever I try to put it on. This message is all I get, even if it is shown for a short period of time - the laptop always comes back to this message, it tries to load blanbk of the screen just go and then this message appears every time! I was wondering if someone could explain what this means and how can I solve this problem?

  Thank you

  David

  Hello David

  This error occurs if there is a problem with the CD/DVD drive. For example, this error occurs if you try to use the incompatible reader. It will be interesting to see what happens if the drive is removed.

  You did any player upgrade?

• Satellite Pro A10 stops on specific opportunities

  Hello!

  I am owner of a satellite Pro A10 (PSA15E). It's hard drive stop working, the pc could not find. So I bought a new, a samsung with 160 GB, IDE, of course.

  Now when I was installing windows, in the part file copy, it just stopped. When I boot it says initialization file fails, then I guess it stops when it was to transfer this important part.

  If I run the cd again, it does not format or reinstall/repair request, it loads only some files and try to start windows and then stops.

  Now, this is where the tricky part comes in: the power led in turn, then again very fast when it stops. I do not use the battery (it is already dead too), and I use an universal AC, a give, 70W adapter. I tried formatting via a LiveCD Ubuntu, with no luck, because when I choose "Try Ubuntu" or "Install Ubuntu" it stops a little as he thought, and then when he is about to leave the menu and do something, it stops in place.

  My only guess, is that this laptop doesn't want me more :(

  I could really use some help, I just spent some 50 on a HARD drive for him and he is the only laptop that I have. I don't think that it is a question of temperature because it stops just at specific times, on some specific choices. If I just let it hang there in the menu (the Ubuntu live CD one) it is not closed. Only when I want him to go further.

  Any help/response is greatly appreciated, and if I take a little too much time to respond is because I don't have access to internet at work now.

  Thank you very much
  Ricardo Rebelo

  Hello

  Theoretically, this could be an overheating problem as Akuma wrote. Therefore, you must clean your laptop using a jet of compressed air. This could blow the dust from the cooling fans and can improve the cooling of the laptop.

  In addition, it would be interesting to know what happens if you run Toshiba Recovery disk recovery facility this work?