Why is the snmp Server user must be added to the configuration

Similar Questions

• Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  I have a setting wrong?
  I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...
  Any help would be much appreciated.

  Hi Richard,

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Impossible to logon to share the folder with "User must change password at the next logon" in Windows Server 2003

  I use Windows Server 2003 R2 SP2 as a file server.  I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user.  I then share an output folder.  User 'A' is using Windows XP SP3 to connect to this shared folder.  However, when I try to connect, Windows reappear to enter user name and password.  I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all.  Correct me if I heard wrong.

  If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.

  If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  You will need to repost the above Server forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  I googled a lot and could not find anything on Windows 7 SP 3. As far as I know it's only SP 1.

  My AD will work?

  There is only one service pack for Windows 7. W7 SP1 works perfectly.  (There is a service pack 3 for Windows XP. Perhaps it is the mentioned minimum version.)

• Error when connecting with the new announcement of account in windows 8 client as "User must change password at the next logon"

  Windows Server 2003 R2 Standard Server
  Client-side: Windows 8

  The problem:

  I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.

  At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.

  Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.

  Jaril

  Hi Jaril,

  Thanks for posting your query in Microsoft Community.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder?

  For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder? Let's say that I was updating a banner of right or a library style...

  If you change the .zip offline banner or a library style that is part of a .zip file that you specify in DPS App Builder, then Yes, you must change the app and make it available for users to update. But if you change the style of banner or library that is hosted on a server, the changes appear immediately without any modification to the application.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• in the case of backup files, are both users of saved files, or files for each user must be backed up separately?

  original title: backup of files

  My wife and I use the same computer, but have different usernames (accounts).  My question is: when a backup occurs files, two files users are saved, or files for each user must be backed up separately?

  Hi toad133,

  ·         What type of backup that you talk too much?

  If you are referring to the automatic backup there backup everything that you have selected or defined to be backed up.

  If you are referring to the manual backup backs up what settings or files that you select to backup such as emails or files.

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Behavior of the expected multiple SNMP server host?

  Hi all

  I'm working on a network by which our client has a SNMP existing system on the control switches.

  I add our own SNMP device to the environment, but I want to make sure it does not replace or remove their existing configuration.

  My thoughts are, that if I enable snmp-server host x.x.x.x communitystring

  Will it overwrite their existing snmp server host configuration

  Can anyone confirm this? Especially for 3750's and 2960 x. #.

  Thank you

  Nick

  Hi, no it will not overwrite the existing configuration of snmp.

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• When I create the domain user, I used option user must change when you first connect, but am unble to get this

  When I create the domain user, I used option user must change at the first logon, but am unble to get it.

  Hi RadhamAravind,

  Thanks for posting in the Microsoft Community.

  As you create a domain user, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?

• Error occurred in retrieving the provided user bindDN.The user must have attribute/s firstName, lastName, email BindDN.

  When I go through the wizard and setting to the top of my base and bind DN, I get the following error. What Miss me? Error saving configuration of the directory. Error occurred in retrieving the provided user bindDN.The user must have attribute/s firstName, lastName, email BindDN.

  The usename you use AD administrator (IE CN = admin) must have the required attributes with non-empty values - firstName, lastName, email.

  When HW connect to AD with bindDN he added that makes the system user who applies the required properties.

  These properties are required for each user that needs to be added/synchronized to the workspace of horizon.

  To correct this error, you must go to AD and adds these admin user attributes.

• AD provisioning - password never expires and user must chg pwd at the next opening

  Hi all
  
  When I have the Constitution currently default AD, these are defined
  
  password does not expire - true
  The user must change the pwd to the next opening - false.
  
  The requirement for us is that the password should expire and that users should change their password at the next logon. I tried to change the default values of the form and try but it didn't work. I don't think it's necessary, but I need to create a new version for this?
  
  Can someone point out if I'm missing something?
  
  Thank you
  M

  OK Ok

  Go to the forms designer > form UD_ADUSER

  The default value for the password never expires 0 and user must change the pwd to the next opening 1

  There will be a default value column u will see in the table.

• Why was the Windows 7 Home Premium (re) installation disc not bundled with my laptop?

  Hello world.

  I love my y560 Ideapad, it was working perfect for the first day I got it.

  I'm just a little bit concerned if, why Windows 7 reinstall drive does not appear? The key series sticker is of course still on the bottom of my laptop, so I know it's (almost) legitimate, although I don't know what to do if something bad irreparably took place in some important operating system files. Users must download Windows 7 from a network of torrent?

  Hey tgp.

  Unfortunately, they do not group the disks more. You will see a OneKey recovery on the portable utility that allows you to make your own recovery DVDs.

  -Tell the truth, the units are activated by a corporate license system. The key on the bottom of the laptop is to serve as a proof of purchase, but the Windows 7 license for the software on your laptop probably does not match it.

  In other words, you won't need the lower button with the recovery discs. If "offering you" your own discs (in my case, retail drives), use one on the bottom.