Why is the sound so low while streaming video on Apple TV

Similar Questions

• Why are the sounds on my iPad so low

  My sound on my iPad text used to be good... now I can barely hear it.  How to fix this, please?

  Hello. Check the volume, of course. And also the volume in the settings > sounds. It can affect the text too. Make sure that the sound is not cut by the switch at the side or the control center (now on two pages).

• Satellite A100-454: I think that the sound is low

  I think that the general volume of the A100-454 is too low, any suggestions? Is this a driver problem or I have to config something?

  Thank you.

  Hello

  This may not be a driver problem audio because if the sound see sound card device has been recognized, and the audio driver has been properly installed.
  Vista is installed on this laptop?

  In the control panel in the sound options, you will find various sound controls.
  You should check if all controls are set to the next level

  If everything is set max I guess that the sound has been set up. possible level.
  In this case it is not things to do

• The sound is low

  the sound on my computer is very low, even if I shot everything to the top

  It's a Hewett Packard computer with Windows Vista

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Why spoil the sound?

  I paid for the windows 7 upgrade and had to pay to downgrade from vista.  The sound is horrible.  I have to monitor the realtime sound that I am a court reporter and WIN 7 has changed so there's a 2 or 3 seconds of DELAY in recording the sound as to what is happening in real time.  It is therefore impossible for me to use my upgrade to windows 7.

  Microsoft, why you mess with the sound?  How can I left MS know that they made a big Boo-Boo and IS there DIFFICULTY?  It cost me a lot of money.

  I answer in 2013 because I think that the latency problem caused by the use of usb microphones.  If I plug directly on my computer I have more the latency problem.  Or maybe a MS update solved the problem.

• Stream video to Apple TV and listen to music at the same time iMac

  Can I stream media (audio + video) for Apple TV and listen to music on my iMac at the same time? (While my TV and my iMac will play two different audio streams).

  For example, my parents would watch a movie of my iMac on their TV HARD drive (connected Apple TV via HDMI) while I work (or music) on my iMac.

  AppleTV can receive mirror airplay and can access a shared iTunes lib

  If you mirror the iMac to the appletv airplay it good mirror mac and not you won't be able to listen to or do something else as it would have mirrored to the appeltv too

  If you of the appletv access shared lib iTunes mac is free to be used for other things at the same time sharing iTunes lib works in the same way if it is the appletv that access or if it's another ios device or another computer

  You can read more

  https://www.Apple.com/support/iTunes/sharing/

  Use AirPlay to stream content from your iPhone, iPad or iPod touch - Apple Support Wireless

• I've never had trouble with the sound level before, but a video of a conference that I view, is barely audible. I think it's my computer/speakers-how can I check this? Leprosy S

  Help make the sound on my computer (and its speakers) stronger?        I've never had this problem before, and I am listening to a teacher talks about a video and it is almost inaudible.

  Susan

  Hi Susan,.

  To provide the proper resolution, I would need more information on your side.

  The problem is specific to this particular video?

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  Method 1:
  We will first perform this troubleshooting and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically
  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:
  If the problem persists I suggest you try the procedure described in the article and see if it helps.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  See the article for more information.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Lost the sound to all of my videos.  How to transform the sound?

  I can't get the sound to play back on my videos.  I was adding narration to a clip when I read the narrative the full program has lost sound on videos.  Is there a market move for this?

  Ron

  Ron

  Important, particularly for this question... what version of Premiere Elements are you using and on what operating system is running?

  I'll take a guess that this is the first items 12/12.1. Let's see if I guessed correctly.

  There is a known issue with the first 12/12.1 elements in which the sound on the Audio tracks numbered and Soundtrack is lost when the narration of

  the Narration first items 12/12.1 tool is added to the project. A fix has been described by Llamadude99. Please read the following for more information about the fix for Llamadude99 as well as the modification of it by others who also worked.

  First Elements ATR troubleshooting: ss12: Audio dropouts after addition of Narration

  Please see, examine and then let us know if the above worked for you.

  Thank you.

  RTA

• Why is the sound plays not after I export flash video?

  I have my audio file on the timeline, but after I export as a video audio is not playing. Help please

  I used Flash Pro as a tool, where all I wanted was the audio from the video export, and that worked fine audio mixer. I'm not positive about knowing if I use event or stream audio in the timeline panel. Try to use the event.

• Lagg while streaming video

  Hi guys,.
  my video plays really lag then I play my laptop, but if I use it for my ipad is not... so it means there is sumthing wrong with my browsers or sumthing. can you guys tell me the solution for this please?

  Hello Kakarot:

  Here's how to reset Google Crome return to default settings. It's on this page to half way down. Title of article is: clean up your settings to divert. http://chrome.blogspot.com/   Once you down loaded Firefox and then Google Crome reset to the default settings. You still have the game slow return. Then, you will need to contact your Internet service provider and get Highspeed Internet speed. That's what I mean by difference between Ipod and computers, Ipods use a different use Internet speed. 100Mbs or higher for Internet speeds I use Time Warner Cable my routers pass through the cable line. That pass through the telephone lines are much slower and harder to stay connected. Time Warner costs a little more, but for me it without constraint and a lot of speed just with basic TV and regular high-speed DMMX. If I want the same supper high speed I can always up to the grade. I don't know what is available in your erea. Here in Maine Time Warner is the best choice among the three other companies that are in my erea. frrw.

  We have done all that is related to your computer. So it is your Internet speed is the question.

• can I stream videos to apple tv mac air 4?

  I'm unable to air apple tv mac streaming, only capable of mirroring of the computer.  also the difficulty streaming of youtube to tv as well.  If frustrating.  Someone please help

  Basic AirPlay broadcasts the original Apple TV for her to decode file, it is usually preferred for mirroring because it can be buffered and is not "live", as mirroring is. The downside is that the Apple TV must be able to decode the files you send, you are sure that they are a compatible format.

• The use of sound in Flash. Why the sound stay synchronized when I publish?

  I worked with the sound for a while trying to get it right to put it on YouTube. I finally got that sound worked in Flash. When I export to video I liquidate the lack of synchronization with sound. It does no londer faithful to the Flash program. Does anyone have a useful understanding?

  It is possible to use ActionScript, but unless it is really necessary with your workflow, since you already know how this method works, I recommend sticking with the applicant in the timeline but then check your sound properties in the properties panel, and switch between the different options (I think there are 3 options) to see which gives you the most accurate result.  An event, a flow, and I do not remember one 3rd.  You will also want to go into the settings of your SWF publish and choose appropriate or any export options that called for sound.  There are 2 fields that are stacked on each other and you must set the properties in addition to the default value, if your default settings do not work for you.

  Let us know how make you out with these changes.

• Why do I get the "error: no valid source could be found" message when you try to stream video live?

  I'm trying to stream live TV and this message - "error: no valid source could be found" I am on Fox Business website and the message appears in the Fox Business Watch box at the bottom right of the page. I use a MAC with the latest OS. I have another MAC at home and I am able to access streaming content. I can also access the content using Chrome.

  Apparently the old MAC that can stream video has Flash. The new MAC Mini did not have it and I didn't because of the negative things I've heard. Unfortunately, I need on the new computer and downloaded it reluctantly. Problem solved. Thanks for your reply.

• THE PRESIDENT GOT LOWER

  Dear Sir

  I had problem with my laptop (inspiron 5521) speakers and he sent to dell support center and they installed new speaker but I discovered that the sound is lower than it used to be confronted with the problem. also when I used to use to connect the headset a massage appeared on the screen now it doesn't. is this hardware or software problem?

  Thank you.

  Hi ABNALI,

  Please update the BIOS and the audio driver by using the link below.

  http://Dell.to/13EVLww

  In this link punch in the service tag of the system or express service code, under the BIOS category, select the latest version of the BIOS and install it in the system. In the audio category, select the latest audio driver and install it in the system.

  Plug the power adapter by updating the BIOS and not to use the system until it restarts after the update.

  Also let me know on the message when you connect the headphones, if you remember. Is the merging of helmet normally?

  Let me know the status.

• Adjustment of the sound volume

  If you have some code like

  sound(1). play ()Member()'Whatever')) and

  Sound (2). Play (Member ("Whatever2"))

  Is there anyway to adjust the sound volume here while one is stronger than the other?

  Thank you!

  You can adjust the volume of the any of the audio channels where 0 is silent, and 255 max:

  Sound (1) .volume = 100