Why is trimmed after added to the calendar (CS 5.5)

Similar Questions

• Why past events are removed from the calendar

  Why past events are removed from the calendar?

  Klassical,

  Check the settings > Mail, Contacts, calendars > calendars > synchronization > select your condition for the retention of the event.

  

• ButtonField is not visible in the Simulator after adding to the HorizontalFieldManager?

  Hi iam trying to view an EditField and and a 'go' button beside it in the same line.  So I added them to horizontal FieldManager but in sumulatro only the search is coming and button is not visible.  If I add the button to directly _mainscreen that it is displayed in the following line. So, how do I make visible button after adding to the HorizontalFieldManager?

  Please give your support. Thanks in advance.

  private BrowserFieldDemo()
  {
  EditField edit = new EditField("", "search",10, EditField.FILTER_DEFAULT);
  HorizontalFieldManager searchBar = new HorizontalFieldManager();
  searchBar.add(edit);
  searchBar.add(buttonField);
  _mainScreen.add(searchBar);
  pushScreen(_mainScreen);
  }
  

  

  You can also limit the size of your EditField to leave room for your BitmapField.  In theory, you need only substitute getPreferredWidth() for your EditField, but you may have to substitute layout() as well.

  You can see an example of the fact of a ButtonField in this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=7430

  You can also find this useful Thread If you want to go in the direction of Manager:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3745

  I found the code snippet according to who uses the layout to make sure you have 20 pixels to the right of the field:

  Protected Sub layout (int maxWidth, maxHeight int) {}
  Super.Layout (Display.getWidth () - 20, this.getHeight ());
  setExtent (Display.getWidth () - 20, this.getHeight ());
  }

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Unit testing: why white spaces are added to the PL/SQL lines on each edition?

  Dear team of SQL Developer,

  Are you aware of this very annoying problem of the unit test is running: a space is added to each line of PL/SQL code with each unit test that is run?

  The length of each line of code continues to grow with each race...

  I wonder why is it and you have an existing reference to bug for this... Please let me know...

  Thank you

  Val

  Thank you, Gary!

  The bug was just connected:

  BUG 20061594 - UNIT TESTS: the UNWANTED SPACE CHARACTERS ADDED to THE SQL CODE

  I've updated the SR that white spaces are added after each change, and that it can be easily mistaken for each run (we open the editor for see/check, or simply to do an update before a new race), but the bug has already been created with a description of the problem of evil:

  "...

  Description of the problem

  ===================

  Spaces are added after each line of SQL in the Unit Test after each race. »

  Sorry about that... I hope that the bug will be updated with correct description before you guys accept it as a bug:

  "...

  Description of the problem

  ===================

  Spaces are added after each line of SQL in the Unit Test after each change. »

  Thanks again,

  Val

• Firefox blocks popups online even quickbooks after adding to the allowed list

  After the recent update of quickbooks online when using certain functions, a popup is apparently blocked by Firefox and I get a message from qb saying: ' uh - oh. " Please unblock us. We use pop-ups for things like adding new clients, showing alerts and more. It's simple. Here's what to do:
  Click Options or preferences in the top right of your browser.
  Select Allow pop ups for qbo.intuit.com. in fact, the blocked site address is lvdc.qbo.intuit.com. I have also that added to the allow list. The continuous pop-up windows to be blocked and this annoying message will not go away unless I close completely, re - open and perform tasks that have no customers. As soon an I need to do a task with a client, messages window pop-up demon reappear.

  The point is that Firefox stops pop up display after this limit of 20 has been reached. You can try to increase this maximum to a higher value and the pref dom.popup_maximum value of 100 or more (don't go too high) to see if it makes the popups reappear.

• Following SQL plan bad even after adding to the base at 11 GR 2

  11.2.0.3, RHEL 6, 2 node RAC

  I have a request app with 4 shots, and one of them is very well optimized plan. But a few reasons it was not used. I added this sql_id based yesterday.

  {code}

  sql_id: 38w0gp7u4vab

  plan_hash_values - cost

  (1) 1483922261-284

  (2) 1549540093-354

  3-11-3581836057

  4-3875671801-347

  (5) 3584469669-450

  Here's the info from baslines:

  PLAN_NAME cost VAC

  ------------------------------ ------------------

  SQL_PLAN_9m9pwxh4mpy73018854c3 11 YES

  SQL_PLAN_9m9pwxh4mpy7334ba5abc YES 463

  SQL_PLAN_9m9pwxh4mpy733a0debdd No. 118

  SQL_PLAN_9m9pwxh4mpy73962cb03c YES 364

  {code}

  I see 3 plans are marked as "ACCEPTED" and a plan is not yet.  I hope that it must follow the plan at a lower cost.

  Question:

  ========

  When I check the execution plan for the sql_id always according to plan with cost (463) above.  I wish she must use a first with the lowest cost (11), but don't know why it's always the plan suite with higher cost.

  Any idea on why this is the plan bad sequel yet, we have added to the sql database?

  Thank you

  Harry

  The optimizer is free to choose any plan accepted. You can use dbms_spm.alter_sql_plan_baseline to turn off the plans that you don ' t like.

• Remove the Configuration after adding to the models?

  Hello

  I wore as a result of the market-

  1. using the base OS say win2k3 model I've deployed a new configuration (full Clone)

  2. I installed my software and other things on the deployment configuration, and then I want to use this Configuration of my Gold, so I added this to the models.

  3. now after adding (2) for models can I delete above configuration? Which will cause no problem in my model that was created in step 2?

  Kind regards

  esxvmuser

  You can remove anything in LM without worrying from clones of this element.  On the backend, Lab Manager removes only the files that have no dependencies.  So the deletion of your configuration will remove LM but not ruin your model because the files of this model depends on are not removed until all dependencies are removed.

  Dependence of follow-up and asynchronous operation garbage collection nodes are important elements of the LM system.

• flash_portfolio_300x250.js? 1465837255984 why these numbers are added at the end of my js file?

  So I have a javascript file named "flash_portfolio_300x250.js", but inside my index of the referencing file ' flash_portfolio_300x250.js? 1465837255984 '. so I have a client trying to download this on google display network and they get an error message and are far from happy at the moment. I didn't know they used the google display network so I had no idea what it was. Once I discovered they were using it I ran my files through their validator and found the question

  < script src = "flash_portfolio_300x250.js? 1465837255984" > < / script >

  I do not have a file named that. the name of the file is the following

  < script src = "flash_portfolio_300x250.js" > < / script >

  Once I got rid of those numbers at the end of the name of the file the validator came back as good.

  Anyone know why its adding this?

  This apear in random numbers when you test applications. They apear to prevent caching of the browser. It is better to publish and test the published file.

• Random photos still added to the calendar go black?

  Some of my photos from iPhoto added to FCPX timeline go black.  I searched and there mention there of wireframe the cause but I don't think that's the problem.  Any help much appreciated.  Thank you

  Mode of WWireframe refers to the FCP legacy, to more than five years. What are the specifications of media, format, size? How many images are you talking about? How much RAM and VRAM you have?

• Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

  Are the settings and policies of an ASA local with shattered fire or power of substitution to the addition of the device that will be managed by the management center of FireSIGHT? I have an ASA that works stand-alone with FP and now need to add FireSIGHT Defense Center/Management Center without losing existing policies.

  Thank you.

  Simply adding as successful will not overwrite the local policies of the firepower of the ASA module gave.

  However, as soon as you deploy any policy (access control, Intrusion, file), healthcare etc. Since FireSIGHT Management Center it will overwrite the one on the SAA.

  You can export one local by using the ASDM Manager and then import it into FireSIGHT for re-deployment as a management centrallly policy.

• Video is not slow when it is added to the calendar of different cadence

  I have trouble understanding what is happening here.  I have a video shot in 59,94 images per second, and add it to a sequence, which is set to 29.97 FPS.  He rereads normally makes sense, if the first is down to 1/2 frames, but indicator target image says that is not drop frames.  The clip also runs the same length.  The cadence to interpret for the clip in the project window says 59,94 frames per second, so if it is added to a sequence, which is set to 29.97 FPS and there is NOT a drop frames, shouldn't it be slowed down?

  PP works as expected.  Yes, it's to show you all the other images, but the indicator dropped frame one shows that if he does not play back to the proper sequence of cadence.

  If you want to slow down, actually change the settings Interpret something less that's the native frame rate.

• Problem with moving of the objects after adding to the stadium

  Hello
  I am a student using a version of educational license of Flash MX, obtained through my University, as a prototyping tool. Everything has been fine until last night, when I learned that I couldn't anything reposition on the stage. I am something of a novice with Flash Mx and have been unable to find out what is the cause of the problem. I think I inadvertently used a combination of control keys to change a particular setting. The problem manifests itself first when I added a combo box from the components Panel to the stage and it is located in the upper left corner and refused to be moved!
  Any ideas gratefully accepted.
  

  This problem has been resolved.

• Why not run Windows Defender analyzes the calendar?

  I set schedule to run Windows Defender scan at 18:00 on money under standard user account, but I find that there is no digital activity Records.

  Anyone have any suggestions on what evil is?
  Thanks in advance for your suggestions

  Hello Oem,

  Thank you for your response.

  Only security software can run on your computer at a time. Having more than one security software installed at a time and keeping the two race can cause conflicts between them, which can lead to many problems of Windows.

  If you want Windows Defender to run, you must keep one-third of security software disabled. As soon as you turn on the Defender third-party security software Windows by default is disabled automatically.

  Hope that answers your question. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Two days of vacation after syncing with Google Calendar

  Have a new issue to me. Was trying to find a way to add US holidays and seemed formidable via wise webOS. A Google account was added to the TouchPad.

  Found a way to add public holidays to Google Calendar, so that applied the first.
  

  Then synchronize with the TouchPad Google Calendar... and ended up with two days of holiday. Wanted to know what day that the party was on, not having to guess between two different days! /GRR
  

  Now in order to show that in fact there no vacation were included, in order to answer the question that would probably follow... I disabled the holiday that has been added to the calendar calendar Google to show that they have not exist wihtout it.
  

  "Seems fine, the issue cleared up after the holidays to Google calendar calendar, then applying one of the Browse interesting calendars ' again.

  Synchronized the TouchPad twice before she showed the new calendar, and then there was a lag before the holidays have been applied.
  Now displays as does my Google Calendar.