Firefox blocks popups online even quickbooks after adding to the allowed list

Similar Questions

• I have Avira version 14 and Firefox deleted/added to the allowed sites but still does not!

  When I run Firefox it just barattes away and expires. Sometimes, if I just leave, after ten/twenty minutes he'll run v, v slowly. I uninstalled and installed Firefox. I have the latest version of Avira [14] and deleted Firefox and added to the allowed applications, still no joy. You write from a different browser. Also if I close Firefox and then try to restart I get the Firefox is running... Now becomes seriously annoying. I can only assume that Firefox is not quite up-to-date with the version of Avira. The other browser will run without problem.

  In the end, I uninstalled Avira, restarted; downloaded and run registry cleaner, delete all keys, restarted; Finally reinstalled Avira, has completed the installation, etc, and now Firefox works a trea. Hated by using IE, yuk!

• ButtonField is not visible in the Simulator after adding to the HorizontalFieldManager?

  Hi iam trying to view an EditField and and a 'go' button beside it in the same line.  So I added them to horizontal FieldManager but in sumulatro only the search is coming and button is not visible.  If I add the button to directly _mainscreen that it is displayed in the following line. So, how do I make visible button after adding to the HorizontalFieldManager?

  Please give your support. Thanks in advance.

  private BrowserFieldDemo()
  {
  EditField edit = new EditField("", "search",10, EditField.FILTER_DEFAULT);
  HorizontalFieldManager searchBar = new HorizontalFieldManager();
  searchBar.add(edit);
  searchBar.add(buttonField);
  _mainScreen.add(searchBar);
  pushScreen(_mainScreen);
  }
  

  

  You can also limit the size of your EditField to leave room for your BitmapField.  In theory, you need only substitute getPreferredWidth() for your EditField, but you may have to substitute layout() as well.

  You can see an example of the fact of a ButtonField in this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=7430

  You can also find this useful Thread If you want to go in the direction of Manager:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3745

  I found the code snippet according to who uses the layout to make sure you have 20 pixels to the right of the field:

  Protected Sub layout (int maxWidth, maxHeight int) {}
  Super.Layout (Display.getWidth () - 20, this.getHeight ());
  setExtent (Display.getWidth () - 20, this.getHeight ());
  }

• Is it possible to use the getObjectsUnderPoint of a DisplayObject that is not added to the display list?

  My situation:

  I have a DisplayObject (objA) added to the display list and a DisplayObjectContainer (objB) not added to the display list. When objA receives a MouseEvent.CLICK event, is it possible to use the localX and localY to the event of objA to get objects under the same point in objB?

  Sample:

  var objA:Sprite = new Sprite();

  objA.graphics.beginFill (0);

  objA.graphics.drawRect (0, 0, 100, 100);

  objA.graphics.endFill ();

  addChild (objA);

  var objB:Sprite = new Sprite();

  var childA:TextField = new TextField();

  childA.text = "This is the child.";

  objB.addChild (childA);

  objA.addEventListener (MouseEvent.CLICK, handlerClick);

  function handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = objB.getObjectsUnderPoint (pt);

  trace (objs. Length);

  }

  so your test/trace environment can deliver it.

  Use the following code, publish your swf file and test the swf file in your standalone player (or publish a html and swf and test it in your browser).

  package {}

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  to import flash.geom.Point;

  import flash.text.TextField;

  SerializableAttribute public class extends Sprite {Main2

  private var _objA:Sprite = new Sprite();

  private var _objB:Sprite = new Sprite();

  private var childA:TextField

  public void Main2() {}

  _objA.name = "a";

  _objA.Graphics.beginFill (0xdddddd);

  _objA.Graphics.drawRect (0, 0, 100, 100);

  _objA.Graphics.endFill ();

  addChild (_objA);

  _objB.name = 'B ';.

  _objB.Graphics.beginFill (0xdd0000);

  _objB.Graphics.drawRect (0, 0, 100, 100);

  _objB.Graphics.endFill ();

  _objA.addEventListener (MouseEvent.CLICK, handlerClick);

  Stéphane = new TextField();

  childA.name = 'tf ';

  _objA.addChild (childA);

  childA.multiline = true;

  }

  private void handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = _objB.getObjectsUnderPoint (pt);

  childA.text = "";

  for (var i: int = 0; i

  childA.appendText(objs[i].name+"\n");

  }

  }

  }

  }

• Firefox keeps blocking all the links, I click to open in a new window even sites that are on my allow list and secure government sites. How can I stop?

  Firefox blocks everything I need to click on allow and on some sites I do several times that the Web page reloads the page for a new investigation.
  Very annoying... enough so that I can stop using firefox and not recommend it to others.

  Firefox normally a redirection to another address will automatically follow.

  You can check that the block of redirection is not lit? This setting is on the Panel of the preferences page:

  "3-bar" menu button (or Firefox) > Preferences > advanced

  Under the mini general tab in the accessibility section, uncheck the box "warn me when websites try to redirect or reload the page.

  If you have changed that, no matter what difference?

  If it was already off, it could be an add-on, or some security software or another program filtering that changes an automatic this intermediate page redirect.

• Following SQL plan bad even after adding to the base at 11 GR 2

  11.2.0.3, RHEL 6, 2 node RAC

  I have a request app with 4 shots, and one of them is very well optimized plan. But a few reasons it was not used. I added this sql_id based yesterday.

  {code}

  sql_id: 38w0gp7u4vab

  plan_hash_values - cost

  (1) 1483922261-284

  (2) 1549540093-354

  3-11-3581836057

  4-3875671801-347

  (5) 3584469669-450

  Here's the info from baslines:

  PLAN_NAME cost VAC

  ------------------------------ ------------------

  SQL_PLAN_9m9pwxh4mpy73018854c3 11 YES

  SQL_PLAN_9m9pwxh4mpy7334ba5abc YES 463

  SQL_PLAN_9m9pwxh4mpy733a0debdd No. 118

  SQL_PLAN_9m9pwxh4mpy73962cb03c YES 364

  {code}

  I see 3 plans are marked as "ACCEPTED" and a plan is not yet.  I hope that it must follow the plan at a lower cost.

  Question:

  ========

  When I check the execution plan for the sql_id always according to plan with cost (463) above.  I wish she must use a first with the lowest cost (11), but don't know why it's always the plan suite with higher cost.

  Any idea on why this is the plan bad sequel yet, we have added to the sql database?

  Thank you

  Harry

  The optimizer is free to choose any plan accepted. You can use dbms_spm.alter_sql_plan_baseline to turn off the plans that you don ' t like.

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Remove the Configuration after adding to the models?

  Hello

  I wore as a result of the market-

  1. using the base OS say win2k3 model I've deployed a new configuration (full Clone)

  2. I installed my software and other things on the deployment configuration, and then I want to use this Configuration of my Gold, so I added this to the models.

  3. now after adding (2) for models can I delete above configuration? Which will cause no problem in my model that was created in step 2?

  Kind regards

  esxvmuser

  You can remove anything in LM without worrying from clones of this element.  On the backend, Lab Manager removes only the files that have no dependencies.  So the deletion of your configuration will remove LM but not ruin your model because the files of this model depends on are not removed until all dependencies are removed.

  Dependence of follow-up and asynchronous operation garbage collection nodes are important elements of the LM system.

• cannot enable javascript after trying all the fixes listed for version 25

  After auto upgrade of worm to worm 25 24, javascript stopped working in firefox and will not allow. Have tried every fix I could find in the forum more deleting java and reload, removing all plugins except java, cleaning registry of all references to firefox and reload it and many others. No work. My Internet Explorer and Chrome work very well on all sites and gmail where firefox will not. Suggestions more. Thanks in advance. I have Windows Ultimate on AMD dual core with 4 GB of memory. Worked well with firefox before version 24 update.

  To avoid confusion:

  • http://KB.mozillazine.org/JavaScript_is_not_Java
  • http://KB.mozillazine.org/JavaScript

  JavaScript is embedded in Firefox, so if it is not working properly then there's something blocking JavaScript.
  
  This can be an extension or your security software.

  You can check the javascript.enabled pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox won't work, even if current running in the Task Manager.

  We have about 5 users having Firefox refuses to open. In the task manager the firefox.exe is running. When we run as administrator, it works sometimes, but runs faster. We tried the ESR 38.2 Firefox and that worked for a day or two. I deleted their profiles and installed Firefox fresh with no Add-ons, even a day or two later, it opens. We turned off hardware acceleration, no change. The only thing I can think that I have not done is to clean the registry.

  5 users = all on the same PC?
  Or what with workstations and profiles on a server?

  Any type of configuration customized for when Installer Firefox?

  See if anything here helps you:
  https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• Why firefox will not Web sites load after reset to the default state

  I have mozilla through the redefined troubleshooting tools and fire fix to its default state. Now, Web pages like facebook, hotmail will not charge not or that they do not load correctly.

  A window with this connection is not approved will appear. Even when I validate a security exception it will not charge and it won't let me the option of validation sometimes. Technical details said invalid security certificate. No transmitter channel provided. Issuer unknown error code.

  Unfortunately, fiddler2 certificates issuer may be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
  
  _{Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145}

  afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• just upgraded to firefox 19.0.2 this morning - after typing in the URL and pressing on enter nothing happens. Did the same thing in safe mode.

  Also tried to disable virus protection, but nothing helped.

  Before resetting Firefox takes backup of OLD profile data in desktop, you can restore

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

  Are the settings and policies of an ASA local with shattered fire or power of substitution to the addition of the device that will be managed by the management center of FireSIGHT? I have an ASA that works stand-alone with FP and now need to add FireSIGHT Defense Center/Management Center without losing existing policies.

  Thank you.

  Simply adding as successful will not overwrite the local policies of the firepower of the ASA module gave.

  However, as soon as you deploy any policy (access control, Intrusion, file), healthcare etc. Since FireSIGHT Management Center it will overwrite the one on the SAA.

  You can export one local by using the ASDM Manager and then import it into FireSIGHT for re-deployment as a management centrallly policy.

• Why is trimmed after added to the calendar (CS 5.5)

  User beginner first...

  I added a series of videos to a project, and then add them to a sequence of Assembly.

  When I played the sequence, I noticed that the video is cropped.to in the middle of the frame.

  How can I get this sequence to display the full frame?

  I use CS 5.5

  Match your sequence of videos (clips)

• Problem with moving of the objects after adding to the stadium

  Hello
  I am a student using a version of educational license of Flash MX, obtained through my University, as a prototyping tool. Everything has been fine until last night, when I learned that I couldn't anything reposition on the stage. I am something of a novice with Flash Mx and have been unable to find out what is the cause of the problem. I think I inadvertently used a combination of control keys to change a particular setting. The problem manifests itself first when I added a combo box from the components Panel to the stage and it is located in the upper left corner and refused to be moved!
  Any ideas gratefully accepted.
  

  This problem has been resolved.