Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

Similar Questions

• ButtonField is not visible in the Simulator after adding to the HorizontalFieldManager?

  Hi iam trying to view an EditField and and a 'go' button beside it in the same line.  So I added them to horizontal FieldManager but in sumulatro only the search is coming and button is not visible.  If I add the button to directly _mainscreen that it is displayed in the following line. So, how do I make visible button after adding to the HorizontalFieldManager?

  Please give your support. Thanks in advance.

  private BrowserFieldDemo()
  {
  EditField edit = new EditField("", "search",10, EditField.FILTER_DEFAULT);
  HorizontalFieldManager searchBar = new HorizontalFieldManager();
  searchBar.add(edit);
  searchBar.add(buttonField);
  _mainScreen.add(searchBar);
  pushScreen(_mainScreen);
  }
  

  

  You can also limit the size of your EditField to leave room for your BitmapField.  In theory, you need only substitute getPreferredWidth() for your EditField, but you may have to substitute layout() as well.

  You can see an example of the fact of a ButtonField in this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=7430

  You can also find this useful Thread If you want to go in the direction of Manager:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3745

  I found the code snippet according to who uses the layout to make sure you have 20 pixels to the right of the field:

  Protected Sub layout (int maxWidth, maxHeight int) {}
  Super.Layout (Display.getWidth () - 20, this.getHeight ());
  setExtent (Display.getWidth () - 20, this.getHeight ());
  }

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Firefox blocks popups online even quickbooks after adding to the allowed list

  After the recent update of quickbooks online when using certain functions, a popup is apparently blocked by Firefox and I get a message from qb saying: ' uh - oh. " Please unblock us. We use pop-ups for things like adding new clients, showing alerts and more. It's simple. Here's what to do:
  Click Options or preferences in the top right of your browser.
  Select Allow pop ups for qbo.intuit.com. in fact, the blocked site address is lvdc.qbo.intuit.com. I have also that added to the allow list. The continuous pop-up windows to be blocked and this annoying message will not go away unless I close completely, re - open and perform tasks that have no customers. As soon an I need to do a task with a client, messages window pop-up demon reappear.

  The point is that Firefox stops pop up display after this limit of 20 has been reached. You can try to increase this maximum to a higher value and the pref dom.popup_maximum value of 100 or more (don't go too high) to see if it makes the popups reappear.

• Remove the Configuration after adding to the models?

  Hello

  I wore as a result of the market-

  1. using the base OS say win2k3 model I've deployed a new configuration (full Clone)

  2. I installed my software and other things on the deployment configuration, and then I want to use this Configuration of my Gold, so I added this to the models.

  3. now after adding (2) for models can I delete above configuration? Which will cause no problem in my model that was created in step 2?

  Kind regards

  esxvmuser

  You can remove anything in LM without worrying from clones of this element.  On the backend, Lab Manager removes only the files that have no dependencies.  So the deletion of your configuration will remove LM but not ruin your model because the files of this model depends on are not removed until all dependencies are removed.

  Dependence of follow-up and asynchronous operation garbage collection nodes are important elements of the LM system.

• Following SQL plan bad even after adding to the base at 11 GR 2

  11.2.0.3, RHEL 6, 2 node RAC

  I have a request app with 4 shots, and one of them is very well optimized plan. But a few reasons it was not used. I added this sql_id based yesterday.

  {code}

  sql_id: 38w0gp7u4vab

  plan_hash_values - cost

  (1) 1483922261-284

  (2) 1549540093-354

  3-11-3581836057

  4-3875671801-347

  (5) 3584469669-450

  Here's the info from baslines:

  PLAN_NAME cost VAC

  ------------------------------ ------------------

  SQL_PLAN_9m9pwxh4mpy73018854c3 11 YES

  SQL_PLAN_9m9pwxh4mpy7334ba5abc YES 463

  SQL_PLAN_9m9pwxh4mpy733a0debdd No. 118

  SQL_PLAN_9m9pwxh4mpy73962cb03c YES 364

  {code}

  I see 3 plans are marked as "ACCEPTED" and a plan is not yet.  I hope that it must follow the plan at a lower cost.

  Question:

  ========

  When I check the execution plan for the sql_id always according to plan with cost (463) above.  I wish she must use a first with the lowest cost (11), but don't know why it's always the plan suite with higher cost.

  Any idea on why this is the plan bad sequel yet, we have added to the sql database?

  Thank you

  Harry

  The optimizer is free to choose any plan accepted. You can use dbms_spm.alter_sql_plan_baseline to turn off the plans that you don ' t like.

• Why is trimmed after added to the calendar (CS 5.5)

  User beginner first...

  I added a series of videos to a project, and then add them to a sequence of Assembly.

  When I played the sequence, I noticed that the video is cropped.to in the middle of the frame.

  How can I get this sequence to display the full frame?

  I use CS 5.5

  Match your sequence of videos (clips)

• Problem with moving of the objects after adding to the stadium

  Hello
  I am a student using a version of educational license of Flash MX, obtained through my University, as a prototyping tool. Everything has been fine until last night, when I learned that I couldn't anything reposition on the stage. I am something of a novice with Flash Mx and have been unable to find out what is the cause of the problem. I think I inadvertently used a combination of control keys to change a particular setting. The problem manifests itself first when I added a combo box from the components Panel to the stage and it is located in the upper left corner and refused to be moved!
  Any ideas gratefully accepted.
  

  This problem has been resolved.

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• COUNSULTING JET 6700 / after forest in the eprint centre and ranging in settings exploitation, I

  COUNSULTING JET 6700 / after connection to the eprint center and going into settings I filled the email from authorized users to send print jobs. Next time, I'll check authorized users only two of the five I entered are present.  Why are others deleted?

  If you have problems with ePrint Center (EPC) don't save contacts to the list of senders, I would use this process to try to get the account to save contacts.

  1. connect to ePrint Center

  2. click on the list of senders and add a normal user.

  3. click on Save after adding the address - do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer, disconnect and then come back in ePrint center and check the list of senders.

  If this above process does not work, it would seek to remove web services and adding it back.  This would cause one to lose their email address and need to reprint the code printer and set up the printer on the account again to the EPC.

• I do not have "Firepower of ASA Configuration" menu in ASDM

  Hello

  I do not have "Firepower of ASA Configuration" menu in ASDM.

  I already configured IP to the management port 0/0 10.226.24.181 also to the 10.226.24.130 of the SFP Manager.

  I can ping 10.226.24.130 ASA CLI and have tab in ASDM (with https://No DC configured the button).

  You can see in attachment

  Help, please

  You have an ASA 5525 - X and the module of firepower is 5.3.1 - 152. To manage the power light module on that platform via ASDM requires the runtime current software 6.0 or later version (and your ASDM must be 7.5 (1.112) or later version).

  Reference: http://www.cisco.com/c/en/us/td/docs/security/asdm/7_5/release/notes/rn7...

  If you want to upgrade the module of 5.3 to 6.0 and you do not have fire power manager, then the way ahead is to reimage using the 6.0 system images and boot. This procedure is illustrated below:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  You need the images available here:

  https://software.Cisco.com/download/release.html?mdfid=286271172&flowid=...

  Expand the tree on the left and look under all versions 6.0 > 6.0.0. Use the files asasfr-5500 x-boot - 6.0.0 - 1005.img and asasfr-sys - 6.0.0 - 1005.pkg.

  After getting it to work, you should also update further the the latest version (currently 6.0.1).)

• Users added to the local Administrators group accounts

  Hello

  In our area (win server 2008 / r2) the logged on user object on some clients (windows 7) is added to the local administrator group.
  I can't find the reason for this.
  We have configured restricted groups in the strategy group and after gpupdate/force, the user is removed from the group yet (but administrator rights keep until the next logon).
  Affected, it's always only the user who is logged on the client.
  Of course, I checked the logon scripts, nothing that could trigger such behavior.
  Does anyone have an idea how this could happen?
  Thanks in advance,
  Ingo

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope the above information is helpful.

• Groups and permissions of the user is added to the local disk post-conversion?

  We currently have a security policy with our Windows servers requiring admins to remove unnecessary security groups and users on the local disks. Basically, the SYSTEM and administrators retain full control, but all other users and groups are deleted for security reasons. We find that during a P2V conversion/clone servers, security groups and users are added to the readers of these new virtual machines (see screenshots below):

  Security before and after conversion. Could this be a function of the sysprep post-conversion tasks that work?

  Until now, we thought that, apart from the usual physical changes inherent to a clone, security remains unchanged. We follow best practices for conversion of these machines (running this as a local administrator account, run this converter installed on the machine, by stopping services as much as possible and so on).

  You can compare it to a system where you don't resize volumes, but all other factors are the same?

  If you reduce the size of a hard disk volume during the conversion, it will make a copy of file by file from the source to the destination devices.  We may have to add permissions for the conversion process, but I don't know if it is real.

  If you maintain or increase the size of the hard drive, it is a clone of block level which should be a bit-by-bit copy the source system.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• APPCRASH in Acrobat.dll after adding annots with AFExecuteThisScript()

  I have a c# application that displays PDF files in a WebBrowser control.   I also have a plugin who load the annotations in the PDF (i.e. doc.addAnnot (< propertys >)) through calls to AFExecuteThisScript().  It works; the annots are loaded with success.  However, whenever I do that, I get an APPCRASH after put an end to the application. Since it happens after the app exits, it is out of reach of the debugger.

  Given that this problem occurs only after that my plug-in adds annots the PDF, I think that something focused on Javascript are not released before the release of the app.  I tried doc.dirty = false after adding each annot and also docClose() in AVDocWillClose reminder my plugin, but it doesn't do any good.

  This is NOT caused by AFExecuteThisScript() in itself.  In other words, I can do AFExecuteThisScript with or without return value and there is no APPCRASH.  It only seems to happen when I change the PDF file (i.e. Add annots) through AFExecuteThisScript().

  This isn't a showstopper for me, but just a irritating, because it always happens when the application ends.  Either way, seems not to occur in Acrobat 8.

  This is the signature of the problem that occurred in VS 2005 once the application ends.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DrsDisposition.vshost.exe
  Application version: 8.0.50727.42
  Application timestamp: 4333d 898
  Fault Module name: Acrobat.dll
  Fault Module Version: 9.3.0.148
  Timestamp of Module error: 4b3074b9
  Exception code: c0000005
  Exception offset: 0013286c
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Can anyone help?

  Thank you.

  That is partially right.  WebBrowser (or more precisely our ActiveX) control waits about 30 seconds (give or take, depends on a number of factors) before it actually unloads the DLL of Acrobat.  But it will do.  So maybe you're cleaning things up too early?

  Don't bother yourself, since the ActiveX instantiates its own copy of the DLL for each load in PDF.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!