Why is-work plan in AI CS5.1 jumping around while I draw?

Similar Questions

• Why my work plans maintain alternating selection?

  How can I tell Illustrator to LOCK all work plans except the one I'm trying?

  I work in Illustrator CS5 and every time I have to deselect an element on the artboard 1, which is where all my works of art (by clicking anywhere in the work plan 2, the Artboard switches pallet on the artboard.

  A work plan is implemented within the other work plan. I scrambled confidentiality purps work obviously.

  

  or press Shift + Ctrl + A to deselect, you cannot lock the work plans.

• Canon 70 d when in the AF AREA, why not every block on the development, they jump around. Please explain!

  When I have my Canon 70 d in the AF area, not all squares will show the little box inside, none present in red.  "They seem to jump around and often don't rest the face, I want what it * eyes."  I know how to leave a cliché, but I wonder why the AF AREA does this and how to get it to lock the focus where I want it.  Thank you!!  Such a seemingly simple thing but I did the research on it for hours with no progress!  Thank you!!

  As I understand it the AF system (using the available sensors which can be a single point, group, or all of them) tries to find the area with the best contrast to determine the distance & to lock on it. It is a specific part of the scene. If you want it to be the eye you place a focus on the eye area using the gamepad bit or point central by just selecting. The AF system has no idea what you think is the most important part of the scene. It can also not focus on several areas of the scene, it focuses on one place & DoF to get other areas appear in short.

• Layer mask groups converted from work plans to the size of the artboard in older versions of Photoshop

  I wanted to start this post as an idea, but I couldn't choose communities (it wouldn't let me), so here it is posted...

  ----

  Just came across this with a customer...

  I use for a mobile design project work plans, and I just got a screenshot with some texts asking why among work plans were really great. Way bigger than a phone. (I'm under NDA and cannot post the screenshot, but imagine there are a lot of iPhone size work plans and two of them seem to be at a right angle)

  I opened the file and on my end, everything is the right size. Remembering the weeks ago to tell the customer that they need to update their version of Photoshop for all this work correctly, I have take a look at the screenshot and see that they are on CC2014 - none of the work plans.

  What I'm asking here, is that, since we have data, plans of work are objects of a defined size and 'alive', why not just use these data to hide layer groups at the opening of the PSD / PSB (PSB in my case) in older versions of Photoshop?

  It could save you a TON of hassle and confusion.

  Hi Zack,

  High level to your query response is: no, there is no conduct business case for a general solution to what you are suggesting. So I don't see what is happening.

  I say that as someone who likes to give back and forth and backward compatibility.

  There are two parts of the problem that you raise. They are related and somewhat intertwined.

  1. Having the version previous (2014) do something reasonable with the data from the version the most recent (2015). Either the old version should be taught on the most recent data so it can make a decision about what to do, or the newer version must put additional data in the file format for consumption by the older version.
  2. Back and forth between versions. As you say, a much more difficult problem. In fact, we do a good job of that today. But we must be sure that whatever we do for (1) not to damage and back the wrong way.

  Let's be very clear: 2014 will not be touched, except for critical bugs, absolutely. And even before 2015 is released, it would have not been corrected to make it behave better with work plans. There is no way that I could see what is happening. So all we have done for better backward compatibility had to be entirely done within 2015.

  For the round trip, the general problem is something like this: we want to 2014 to read an object that has properties of 2015, he does not understand. While we might learn ch to keep these properties as opaque property, must also have rules for when these properties are not valid and thrown on the floor. Probably, if the object is changed. But not always. And sometimes when another object parent is changed. And so on. Right now, we destroy them unknown content from their reading in the old version. Make us and record what we understand. As a user, you receive an alert telling you that we are do this. It's the safest thing to do.

  There are special cases where a developer can see an opportunity to preserve a level of backward compatibility and back and forth. We try to do if we believe that it is safe. But this scenario happens only occasionally.

  In the case of work plans, made us really think about this: If we added a mask to the group for backward compatibility, it should do something with this mask reading around 2015. And what would happen if the user edited this mask in 2014 and opened upward in 2015 - and who edited mask do not align with the structures of the artboard? Things started to get dark quickly. We started to see traps. The workflow together to sheath special round trip had to be tested and verified. The cost was rising and this expense must be filtered through a cost/value trade-off. And then what happens when we add a new property to the structure of work plan? At these efforts for nothing?

  So we compromised with what you have today. Work plans become groups in 2014. The Group and the layer structure remains intact. Doesn't secretly add us and remove masks for the round trip. You can safely change the groups to your heart's content. When return you this document in 2015, you redo the work plans of the groups. Was not clear and safe way to do more than that given the time that we had.

  Take a step back and think about your problem, it doesn't seem to be a value to a script that converts group work plans + layer masks for your workflow to have your documents that is consumed by the customers of 2014. This would be carried out in 2015 because she would need understand the work plans. And maybe vice versa from 2014 to 2015, assuming that the documents were not published in a hostile way. We're not likely to write such a script as a generic tool, but someone competent with script might be able to do this.

  More that I intend to write, but hopefully, it gives you additional insight in the compromises that we have faced.

• Hi, how to hide the black work plan in Photoshop CC as in photoshop CS5?

  CC is a bit different in terms of the poster of the black work plan.

  In CS5, it disappears just automatically so I can access my quick true office. But now in CC, it become irritating because it just keep obstructing my view.

  Anyone know how to disable or hide it? Thank you very much!

  If you are a Mac user try to uncheck View > frame Application.

• CS5 - navigation in the work plans

  In the CS5 files page 34 it says "to navigate between work plans, press Alt (Windows) or Option (Mac OS down) and click a button." I am on Mac OS 10.5.8 and for the life of me I can't get this to work. Could someone please check if this does or does not work so that I can check if it's something funny to my system.

  Thank you

  Them

  ERP,

  PL. don't abuse the application before exploring its features yet. Illustrator CS5 has added huge capabilities to the several worktops feature introduced in CS4.

  No, you DO NOT need to activate the work plan for the navigation tool. Press SHIFT + PAGE down or SHIFT + PG. Prev to navigate between work plans.

  You have a hotkey of Opt/Alt + Cmd / Ctrl + 0 to 'Fit artboard in the window.

  PL. see the help documentation for the various features.

• Why is the crop tool of Pathfinder removing elements of work plan?

  Hi all

  I have a drawing with shapes that pass the complex vector graphic board. I want to reframe the elements contained in the work plan without using a clipping mask. My problem is when I draw a rectangle equal to the artboard, place it on its own in the upper layer, unlock and show all forms (there is no open path) and select all the items, the results do not give me a good vector to be cropped. For some reason, it removes items from the artboard and leaves the white lines where my ways are... live the paths of the steam! (there is no transparent and everything is in RGB)

  Here are the before and after of the background of the work. Any ideas?

  before:

  http://farm5.static.Flickr.com/4016/4709057256_0405a036e0_b.jpg

  After:

  http://farm5.static.Flickr.com/4008/4708415687_643beff7d6_b.jpg

  Thank you!!

  For some reason, it removes items from the artboard

  The reason depends specifically on the manner in which your paths are drawn.

  You should be able to do this:

  1. place a horizontal guide at the bottom of the artboard.

  2 knife tool: Position cursor outboard of the artboard. Press Alt. Mousedown (alignment of the guide). ShiftDrag to the right at the bottom of the work.

  However, this assumes behavior reliable and accurate Snap on tool set, which is not Illustrator.

  To avoid all the warnings of illustrators Boolean path very badly implemented combination offers (the so-called Scouts):

  1 rectangle tool. Draw a rectangle on the artboard outboard, alignment of the upper part of it to the bottom of the artboard.

  2 copy.

  3 ShiftClick one of the paths that you want to cut out.

  4. click on the "punch" (subtract) Pathfinder (assuming that the CS5 or CS4; altClick the same Pathfinder in CS3 and earlier versions.)

  5 paste in front. Repeat steps 3 & 4.

  JET

• Why do my work order plan getting all messed up when I try to add new work plans?

  Mac, HAVE CC

  If I create an icon for fine UX library. I have, say, 20 icons on 20 separate work plans. I have the following configuration: 4 lines and 5 columns. Create mu icons, name each work plan to export properly, and all is well.

  But when I come back to this document and try to add work plans, they add no way to 5 x 4.

  Very strangely, they are added in random places.

  Then I try again to "Reorganize the work plans", and they are willing, but once again, in a random order. My names are so disconnected from the previous relevant work plans.

  It's so frustrating. Is there something I'm missing, if it please or do not know, to add better control?

  Thank you very much!!!

  I think everyone goes through a similar confusion with work plans, but once to slow down and realize some items, they begin to work as

  1. Look at your work plan and that one is highlighted it's the artboard select
     
  2. You can easily unwittingly switch to another plan of work, by simply selecting another time with the selection tool. "Here, I've selected an item on the 4th game of darts and now the ' Live from the corners" artbaord is selected.
     
  3. When you use the new work plan command that adds a new after the selected work plan, some people waiting to be added as the last page.
  4. There are some bugs like when you run out of space on the right. I have the last elected artboard, but try to add a new work plan gives me an error because the top row is out of room who shovel have nothing to do with it.
     

  In summary

  • Name your work plans that you can easily get confused, that it is worth
  • Use reorganize artbaords often
  • Reorganize work plans does not care the physical position on the screen of the work plan, it transposes numbers (1 to 11 in my example above)
  • If you want to copy of artboard on the artboard 2 1. Copy the artboard 1 form, select any element of the artbord 2 and use the paste in front or to the rear. You can also use the work plans Panel to select your target artbaord.

• Why the my canvas size is bigger than my work plan?

  Hello

  I'm working on a larger project, where I have mulitple PSDs linked in a single document. The individual DSP that have all plans of work that are the same size, but in inspection of the size of the canvas on these documents vary considerably in size.

  This causes me some discomfort because:

  -When you place the PSD files in the main document, the bounding box of the PSD is much larger than the graphics I want to place.

  -Second, if I want to resize the size of the canvas on the current related DSP, I am trying, it shrinks the chart down much more that what I would actually. This causes me to have to change the size of each graphical element, which sometimes can be quite tedious.

  In my view, that the size of the canvas should be able to resize the artboard size I'm working on, if only when I have a single work plan I'm working on (which is currently the case).

  Is there a way to adjust PS for the canvas size will correspond to the size of the artboard? Whereas if I adjust the length of the arboard, the size of the canvas reflects the change in size?

  Thank you.

  Unfortunately, it is still an open question in our backlog of work.

  The following workaround solution is clumsy, but should work:

  1. choose the tool work plan.

  2 Unger, the gear icon, deselect auto size canvas. This setting affects only the current document.

  3. adjust the size of your canvas as needed using the Image-> canvas size command. It will remain at that size until you change it again manually.

  Work plan documents do not show the extent of the Web, but there are ways to see: layers of filling (with disabled auto-nid) under all work plans, for example.

• Why cannot export a work plan at 200% scale exceed past high 10000px

  I have a 320 x 9357 mobile design. To support the devices in the retina, I am trying to export and to scale my design of 200%, so the final dimensions must be 640 x 18714. When I right click the layer of the artboard and export... the result is an image to 354 x 10357. I have tested the same work plan, but reduced the height to 5000px. The result came out perfect, 640 x 10000. To check this case, I created a work plan of the same design but to 640 x 18714, he exported, but it did not apply to 200%. The result is out, true to size, 640 x 18714. Can I deduce that it is a bug with the function "export as" for work plans at the measurement of 200% at the same time? For some reason I can't change any export 200% if the final result exceeds high 10000px.

  Yes, there is a limitation to export; It is not really because of 200% or actual dimensions, but more on the size and complexity of the exported document.

  We work to improve it.

• Why do I see a white border to the right of my work plan displaying my file on a device with preview Adobe photoshop?

  I work on a Photoshop file with work plans, are all exactly the same width (as have been reproduced from the first). Overview of Adobe on my phone (iPhone 6) seems to make some of them with a white border to the right of the image. This means that I never see the file to the actual size, it will be on a device. Does anyone have ideas on this?

  We have fixed the following error: "files with 10 000 show px height a white extra area to the left or right in the Preview iOS app»  Please, download the last updated overview of the device to obtain the fix:

  Overview of unit November 2015 update available

  https://forums.Adobe.com/message/8248181

• Why top of my work plans do not appear in Illustrator CC 2015?

  Each work plan that I create, from a new document or document existing, is not linked from the top of the artboard. This occurs when you open old documents, as well. Is it possible to fix this? Is this some sort of bug with CC 2015?

  Thank you.

  

  

  

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Why is the tool of work plan is not in Photoshop after update Creative Cloud 2015?

  I recently installed upgrading 2015, however, the work plan tool does not appear on the left side under the move tool. I tried logout and return signature.

  Hi CCriminger,

  Make sure you open Photoshop 2015 CC, and CC 2014?

  Are you long - by clicking the move tool?

  Or Option/Alt click on the move tool to move through them?

  Let us know if this helps

  Concerning

  Pete

• Can I add more than 100 work plans into a single file in Adobe Illustrator CS5

  Hello everyone,

  I have a single file that contains 100 different work plans. I need to add more than 50. Is this possible. When I tried to add the new work plan, the "New artboard" button becomes inactive and the "New artboard" option in the menu popup is disabled. I can do something in this situation?

  Best regards

  No. 100 plans work is the limit. You will need to pursue multiple files.

• Why won't save my work plans in a PDF file?

  When I try to save as a PDF file, two columns of the artboard to save.

  I downloaded my illustrator files in this link.

  Help, please!

  http://www.box.com/s/7e7f174426d346180974

  The file does not contain the work plan you need. What you need, it's a work plan for each inside and outside that surrounds the other 3 work plans.