Why Lightroom does not change its levels in HDR images into something that isn't really there

Similar Questions

• Why Muse does not change the names of certain images or property when exporting to HTML format?

  Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?

  General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).

  The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.

  If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).

• Why Lightroom does not change the creation date of the file? (Mac OS)

  I find that Lightroom changes the creation of files present during the incorporation of metadata. I noticed that this behavior is different from the bridge, which reaches to write metadata changes to the file without affecting the creation date, affecting only the modification date.

  I read in other threads that it doesn't matter when even because moving files between disks will write a new file and, therefore, a new date of creation, but if this can be true in some systems (I don't know) is certainly not the case with Mac OS. For example, I have files dating back at least 1998 which have been moved from disc to disc to disc but still retain their original creation date. Which is as it should be. For many of my older images, there seems to be no capture embedded recognizable don't date anyway, so the creation date of the file is the single timestamp.

  It seems quite logical that the modified date of a file must be updated to take into account that the file has been modified (for example if adding metadata), but it seems to make sense that the date of creation of the file should be kept as the date, this file has been created. Changing them both on the same date seems to be a needless loss of information.

  Some would say that the process of adding metadata to a file creates a new file, the creation date must be updated to reflect this. But I would say that the creation date should be which would include a normal user as the creation date. We do not expect the creation date to change everything simply because a file is rewritten to the disk (for example when the defragmentation), however technically accurate, it would be to say that it is a newly created file. And the difference in behavior between Bridge and Lightroom shows that there is some confusion on this subject.

  Photo software ignores generally the operating system created by file-modification dates, and when he is not ignoring them, treated generally in a non-standard way that varies from one program to a program.  Rather than rely on the dates of the files of the operating system, the photo industry has defined fields of metadata with all sorts of specific photos dates: capture date/time (when the shutter button is depressed), date/time of scanning (when a movie or a print image was scanned digitally), date/time software photo altered image or metadata date/time of GPS location.   While some photo software will attempt to maintain the dates of file-created and - updated, many programs and services Web will not (including, but not limited to, LR).  In addition, many utilities files not always to preserve created and set dates to day that you move, copy it, backup and restore files.

  Therefore, I highly recommend that if you care photo dates and times (as I do), so no matter which photo software you use, you store the dates of capture in pictures industry standard metadata by using the tools provided by LR and other photo software.   In this way, you migrate the program to the program over the years, are you more likely to preserve that important metadata.

  Old photos and scans without that metadata, when you first import into LR, LR will assume that the capture time is the hour of the modified file.  LR to rewrite the date of capture of metadata in the file by selecting and making the metadata you can do > edit Capture time, clicking OK and then by metadata > save metadata to file. You can do it in batch - choose all your old photos and make metadata > edit Capture time, click OK, to metadata > save metadata to file.  LR will affect its time updated each file capture time.   If you want to set the time captured in the file create time, select this option in the window change the Capture time before clicking OK.  But beware that many Windows and Mac file utilities cannot preserve create time, even if they retain changed time, in order to create your files time can be wrong.   And of course, make sure that your backups are up to date and valid before making any new procedure file with which you aren't familiar.

  But if you really want to use non-standard file dates to keep your metadata information, and you want Adobe to modify accordingly the LR, so please give your opinion and vote on it in the Adobe official feedback forum: Bug report: Lightroom modifies the image files creation date. This forum is a user forum in which is rarely involved Adobe, Adobe said they read every post in the forum comments (and sometimes they respond).

• [CS4 |] JS] move anchored object does not change its geometricBounds

  Hello scripters.

  in my Indesign document I anchored objects like sidenotes, sometimes they are overlapping.

  To do this, I'm trying to move until they overlap, I used the following script:

  myInlineRectangles [k] .move (undefined, [0, -2]);

  I put this line in a while loop to move the object (until he do not overlap).

  It works, it moves the object (although I read that it is not possible). The only problem is that the geometricBounds remain the same.

  As I am comparing the geometricBounds in my "all-State" it ends in an infinite loop.

  Why the object does not change its geometricBounds after moving?

  How to avoid this?

  Thank you very much in advance for any response.

  Franzi_ska

  Hi franzi_ska,

  You will need the story containing the anchored object to recompose to get the new geometric limits (after each trip and assuming the anchored object can, indeed, move).

  Thank you

  OLE

• Why voltage does not change when I put a resistor in parallel?

  Hi all

  I have observed something that seems quite strange and I do not understand. I'm under Multisim 10.1.1.

  I have a sinusoidal voltage source that is diode full-wave rectified by a RC parallel network for the purpose of obtaining 120VDC, who has everything works beautifully. I am in a position the voltage with a voltmeter. Crazy is when I put a resistor in parallel with this output 120VDC, voltage drastically changes. For example, when I put a resistance of 1kohm in parallel with the release of 120VDC, the voltmeter reading falls drastically to 0.835V.

  Of course if I perform this test with a simple DC 120V source, the voltmeter reading remains stable at 120VDC.

  Does anyone have AN idea why this is happening? I am full of ideas. Thanks a lot for all the help in advance!

  Sorry for the frequent posts, I was not thinking clearly yesterday night when I posted this question. Voltage divider simple problem. Sorry again!

• 3D LAYER DOES NOT CHANGE ITS SIZE

  I don't know what happens when I convert a 3D layer and try to move in the Z axis, the layer is not to turn, it is as always in the same plane. Everything works when I change project, if I create a new project SORPRISE: works, but when I come back to the same project, still does not... There is something I have not activated?
  Thank you!

  You are probably looking to the front view rather than the active camera.

  On a sidenote, if you are going to use 3D layers you'll have much more success if you add a camera to your scene.

• iphone 6plus is configured to use the position landscape, like previous phones. mine does not change its position when changing phone flattened

  I have an Iphone 6plus will not change the position landscape by turning the phone just like my old 5. This can be corrected.

  Make sure that your phone is not locked in portrait mode.

  Slide upward to access the control center and make sure that the icon with the lock and semi circle is not enabled.

• Why my Firefox browser does not change its background image when I change the theme or personas

  When changing the theme or personas, I'm only able to get the top menu, tab bar and the bottom menu to change to picture the theme/personas, but not the background image. I try to change a lot of theme and personas and even useless.

  My origins are still white no matter how long I have to change. Any help?

  See;

  • Browser Backgrounds: https://addons.mozilla.org/firefox/addon/browser-backgrounds/

• AF:selectBooleanCheckbox does not change its selected state

  Hi all

  My script is as follows:

  I have a master form / detail where master table appears in the form < af:selectOneChoice > and detail appears in the form < af:table >.

  < Af:table > detail lines can be selected with a < af:selectBooleanCheckbox > I've implemented using method:

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/99-checkbox-for-delete-in-table-1539659.PDF

  From the selected information of master and detail I perform a task.

  The problem is that the selected lines in the secondary table are not cleared when I change master < af:selectOneChoice > and return. I added valueChangeListner and tried to reset the value in the iterator of detail.

  This page is only for the selection and no data is being updated so I tried to use Rollback trigger so somehow the box to render it again himself, but not much luck. Restoration does, 'only' delete the selected lines (children / detail) of the first item in the < af:selectOneChoice > (master).

  I tried to use < af:target > with < af:selectOneChoice > but he said that "the objective is not a valid child of a choice."

  I tried to use < h:selectBooleanCheckbox > instead of < af:selectBooleanCheckbox >. But < h:selectBooleanCheckbox > has no attribute autoSubmit I need.

  Any Suggestions?

  I put the default value of the isSelected in ViewObject false field, and his work in collaboration with Rollback and PPR somehow. Thank you

• Hue/Saturation - cursor does not change its image in b &amp; W

  I tried to convert images appear lijke B & W pen and ink drawings. I followed some instructions found on You Tube - (1) double layer (2) color Dodeg invert (3) (4) Gussian blur and Saturation to reduce (5)... However, when a layer is "Color Dodge" and I slide the saturation to-100, it seems to contain color. Even if the opacity of this layer is 100%, the layer below seems to show through. The only way I can get to go B & W is also changing the layer below in B & W (or no saturation). Can someone please explain what I'm doing wrong - or what I wrong? Thanks in advance.

  Review the tutorial. See how the user selects the adjustment layer in the bottom of the layers panel, while you were setting of the image in the Image menu. Adjustment layers are also available in the layer menu.

  

  An adjustment layer is similar to a filter top of lower layers and its controls can be changed at any time. An adjustment of the image changes the content of an existing layer. The first offers a non-destructive editing, it is destructive.

  See http://helpx.adobe.com/photoshop.html . There is also a manual PDF download on this page.

• Why color does not change when I copy one file to another?

  I have 2 indesign files.  It has a layer of background color I want to use.  so I select, then copy it and then paste it in the second file - where the color looks like, and prints, very differently.  duller be precise.  Why does the color remains the same because I made no change, just copied and pasted?

  Thank you!

  There may be several reasons:

  1. Color uses a shade that bears the same name in the target file, then the color in the target file replaces the color in the source file.
  2. You move between files with the merger of transparencies RGB space and transparency CMYK mix space (look in the Edit menu).
  3. The files have different color profiles and color loses saturation when displayed using different profiles in the two files.

• Why lightroom does not recognize my DSLR files

  I get the message "the following files were imported not because they could not be read" then invites me to "save under".

  and all the nave as jpg files is rejected Lightroom import! It's very frustrating as adobe support, after a few days of trying, finally able to get lightroom 6 is installed correctly

  the map is not corrupted, I'm easily able to import in lightroom on my imac 4

  Make sure that you have full read/write permission in the destination folder. That is to say the file to import. The message saying that cannot be read in fact means cannot be written! Good luck

• Why Lightroom does not have "save under"?

  Often, when you change a single image, "save under" would be more useful, instead of export, which is much more complex to use you have to change the destination one other things.

  Thank you

  Not sure if I understand what you want to do, but...

  The changes you make in LR are automatically saved in the catalog, and you can close the program, start it again and continue where you left off.

  You can then see your previous changes in the history panel. There is therefore no need (or ability) to save the image.

  If you need an image for a spesific purpose, use of export.

• Why Firefox does not change the URL of a site when I press return?

  When I try to access http://www.railpage.com.au/f.htm, Firefox removes the slash final and search http://www.railpage.com.auf.htm. Of course, I get an error message. The site doesn't work when I manually insert the missing slash.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Bug? Torch 9800 does not change its orientation to a tilt

  Hi all

  I'm trying to debug the landscape and I can't make it work properly.

  It turns out that my resize() method is never called because

  I check for orientation change, and it's always the portrait.

  No matter how I tilted it (in the Simulator).

  I use the Simulator for 9800.

  When I use the 9500 Simulator, a tilt changes orientation.

  Anyone see this?

  Bug?

  Customer wants this to work, but appears broken on 9800.

  Thank you!

  lucidbee

  If the keyboard is open, then the device is locked in portrait mode.  You must close the keyboard to test it in the Simulator and the device.