Why MSE does not restore when the restored window?

Similar Questions

• Why Wizard does not start when the current user?

  Program does not RUN. Wizard does not open after you select the Option for the current user

  P.S. If you can't always install Firefox, even using the FULL Installer:

  Reinstalling but this time download the file on your computer. When the download is complete, install it as an administrator by right clicking the configuration file and select "Run as Administrator".

• Why IPsec does NOT WORK when the PPP encapsulation is running?

  Hello

  I'm really new in the CISCO world, sorry if I ask stupid questions, I'm still in school to have one day my CCNA?

  By reading some books and browsing the net, I was finally able to connect my to routers with IPsec VPN link.

  The installation program is to follow:

  NETWORK 192.168.1.0/24--->INT ROUTER F0/0 2610XM 172.16.1.1--> INT INTS0/0 S0/0 172.16.1.2 ROUTER 2610XM INT F0 / 0---> 10.0.1.0/24 NETWORK

  I can now PING:

  192.168.1.1

  172.16.1.1

  172.16.1.2

  10.0.1.1

  Sins, I deleted this:

  encapsulation ppp

  Chap PPP authentication protocol

  No idea what I forgot when I implemented this?

  Here below the full configuration of work if you remove the lines above (maybe this can be useful for beginners like me):

  ROUTER

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname Router_A

  !

  boot-start-marker

  boot-end-marker

  !

  !

  No aaa new-model

  !

  resources policy

  !

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  crypto ISAKMP policy 1

  BA aes

  preshared authentication

  Group 2

  address of cisco crypto isakmp 172.16.1.2 keys

  !

  !

  Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

  !

  router_A_to_router_B 10 ipsec-isakmp crypto map

  defined peer 172.16.1.2

  Set transform-set RIGHT

  match address 101

  !

  !

  !

  !

  !

  interface FastEthernet0/0

  IP 192.168.1.1 255.255.255.0

  automatic duplex

  automatic speed

  !

  interface Serial0/0

  bandwidth 64

  IP 172.16.1.1 255.255.255.0

  encapsulation ppp

  64000 clock frequency

  Chap PPP authentication protocol

  router_A_to_router_B card crypto

  !

  !

  IP route 0.0.0.0 0.0.0.0 Serial0/0

  !

  no ip address of the http server

  no ip http secure server

  !

  access-list 101 permit ip 192.168.1.0 0.0.0.255 10.0.1.0 0.0.0.255

  !

  !

  !

  !

  !

  control plan

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Line con 0

  Speed 115200

  line to 0

  line vty 0 4

  opening of session

  !

  !

  end

  ROUTER B

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  Router_B hostname

  !

  boot-start-marker

  boot-end-marker

  !

  !

  No aaa new-model

  !

  resources policy

  !

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  crypto ISAKMP policy 1

  BA aes

  preshared authentication

  Group 2

  address of cisco key crypto isakmp 172.16.1.1

  !

  !

  Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

  !

  map Router_B_to_Router_A 10 ipsec-isakmp crypto

  defined peer 172.16.1.1

  Set transform-set RIGHT

  match address 101

  !

  !

  !

  !

  !

  interface FastEthernet0/0

  IP 10.0.1.1 255.255.255.0

  automatic duplex

  automatic speed

  !

  interface Serial0/0

  172.16.1.2 IP address 255.255.255.0

  encapsulation ppp

  Chap PPP authentication protocol

  card crypto Router_B_to_Router_A

  !

  interface Serial0/1

  no ip address

  Shutdown

  !

  interface Serial0/2

  no ip address

  Shutdown

  !

  !

  IP route 0.0.0.0 0.0.0.0 Serial0/0

  !

  no ip address of the http server

  no ip http secure server

  !

  access-list 101 permit ip 10.0.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  !

  !

  !

  !

  !

  control plan

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Line con 0

  Speed 115200

  line to 0

  line vty 0 4

  !

  !

  end

  Best regards
  Didier Ribbens

  Yes, you are absolutely right. All the best with the learning...

• Why iPhoto does not appear when I opened 13 items on iMac?

  Why iPhoto does not appear when I opened 13 items on iMac?

  Moving to the right forum

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Shortcut Ctrl C does not work in the main window of Firefox

  I use Firefox version 38.0.5, Windows 7
  Since the update Ctrl + C shortcut does not work in the main window of Firefox. (I can't copy text from any website using Ctrl + C).

  Click right and using the copy in the menu works perfectly. CTRL V and Ctrl X work fine without problem.

  Ctrl C works fine when copying text from the address bar and search bar, I just can't copy anything from anything in the main window of firefox.
  

  I tried to run Firefox in safe mode, I have also reset firefox and a virus scanner, but nothing has solved the problem.

  If anyone has any suggestions, that would be great. Thank you

  See:

  • bug 1173979 - copy Ctrl + C is broken in the last Irish FF 38.0.5

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!

• Common library does not appear in the menu windows. What can I do to get the common libraries of Adobe?

  Common library does not appear in the menu windows. What can I do to get the common libraries of Adobe?

  'Common Libraries' wasn't available until the CS6 and became obsolete since the CC.

  You can try these new libraries CC introduced in animate CC: Adobe animate Help | Libraries CC

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Computer laptop Qosmio F15 does not illuminate when the power switch / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here.

  Help will be less appreciated.

  Thank you

  I agree with kody. Of course, it is not easy to say with certainty why this happens. Who tore your laptop? Service or only you?

  To be honest, I think you did it alone. Have you used maintenance manuals?

• Why TB does not freeze when I click on account settings? (Goes from bad to worse!)

  A few days ago, I posted a question about migration backup emails in TB. I got help, but not a definitive answer to my problems. Unfortunately, my wife and I seem to have created an additional problem which must be resolved before we return to the issue of migration of file. Now, TB freezes when I try to check the settings of an account. This may be due to our attempt to copy an old e-mail folder (file .sbd), in my current profile. That's how it happened:

  We copied a saved .sbd folder to
  C:\Users\FF\AppData\Roaming\Thunderbird\Profiles\pnp8j2nf.default\Mail\Local records
  We have not seen any change in TB.

  Then, in TB, we created a folder under local folders, giving it the same name as the .sbd that we had copied. The content become so visible in TB.

  When I tried to check the settings of an account, TB has frozen. Restart TB did not help. Then we tried to go back to our previous steps by deleting the folder newly created in TB and .sbd file in local folders. I restarted TB and PC, but TB still freezes when we try to check the account settings.

  Think that we could have corrupted profile, we also renamed the 8 character profiles .default under C:\Users\FrankF\AppData\Local\Thunderbird\Profiles and C:\Users\FrankF\AppData\Roaming\Thunderbird\Profiles, hoping TB would generate a new profile, but now the TB does not start without the profile.

  We wonder if we should remove profiles.ini or remove its contents to force TB to create a new profile. Any advice on which are originally the gel and how to fix? Thanks in advance.

  Apparent victory! I copied my saved files (trrevilc.default) to

  C:\Users\FF\AppData\Roaming\Thunderbird\Profiles and edited profiles.ini, changing -
  

  [Agroalimentaire1]
  Name =TB difficulty
  IsRelative = 1
  Path = Profiles /kdtnv197. Fix TB
  Default = 1

  TO

  [Agroalimentaire1]
  Name =PlanetXP
  IsRelative = 1
  Path = Profiles /trrevilc.default
  Default = 1

  and Voila! my darlings old emails and accounts reappeared... even though I have an e-mail account w a problem.

  I'm still wondering (after I backup C:\Users\FF) the best way to remove the other profiles. Suggestions would be appreciated. Thanks again.

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• ITunes does not recognize when the Ipod is connected. Help

  I have an ipod classic and only recently (Christmas 2015 day) itunes has ceased to recognize when my ipod is connected to my laptop. However, I know I tried three cables work because the ipod screen shows that it is connected and my laptop opens the file for my ipod, but this does not add to the music on it. How can I my itunes to work again?

  Thank you.

  

  It's what charge my laptop when I connect my ipod instead of loading of itunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 1000 1408AU: painted does not appear when the value.

  Hello

  My origins do not appear when I put them.

  Product name: HP 1000 1408AU

  I have a picture on my desk I would like to be and as my image background and when I right click and select "Set as background image" it does not appear, the background just stays empty. However, when I type the symbol windows on the keyboard (which takes us to the tiles) tile Office has my background image I selected. But when I click on the tile of office he does not come to the top.

  This problem occurred for at least 3 months.

  Also when I go into the control panel and then under the label "Appearance and personalization", there is "change destop background." When I click on this button and select my image, then click on save changes, it does not appear.

  Also under the same label "Appearance and personalization", when I click on the button "Edit theme", he says the image I selected is set on my screen, but it is not. The background on my desk is always empty. (Black Madonna).

  Could someone help me with this problem please?

  Thank you.

  P.s when explaining how to fix it please give simple directions front right for example click this and then he...

  Thanks again.

  

  Here's what looks like my background (even when an image is defined)

  

  Hi Russell

  Welcome to the Forums of HP Support!

  See if this tutorial helps you:
  http://www.eightforums.com/tutorials/29777-background-show-image-solid-color-Windows-8-8-1-a.html

  Concerning

  Visruth