Satellite Mini click - need a HDMI VGA adapter

Similar Questions

• NB550D - the male female HDMI VGA adapter

  Hello

  I need to connect my Toshiba NB550D netbook to a VGA male cable (this is for projection on screen).
  I thought I need a VGA female to HDMI male adapter. However, I'm unable to find.

  All the world is facing this problem before?

  All that I could find is a HDMI/DVI male female. I am considering buying a VGA female to male DVI (not easy to find either), but it sounds a bit heavy.

  Any ideas would be greatly appreciated.

  Thank you.

  Hello

  As I know you cannot connect VGA to HDMI using a simple adapter.
  The VGA port provides analog signals and HDMI supports digital signals

  AFAIK you can use these adapters if the HDMI device would be able to pass the digital signal to analog. But as far as I know is not possible on computers laptops HDMI ports.

  So if you want to connect two ports then you will need to use something like a signal converter, but these pieces are not cheap.

  As far as I know the laptop supports HDMI port, but also a RGB (video out) port.
  So why you n t use this port to connect the projector?

• Quick start for Windows 10: Satellite Mini click and others

  I had some problems with the camera and the battery on the Mini click and another Tablet from the Point of view (Holland).

  He occurered that after updateding etc. on drivcers restart the old problems would return that was due to the quick start option that is set in the bios NLE, but can also be disabled
  Settings > Power Options > Ssettings change existing > Shut doen settings > turn on TASF start [Uncech box]

  It seems that some applications don't close properly when you use the option stop and Hibernate in the memory of QuickStart.

  This occurs if you use either reboot option to turn off manually with a second 10 press the manual power button

  A note to tell you that you can also find the option above via
  Control Panel > hardware and sound > power options > etc.

• Satellite A100-998 - need Driver Ethernet controller/adapter

  Hey,.

  I tried to set up a home network, but discovered that my Toshiba Satellite A100-998 (PSAA9E) doesn't have an Ethernet controller/adapter driver!
  I looked on the Toshiba download area but I don't know how to install the LAN drivers, also I reinstall XP with recovery of product, but without success CD!

  Please can someone help, its quite Important! = D

  Kind regards
  Alex

  On the European driver Toshiba page, you will find the Realtek Lan driver and driver Intel Lan.
  If Realtek doesn t work, then you need the Intel Lan driver.

  Is it so difficult?

• Satellite A135-S4527: need an extra power adapter

  I want to buy an extra power cord. According to the specifications to this page: http://tinyurl.com/36atls the Unit came with a 65W adapter 100-240V (19V x 3. 42A) sector. However, on the same page of the spec under Accessories, it lists PA3516U-1ACA Toshiba 90W Adapter Global (19V, 4. 7A) RoHS.

  I am confused as to what you seek?

  Thank you - kuspie

  Hello

  Looks like the two adapters are compatible options and both are usable with this laptop.
  Just try to ASP (certified partner) in your country and order the compatible adapter. They should send you a good!

  Best regards

• HP n003Tx: adapter HDMI / VGA to extend the display on the screen.

  I use HP-n003tx laptop computer because it is not a VGA port and I would like to thank its desktop display to another monitor, also will use laptop to display on projector (duplicating) Office.

  Can you please help me if I use HDMI - VGA adapter for this purpose, or I need to buy the adapter USB - VGA?

  Thank you

  Hi @Sheenam3,

  Welcome to the HP support community!

  You have come to the right place to ask questions, find solutions and get help from others in the community! I see that you are interested to HDMI to VGA to your HP Pavilion Notebook 15-n003tx. Yes, you can buy a VGA HDMI connector.

  Hit thumbs upward to give me a five Kudos top, just to say thanks for trying.

  Thank you.

• Belkin HDMI - VGA with 4th Gen card

  My Belkin HDMI - VGA adapter works with my Apple TV 2nd and 3rd gen, but doesn't seem to work with my new Apple TV 4. Have any other it works? Maybe I have a faulty adapter or Apple TV. Apple TV 4th gen works with my TV using HDMI.

  Thank you.

  good vga is not compatible fullHD 1080 p so to run the appletv will have to be lowered to 720 p also vga does not support hdcp https://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

  so as the media who relied on hdcp for drm would not work with vga

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• How to connect by Satellite L305 to TV with HDMI Cable VGA

  Hello

  I have a Toshiba Satellite L305, running windows vista Home premium.
  I bought a HDMI VGA cable but when I plug my Satellite on my Westinghouse TV I can't get the two to connect.

  Please help me.

  Hello

  You try to connect to laptop (HDMI) to TV (VGA) using an HDMI cable to VGA?
  As far as I know this is possible only if the s for computer laptop HDMI port can be set to analog signal. As much as I know this option is not available in the BIOS or elsewhere.
  So if you want to connect VGA HDMI Digital common so I have to say; It won't work buddy.

  You will need something like HDMI to VGA Converter that converts the digital signal into analog signal.

• How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

  I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

  Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

  How to install this driver? -Will I install it on my "gold statue?

  I cannot join the domain because Windows Setup cannot find the required driver.

  Tried to install the driver as the latest installation command before the restart, but without success.

  No one knows how to fix?

  Hi Wooltown,

  ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

  http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

  Thank you

  Tyler

• Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

  Hi all

  I guess I'm a little desperate at 01:45 haha...

  I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

  (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

  (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

  (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

  Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

  Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

  Thank you, AJ

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• Need VGA adapter for my old iMac G4/1.0 17 inches in 2003?

  Hello

  Today my old iMac monitor stops working. I was in several stores to try to get a VDG adapter to connect a monitor separated instead. But it is impossible to find one for this older model. Any ideas anyone?

  The specifications are:

  Apple iMac G4/1.0 specifications of 17 inches (flat screen)

  Identifiers: iMac 17 "1 GHz - M8935LL/A - PowerMac6, 1 - M6498 - 1956

  requires Apple VGA Display Adapter

  Thank you very much!

  Johan Vikingo

  The "Mini VGA / VGA adapter" takes many forms. Do not forget

  If you get through one in a page of online sales, the seller knows

  the differences between the "MiniDisplayPort to VGA' and others.

  The part you are looking for would probably be described as: Mini VGA / VGA.

  While I have a stock of old like new, bought since a few years there

  thrift store for $2. It works with my iBook 1.33GHz G4 12-inch

  There is no part number visible on what I say. At the time, I have

  also bought three others, same price, which were sealed in bags.

  (These fellows had reference numbers;) I gave them, at the time.)

  Beware also of MiniDVI-VGA adapters, because these can also or

  is not appropriate in the similar-shaped video out port; DVI was not a

  standard in the old PPC Macs, some PowerBook later + iMac G5

  a establish better conditions later than the old PPC G4 iMac or iBook G3.

  The same element that adapts iBook G4 mid-2005 or before should also

  mount the USB2.0 iMac G4 15/17/20 inches. The adapter I have my

  iMac G4 1.25 GHz 17-inch (USB2.0) port VGA Mini computer.

  A glance through eBay shows a mixture of different parts and customers

  show them that some sellers have sold more than one type via their

  site; Some users could not use the one they bought, others might.

  The Apple site does not seem to show any valid age

  more information regarding these vintage/obsolete adapters.

  In order to avoid some versions of Mini VGA MiniDisplayPort and MiniDVI

  adapters; Some versions are at the correct time, but for PowerBook

  G4 models and a few figures are different part numbers. The plug

  may be formed to fit the plug, but it lacks the appropriate connectors.

  Sorry to not be of a great help; I look to see if I could find an of the

  old Mini VGA / VGA adapters, here; & only found a w/o part number.

  A search shows almost everything except good vintage pieces.

  The site welovemacs.com had a few elements but was not unclear on what made

  specific models exactly; and their price seemed a bit steep. Another Mac

  centered on the sites may be able to locate the vintage adapters. Can be used

  available, then that can also be worn or unreliable.

  This page may have some info on various 'news, in the old, obsolete: adapters

  On Apple and cables - video cards Support Apple

  {None of these are good; so you can use this as an anti reference}

  The person here specifies no iMac G4:

  https://www.iFixit.com/store/Mac/Mini-VGA-to-VGA-adapter/IF153-030-1

  Maybe if the time was nowhere near 02:00 here, I have more chance to research...

• Re: Satellite A300 PSAGCE: need HDMI Controller driver for Windows XP

  I have Toshiba A300-23d (PSAGCE) and I have downgraded to Windows XP.
  Everythink work fine aprat from controller HDMI.

  Need controller HDMI for Windows XP.

  Hello

  The driver for the HDMI Control Manager is only available for Vista 32 bit and 64 bit!
  There is no special driver HDMI for Win XP!

  But why are you needed it?
  I m not an A300 owner but my other Satellite was equipped with HDMI port and I installed Win XP too.
  I n t need a driver HDMI in order to use the HDMI port.

  I have connected my external monitor via a HDMI cable and everything works perfectly!

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community