Why my computer installs windows 10 without my concern?

Similar Questions

• How I made a gateway computer with windows xp without restore discs?

  How I made a gateway computer with windows xp without restore discs?

  http://support.gateway.com/s/manuals/desktops/9532287.PDF

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• Why my computer says "Windows 7 build 7601 this copy of windows is not genuine

  My laptop is 3 or 4 years and one month ago, it crashed I took it to a computer tech and he replaced the hard drive. Since then he has demonstrated this message in the right corner "Windows 7 build 7601 this copy of windows is not genuine". Why it shows this message and how to fix it?

  Ask you to gothrough the thread below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-build-7601-this-copy-of-Windows-not/68b208bc-BE3A-482F-8a12-69ca2c893b0b

• Why my computer says "Windows has detected a hard disk problem", even though it says that the drive works fine in the properties?

  Hello

  I was doing some courses on my computer until this window came on my screen and playback;
  "Windows detected a hard disk problem. I immediately went and checked in the properties to see the current status of the disk, and it says "this device is working properly" I am confused and decided to restart my computer. Again, read the error message and it says that the disc was allowed in properties. Every 15 minutes or so, the same error message. I'm running on Windows Vista Edition Home Premium and have had the computer since 2008. Is this a virus? Or - is this just the computer falsely detect a problem?
  Can anyone help please?

  Thank you very much

  Liam

  What you see in the drive properties in Device Manager has to do with drivers and the drive configuration, not the real state 'physical' the reader.

  First of all, I error side of caution and if sure you have a backup of all your personal files, data, music, photos, contacts, movies, etc., external media (favorite external hard drive).

  Run the check disk (chkdsk); I suggest to run with two checked options, difficulty of file system errors and scan for and attempt recovery of bad sectors.

  How to run the check disk at startup in Vista or Windows 7
   http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Many manufacturers of computers and most hard disk manufacturers have diagnostic tools free you can download and run to check the status of your drive. Check on the web sites of their respective support.

  Hardware and software vendor contact information
   http://support.Microsoft.com/GP/vendors

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• How do I start my computer in Windows 7 without him taking a break?

  When I start the computer it stops after loading Windows, and waits for me to press a button (usually SPACEBAR) seized will continue to start. Is there a way to eliminate this pause?

  If you get the list of users and you want to connect automatically to an account?

  How to automatically log on a user account to Windows 7 startup
  http://www.SevenForums.com/tutorials/377-log-automatically-startup.html

  How to automatically log on a user account in Windows 7
  http://pcsupport.about.com/od/Windows7/HT/auto-logon-Windows-7.htm

• Computer installs windows 7 recovery CD sent by Acer

  Hi guys, I am a problem with a laptop Acer mini. The problem with the computer is a week before, he had a bad virus that could not be removed by any anti-virus program, the computer also led real slowly taken forever for any program to open and Internet Explorer 8 would not start so I thought its better to do a clean install on this computer. So I restarted the computer, press Alt + the F8 and open the computer back to the factory setting menu. In the progress of the deletion of all the information on the arrival of hard drive, then re install window 7 os. But then, the computer gave me an error code saying that the files he was trying to install is missing or damaged. I contacted Acer and they sent me a recovery CD to use and it came on Friday. now I try to do the process again but this time using the CD that made me. the computer copy all the files on the hard disk, so, then when it try to restore Windows 7, it gave me the same error code (the files may be missing or damaged). can someone help me with this situation? I really need help.

  Computer: Acer aspire one D260
  OS: Windows 7 Starter
  Warranty: expire
  RAM: 2 GB
  Processor: 1.66 Ghz Atom Inetl
  Ask for more information if necessary.

  This probably means you have a hardware problem with the PC, the hard drive or memory are the normal suspects.

  Your machine to HD will have a check utility bootable, www.memtest.org has of a free bootable memory utility test

• A lot of questions on how stop and turn off the power of the computer for Windows 8 without having to use the own compiuters out button?

  I have seen a lot of questions on how do I turn off Windows 8 and stop computer but no answers?

  I use CTRL, ALT & DEL, and then click the below icon to the right, there are then 3 choices, sleep, stop, or restart.

  Is there an easier way?

  8 win there a way. 1. move the cursor to the top right of the screen

  2. click on settings

  3 be able to click at the bottom of the screen

  4. choose: sleep, Shut Down, or update and reboot

  This isn't my idea, but someone sent me.

• How to remove virus from my computer in windows xp without using an anti-virus program? is this possible?

  Please tell if it is possible: D because I hate the stuff lol antivirus it slows down my computer please provide related info removal virus with output using an anti-virus and please suggest me some good anti-virus (avast bcz it does not support my system) with a download link

  Thanks in advance :)

  To get rid of the current problem you can restore your system to the State it was before the infection if you have made the system images.  Otherwise, see SpiritX advice in How to remove spyware from the computer

  You can use Microsoft Security Essentials in the future with an anti-spyware application [many are recommended in other threads].

• Why Skype has stopped windows system without feedback?

  Not only windows ceased to Skype, but also avoid again install a new one.

  I think you should ask in the forums of Skype.  They are more likely to be able to help.  http://Forum.Skype.com/

• Can I reinstall Windows 7 without a disc?

  I had problems with my computer and I had to reinstall Windows.  The computer works fine now, but the problem is that I had a Windows Vista disk (the computer was shipped with Vista).  However, shortly after I bought my laptop, I've upgraded to Windows 7 (student edition or something like that) but I did via the internet; I never had a disc.  So when I reinstalled Windows, I reinstalled Vista.  I want to know is there a way for me to reinstall or "reupgrade" from my computer to Windows 7 without disc.

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://www.microsoftstore.com

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  How to upgrade to Windows 7:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• Installation of Windows 7 Professional on a computer laptop windows preinstalled

  So yesterday, I did a check disk on C:, but since it froze because of some damage to windows, I force shut down (I'm sorry), but when windows came after that, the internet was off because the diagnosis Services policy has been down. After awhile, I realized that half of my registry was severely damaged causing most of the main as firewall programs and some services stop and does not start again. I checked all permissions, but nothing allows me to activate the services. My computer was really slow and freezing all the time anyway so I want to reset it to factory settings, or at least format my HDD, but the problem is that my HP laptop had Windows 7 Professional pre-installed on it so I have no disk to reinstall. Now I need help or opinnions popular on what to do, please someone help me on how to reinstall windows without the disc. (Restore doesn't work either) (I checked for the virus as well)

  Hello

  One option would be to create your own Windows installation disc, but you must always be able to read the activation key of 25 characters for Windows 7 Professional of your COA label - an example of a COA label can be seen here.

  You can download the Disk Image, you need from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a very respected source - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are by entering either your model number. or Nr here.

  Kind regards

  DP - K

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902