Why my iMac logout immediately after login?

MY iMac 27-inch has recently begun to disconnect me immediately after the connection. After reboot several times and even unplug, it seemed set. But when another user is connected, the computer immediately disconnected them. Then I logged in t Se if my account still worked, but he did the same for me. Just before this show, the computer also got very warm to the touch at the top. Its about 5 years with a lot of memory and hard disk space. I think that it is up-to-date with the latest software too. Appreciate any information or comments on what's gong on. Thank you!

Try to reboot safe mode by pressing the SHIFT key until it reboots completely, and then try to restart normally. If this fails, then reset the PRAM by LANDAU and iMac SMC reset instructions and see if you can sign in successfully.

Please post back with your results.

Tags: Mac

Similar Questions

  • Why my games crash immediately after clicking on the icon?

    original title: After double clicking on the icon of the game, the problem windows window appears and says it checks for a solution.  I can't understand how to solve this problem.  It does not occur on all games.

    Why my games crash immediately after clicking on the icon?

    Hello
     
     
     
    1. what game you play when this happens?
    2. have you ever run properly on your computer?
    3 did you changes to the computer recently?
     

    Method 1.
    Play this game in the clean boot and then check if it works very well.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

     
    Method 2.
    I would like to look at the logs of the same observer. Here's how you can pull up the newspapers:
    Type eventvwr.msc/s in the address bar.
     
    The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
     
    For more information on event viewer, see the articles below:
    Open event viewer
    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
    What are the information contained in the logs of the event (Event Viewer)?
    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
     
     
    I hope hear from you soon!

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why my iMac run slower after upgrade to El Capitan?

    Why is my iMac (27 inch, mid 2011) (processor 3.1 GHz Intel Core i5, memory 8 GB 1333 MHz DDR3, chart AMD Radeon HD 6970 M 1024 MB, GB 999,35 885,37 GB free storage capacity) slow start when you turn on the computer and run more slowly since upgrading my OS to OS X El Capitan 10.11.4 version?

    Download EtreCheck and post the report.

  • vmplayer - 5.0.0 ends immediately after the start

    Hello

    I'm under fedora 17 with 3.5.2 - 3.fc17.x86_64 kernel and VMware-Workstation-full-version 9.0.0 - 812388.x86_64.bundle.
    vmplayer - 5.0.0 ends immediately after the start.

    vmplayer - 5.0.0 runs only with kernel - 3.4.0 - 1.fc17.x 86_6 4

    The content of the vmware-modconfig - 5653.log file looks as follows:

    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = 5653 version = version 9.0.0 Build = build-812388 option = output
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: The process is 64-bit.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host is the version of Fedora Linux 3.5.2 - 3.fc17.x86_64 17 (Beefy Miracle)
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Msg_Reset:
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': Datei oder Verzeichnis nicht found.
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: —————————————-
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Msg_Reset:
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / home/martin/.vmware/config ': Datei oder Verzeichnis nicht found.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: —————————————-
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in home/martin/.vmware/config file. Using the default values.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-martin/vmware-modconfig-5653.log
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for vmci module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Created new pathsHash.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.
    2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".
    2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.
    2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.
    2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.
    2012-08-23 T 20: 00:54.523 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

    The content of the file looks like kernel.log as follows:

    August 23 at 20:01:01 localhost kernel: [710.974813] general protection fault: 0000 [#5] SMP
    August 23 at 20:01:01 localhost kernel: [710.974818] CPU 1
    August 23 at 20:01:01 localhost kernel: [710.974819] Modules related to the: stv0299 ves1x93 dvb_ttpci ttpci_eeprom saa7146_vv saa7146 dvb_core videobuf_dma_sg videobuf_core v4l2_common videodev media exactly bluetooth rfkill vmnet (O) (O) vsock vmci (O) (O) vmmon fuse snd_hda_codec_hdmi ppdev coretemp lpc_ich mfd_core nvidia (IN.) snd_rme96 snd_hda_codec_analog serio_raw parport_pc parport skge sky2 nfsd lockd sunrpc kvm_intel i2c_ auth_rpcgss nfs_acl i2c_i801 shpchp core KVM snd_hda_intel snd_hda_codec snd_hwdep snd_pcm asus_atk0110 uinput microcode snd_page_alloc snd_timer snd soundcore binfmt_misc firewire_ohci firewire_core crc_itu_t edac_core i82975x_edac [last unloaded: scsi_wait_scan]
    August 23 at 20:01:01 localhost kernel: [710.974851]
    August 23 at 20:01:01 localhost kernel: [710.974853] Pid: 6227, comm: vmware-vmx Tainted: manufacturer of P D O 3.5.2 - 3.fc17.x86_64 #1 rod system product name/P5WDG2 WS PRO
    August 23 at 20:01:01 localhost kernel: [710.974855] RIP: 0010: [] [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974863] RSP: 0018:ffff88016e7e5b88 EFLAGS: 00010246
    August 23 at 20:01:01 localhost kernel: [710.974864] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 000000000000048b
    August 23 at 20:01:01 localhost kernel: [710.974866] RDX: 0000000000000000 RSI: ffff88016e7f2590 RDI: 000000000000048b
    August 23 at 20:01:01 localhost kernel: [710.974867] RTB: ffff88016e7e5b88 R08: R09 ffff8801bfc96610: ffffffffa0d46672
    August 23 at 20:01:01 localhost kernel: [710.974868] R10: 0000000000000038 R11: 0000000000003246 R12: 0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974869] R13: ffff88016e7f2580 R14: ffff88016e7f2580 R15: 00007fffdfd66850
    August 23 at 20:01:01 localhost kernel: [710.974871] FS: 00007ff5cd372740 (0000) GS:ffff8801bfc80000 (0000) knlGS:0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974872] CS: 0010 DS: 0000: 0000 CR0: 0000000080050033
    August 23 at 20:01:01 localhost kernel: [710.974874] CR2: 000000000099ca 10: 00000001446 d 5000 CR4 CR3: 00000000000007e0
    August 23 at 20:01:01 localhost kernel: [710.974875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974876] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    August 23 at 20:01:01 localhost kernel: [710.974878] vmware-vmx process (pid: 6227, threadinfo ffff88016e7e4000, task ffff8801b2699710)
    August 23 at 20:01:01 localhost kernel: stack [710.974879]:
    August 23 at 20:01:01 localhost kernel: [710.974880] ffff88016e7e5bb8 ffffffffa0d48e23 ffffffffa0d48da0 ffff88016e7e5be8
    August 23 at 20:01:01 localhost kernel: [710.974883] ffff88016e7f2580 ffff88016e7e5bd8 0000000000000000 ffffffffa0d47780
    August 23 at 20:01:01 localhost kernel: [710.974885] ffff88016e7f2580 00000000fffffff4 ffff88016e7e5c08 ffffffffa0d4ac1c
    August 23 at 20:01:01 localhost kernel: [710.974888] Scout:
    August 23 at 20:01:01 localhost kernel: [710.974892] [Vmx86GetMSR] + 0 × 83/0xd0 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974896] []? Vmx86GetUnavailPerfCtrsOnCPU + 0 × 0 × 150/150 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974900] [HostIF_CallOnEachCPU] + 0 × 0 × 20/40 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974904] [] Vmx86_GetAllMSRs + 0x2c/0 × 50 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974907] [] LinuxDriver_Ioctl + 0x70f/0xd40 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974911] []? unlock_page + 0 × 0 × 31/50
    August 23 at 20:01:01 localhost kernel: [710.974914] []? __do_fault + 0x3f9/0 × 560
    August 23 at 20:01:01 localhost kernel: [710.974916] []? handle_pte_fault + 0 × 95/0xb10
    August 23 at 20:01:01 localhost kernel: [710.974920] []? ext4_file_write + 0xbf/0 × 260
    August 23 at 20:01:01 localhost kernel: [710.974922] []? free_pages_and_swap_cache + 0xad/0xd0
    August 23 at 20:01:01 localhost kernel: [710.974924] []? handle_mm_fault + 0 × 259/0 × 320
    August 23 at 20:01:01 localhost kernel: [710.974927] []? do_page_fault + 0x1bc/0x4b0
    August 23 at 20:01:01 localhost kernel: [710.974930] [LinuxDriver_UnlockedIoctl] + 0 × 0 × 18/20 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974933] [do_vfs_ioctl] + 0 99/0 × 580 ×
    August 23 at 20:01:01 localhost kernel: [710.974935] [sys_ioctl] + 0 × 99/0xa0
    August 23 at 20:01:01 localhost kernel: [710.974937] [system_call_fastpath] + 0 × 16/0x1b
    August 23 at 20:01:01 localhost kernel: [710.974938] Code: 83 c4 e8 a6 01 84 3rd e0 44 89 e0 48 3 b 43 08 and 72 e9 48 89 df e8 33 b4 42 e0 eb 9th 90 55 48 89 e5 66 66 66 66 90 31 c0 89 89 32 31 f9 c2 ff 41 89 c0 48 e2 20 89 f8 4 c 09 48 89 16 5 c2 c1 d c3
    August 23 at 20:01:01 localhost kernel: [710.974962] RIP [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974966] RSP
    August 23 at 20:01:01 localhost kernel: [710.974968] - [end trace 04aa45b3d8c2dbda].

    VMware kernel modules compiles well

    [root@fc17 tmp]# vmware-modconfig --console --install-all
Stopping vmware (via systemctl):                           [  OK  ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/hostif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/driverLog.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/apic.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/memtrack.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/hashFunc.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/vmx86.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/cpuid.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/task.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/comport.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/phystrack.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmcore/moduleloop.o
  LD [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmmon.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmmon-only/vmmon.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/hub.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/userif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/netif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/bridge.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/filter.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/procfs.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/smac_compat.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/smac.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/vnetEvent.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/vnetUserListener.o
  LD [M]  /tmp/modconfig-C4tvy7/vmnet-only/vmnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmnet-only/vmnet.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/filesystem.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/file.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/block.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/module.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/super.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/control.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/stubs.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/inode.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/dentry.o
  LD [M]  /tmp/modconfig-C4tvy7/vmblock-only/vmblock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmblock-only/vmblock.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmci-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/linux/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciResource.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciContext.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/driverLog.o
  LD [M]  /tmp/modconfig-C4tvy7/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmci-only/vmci.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmci-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vsock-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/af_vsock.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/vsockAddr.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/notifyQState.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/util.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/stats.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/notify.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/driverLog.o
  LD [M]  /tmp/modconfig-C4tvy7/vsock-only/vsock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vsock-only/vsock.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vsock-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only'
Starting vmware (via systemctl):                           [  OK  ]

    The two files "/ usr/lib/vmware/settings ' and ' / home/martin/vmware/config ' do not exist.
    Now the question is, how do I create these files or what files should be removed from the old settings. ?

    Why are there vmplayer immediately after startup. ?

    I had what I think it's the same problem on 9, Fedora-17 64-bit workstation.

    I used the patch vmmon here:

    http://communities.VMware.com/thread/400616?start=15&TSTART=0

    and modifed the patcher created by Artem S. Tashkinov to apply it.

    Solved it for me, I hope for you, too.

  • Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

    Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

    Just what do slow down? Rotation beach balls?

    Run and view the results here so that we know more about your configuration.

    http://etrecheck.com/

    EtreCheck

    https://discussions.Apple.com/docs/doc-6172

  • Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

    Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

    Hello

    1. What is the security update article?
    2. are there any other security software installed on your computer?

    If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

    Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    See also:

    The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

  • After installing LR6.2 and 6.2.1 why system (iMac) is too slow?

    After installing LR6.2 and 6.2.1 why system (iMac) is too slow?

    Hi only1tu,

    Have you tried to reboot the machine.

    otherwise try to disable the GPU in the Lightroom preferences.

    Go to the menu of Lightroom

    Click on Preferences

    Go to the performance tab

    Uncheck the GPU

    Restart the Lightroom.

    Let us know if that helps.

    Kind regards

    ~ Mohit

  • The Adobe application manager maintains unexpectedly close immediately after that b being open when I try to download After Effects and repeat the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

    The Adobe application manager maintains unexpectedly close immediately after b being open when I download tryto After Effects and repeating the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

    Drogers1102 please use the uninstaller of creative application Cloud Desktop, then reinstall.  You can find more details at the request of error "Failed to install" Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.

  • iMac running HOT after Sierra installed

    Someone at - he had a problem or noticed that their Mac running hot since the installation of Sierra?

    In addition, 2 days ago, I got a notice that I had short-term memory application and iTunes and Safari have been paused. It was not all applications running overnight and I have 20 GB of RAM and it showed 18,86 GB have been used. I had to basically force iTunes and Safari to close, and then restart the iMac to free the memory and be able to access the computer.

    Never had these problems before the Sierra has been installed. The iMac never ran "to hot' (more than 121 degrees last night - due close to refresh it).

    So if anyone ran into any of these questions or knows a solution I would be very happy.

    Thank you

    SAL

    Difficulty installing Sierra

    Try each of them in order. A test to see if the computer works properly:

    1. Reset the PRAM
    2. Reset the controller (SMC) system management
    3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
    4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
    5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

  • iMac, frozen to the login screen

    Everytime I turn on my iMac, it loads to the top of the login window. I get my password, it freezes and an apple logo appears then the computer restarts and then freezes on the login window

    Not a lot of information. I guess you ElCapitan.

    First do the 'reset Pram:

    How to reset the NVRAM on your Mac - Apple Support

    Try again.

    When it freezes again:

    Press the key TO start and then press on and hold down the SHIFT key, it should start in "safe mode", it's slow, when you see the login window, login. After login, go to the Finder.

    Does it work? If so, restart normally.

    Otherwise: restart and now the keys CMD + R: it starts, slowly, in the "RecoveryPartition", choose form the menu DiskUtility, ElCapitan click FirstAid, let it do its job, all messages?

    in OSX like choose DiskUtility and 'repair permissions' and 'repair the disk.

    Turn it back on.

  • WiFi connects immediately after starting

    Hello community,

    I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

    Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

    Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

    I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

    Any ideas?

    (El capitan)

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

    Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

    I tried to provide screenshots - insert an image does not accept.

    Just happened while the iMac was asleep.

    Thanks in advance

    Tony

    The image seems to reflect the possibility of problems of graphics processor.

    Some models had a history of failure or bad solder connections. others may

    have a combination of capacitors & other materials; Finally we have to fix.

    https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

    One of the remedies for a graphics card problem, is a re - weld made by the

    users who have taken their card from the computer & their cooked in the kitchen oven.

    This idea has worked for some; You may be able to contact an authorized Apple

    Service provider or see if any of the parts suppliers in line can answer questions

    availability of replacement given to nine graphics cards, if you were

    can be removed from the logic board or if it is affixed, or welded to the card.

    An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

    can show that if that article can be virtually eliminated, if if will show process.

    https://www.iFixit.com/device/iMac_Intel_24%22

    The details of the computer in the bottom of your post isn't an iMac G5 model, and

    There is no powerPC G5 processor equipped Macs after late vintage

    2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

    and would be a model of Intel. They use a different architecture than G5

    powerPC even though in some respects are similar at least in the General design.

    This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

    https://www.iFixit.com/device/iMac_G5

    If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

    Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

    the Visual problem on the screen; an underlying hardware problem is a likely cause.

    • Reset the management system (SCM) controller on your Mac - Apple Support

    • How to reset the NVRAM on your Mac - Apple Support

    If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

    Introduced April 2008

    Abandoned March 2009

    IMac8, 1 model identifier

    Model number A1225

    EMC 2211

    MB325LL/A order number

    First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

    You may be able to find the numbers of reference and research for replacement new or repaired

    old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

    It failed due to a graphic processor; where she lived the BestBuy did not fix

    She even if it has been purchased by them with their extended warranty; No applecare.

    So, there are some out there in almost perfect condition, but not fixed, always.

    Do not know if the charges involved would be the value relative to the other

    later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

    Sorry I don't have any new ideas regarding this problem.

  • Homepage of vpn clientless ssl after login problem

    Hi all

    I have a problem with my vpn without customer portal.

    I need to configure when a user connects via the portal, something that works very well, it ends up on the home page.

    At the present time there ends up immediately on the anyconnect button.

    With the home page, I say the first button that says 'home '.

    Users should be able to click on "Web Applications", hereinafter 'House '.

    Under 'Web Applications' users must have their button aswell "Anyconnect".

    First of all, I wasn't able to make the portal "Anyconnect" button display in the menu.

    Then after awhile, I realized that when dynamic access policy says "Unchanged" on the page "access method".

    When you change this setting "Client Anyconnect" portal no yard is no longer, I find myself immediately at the start of the anyconnect client.

    When you select 'Portal' get the page of the portal, but the menu anyconnect is missing.

    When you select 'Time-by default-portal' I get the anyconnect button and all the other menus, which is good.

    But I hold the home button to be the default.

    And not the anyconnect, after login button immediately you get the anyconnect start page.

    And then finally and most importantly, when you select 'Time-by default-Anyconnect' you login to the Web portal, anyconnect begins immediately in the menu.

    Something we want the end user to manually (click on "Start Anyconnect") I mean!

    I'm sure that DAP which forces because of the options above.

    But what selection unchanged or anything that does not include Anyconnect, then the anyconnect button went...

    I don't know what I can do to change that.

    Am I missing something?

    I would say that DAP is not necessary, but when I put everything in the DAP default by default, then the anyconnect button went into the menu...

    Kind regards

    Robin

    Here is my configuration:

    attributes of Group Policy GP_company_intranet_portal

    value x.x.x.x WINS server

    value x.x.x.x DNS server

    Protocol-tunnel-VPN-client ssl clientless ssl

    Split-tunnel-policy tunnelall

    company.local value by default-field

    value of IPP_SSLVPN01 address pools

    WebVPN

    the value of the URL - list BML_company_intranet_portal

    Disable http proxy

    AnyConnect Dungeon-Installer installed

    AnyConnect ask to activate default webvpn

    value of customization CO_company_intranet_portal

    gzip http-comp

    hidden actions no

    activate ActiveX-relay

    disable file entry

    exploration of the disable files

    disable the input URL

    disable the auto-signon chip-tunnel

    type tunnel-group TG_company_portal_localauth remote access

    tunnel-group TG_company_portal_localauth webvpn-attributes

    personalization CO_company_intranet_portal

    allow group-url https://portal.company.be

    xxxxxxxxxx of encrypted password 0 privilege testaccount user name

    attributes of testaccount user name

    VPN-group-policy GP_company_intranet_portal

    Protocol-tunnel-VPN-client ssl clientless ssl

    disable the password-storage

    value of group-lock TG_company_portal_localauth

    type of remote access service

    Troubleshooting when you are connected to, just to check if the right group strategy is used:

    FW-company # display webvpn vpn-sessiondb

    Session type: WebVPN

    User name: testaccount index: 510

    Public IP address: x.x.x.x

    Protocol: without customer

    License: AnyConnect Premium

    Encryption: 3DES hash: SHA1

    TX Bytes: bytes 114897 Rx: 16087

    Group Policy: GP_company_intranet_portal

    Tunnel of Group: TG_company_portal_localauth

    Connect time: 14:50:56 GMT + 2 Thursday, October 25, 2012

    Time: 0 h: 00 m: 03 s

    Inactivity: 0 h: 00 m: 00s

    Result of the NAC: unknown

    Map VLANS: VLAN n/a: no

    Hi Robin,

    You can try:

    1. Please remove / disable the rules of RAP and keep only one by default with the default action and parameters (continue). This is to exclude the DAPs as the primary cause.

    2 - GP_company_intranet_portal group policy attributes

    WebVPN

    AnyConnect ask no webvpn default

    Let me know how it goes.

    HTH.

    Portu.

    Please note all useful posts

  • How to create a task that runs once a day, immediately after the opening of session?

    Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.

    The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.

    Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?

    Hello Jeffrey,.

    You can refer to the links below and see if that helps.

    Create a task

    http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx

    Modify a scheduled task

    http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx

    Change an existing task

    http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

    Please write back to us for assistance and we will be happy to help you come.

    Thank you

  • Workflow optimal for display a response immediately after a question is submitted

    Hi everyone-

    I'm sure someone has encountered this issue before, but I have not found all the signs for her, so I if I would you find out because I am preparing a Captivate demo right now.

    The scenario is as follows - normally when a quiz is created, a user has the opportunity to review the answers to the questions, once the quiz is completed.

    However, the customer, I work with prefer responses is displayed immediately after the issue is submitted.

    My question is what is the workflow recommended in Captivate to build this type of solution for a quiz that would be a) manageable and b) be easily reproduced...

    I have considered the following:

    (1) the correct answer will appear in the default text box "Incorrect - click anywhere or press on 'y' to continue." However, it seems difficult to manage the boxes will need to be updated all the time.

    (2) connect the question slides to a separate set of slides that show the answers then lead to quizzes. I think it's a little easier to manage because the blades are in a separate 'path' so to speak.

    (3) using the slidelets?

    Does anyone have recommendations? Thank you

    Edward

    I suggest that you include only the answers to the questions in the legends of feedback on the actual question slide.  This is the easiest to manage place.  These subtitles are displayed immediately when the user submits their response.  Feeback captions can be as large as you want.  I don't understand why you say this option would be 'difficult' since the legends would need to be updated all the time.  Legends would be updated if you have changed the question in a way that the answer was now different.

    Remember that Captivate you cannot put interactive objects on a question slide.  This definition includes slidelets.

    If you need to include much more detail (or graphic or video) in your comments, you must use another slide, preferably placed immediately after the question slide.  If the user gets the right answer, define the action of success for the question to jump directly to the next question.  If they make a mistake, you can set the action of the failure to access the answer slide and have action OnExit this slide to move to the next question.

    But I stress that the only reason in this way to use extra slides is because you need more text in your comments. In most cases this would just complicate things unnecessarily.

Maybe you are looking for