Workflow optimal for display a response immediately after a question is submitted

Similar Questions

• Display works only for 2 or 3 seconds after it is black on the Qosmio G50

  Hello

  I have a problem with my G50.
  On starup display only works for 2 or 3 seconds after it is black, I connect to an external display and using FN + F5, I can see everything on the second screen, if I turn to the internal using FN + F5 display, it works just the same 2 or 3 seconds.

  Thank you

  Hello

  Looks like an internal display of FL inverter delivers hardware problem but I think that it s display.
  It s certainly not display card problem because the external monitor works properly so I think that s no GPU, but screen FL inverter.

  I recommend to ask a technician of Toshiba laptop for a detailed audit of the part material

• My PC starts immediately after stopping off for a considerable time

  My new PC will not start immediately after the power supply is cut off for several hours. However, it starts up after several minutes of trying. Is this a problem related to the power supply or other materials? I assembled just this new pc, and before that, it never happened. Here are the specs of my pc:

  GX650 Bronze PSU CoolerMaster; Processor Intel i5 2320; Intel DH67CL mobo. 6750 2 GB DDR3 graphics card Sapphire; 2 x 4 GB Corsair RAM; Kingston 64 GB SSD; WD 1 TB HARD drive; ASUS DVDRW
  My PC is connected to the mains through an inverter 600w APC.
  Is it possible that it could also because of the connection of power supply of the pc case itself? For the record, the case is an old one that has experienced a recent surge that destroyed my previous mobo and basically almost everything in it.

  Hi wannmann

  These forums focus on Microsoft software.

  Your best resource for the problem you describe would be the motherboard support forums. Here is a link for your convenience.

  Support of Intel communities:
  http://communities.Intel.com/Community/Tech

  Concerning

• Discover 5.2 recompose pool linked clone - Wait for user to logoff - refresh immediately after logoff - connected on VM never reconstruct after the closing session or refreshment.

  Lets say, we have 20 clones related hen who has refresh immediately after logoff. 10 people are connected to VM 1-10. When plan us a restructuring of the entire pool, one would expect that VM 11-20 would recompose afterwards, as the newspaper of people out of 1-10 of Vm, the VM redial for the new replica. Instead, VM 1-10 are refreshing to a control point and recomposing replica ever again. It seems that when refresh after logging has not been defined, recompose work properly. These two elements are mutually exclusive?

  I guess that's what you're talking about?  http://KB.VMware.com/kb/2006707

  If so, Yes, this is a known problem, updating of log will cancel and replace a Redial on newspaper.  I raise this issue until I got was blue and you have heard that it will be corrected in a future version

  For now, I do it manually reconstructs in the pool > inventory tab > desktops (see composer details) > right-click on desktop > redial.  Usually, I do on a single desktop computer and let the replica to create and lots of then recomposed.  As recompose and selecting force their users to disconnect will do the trick also.

  Moderator Note: edited the post to remove NDA restricted information.

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• WiFi connects immediately after starting

  Hello community,

  I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

  Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

  Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

  I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

  Any ideas?

  (El capitan)

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Widows Explorer crashed immediately after Windows update

  Original title: I think that my laptop updated overnight. Now when I try to turn on the widows Explorer crashed immediately after, sign in

  As stated above I think that my updates of the laptop from one day to the next. Now when I boot, windows explore crashes immediately after the connection quite a lot. When I click on an icon

  It records the click but does nothing. None of the icons will load in the right hand icon down either. Help please :(

  Hello

  I suggest you to check the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for further analysis and troubleshooting.

  Method 1:

  Step 1:

  I also suggest you to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Method 2:

  Alternatively, you can try to perform the scan of the auditor of the system files on the computer.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.

  Hope this helps and keep us posted.

• PDF file generated from Reporting SERVICES hangs when opened in Adobe reader 11 and saved as with "optimized for fast web view."

  Large pdf (over 1000 pages) generated files form SSRS crashes when opened in Adobe reader 11 and saved as with "Optimized for fast web view" activated. This saves fine with disabling this option. However, our customers are not ready to accept this solution because they do not want to change any settings. Please suggest if we should create a ticket with microsoft for SSRS allow the generation of pdf quick display of Web pages or is it an option in Adobe to fix this problem without changing the settings.

  The SSRS file has Fast Web View: 'No' and that's how Microsoft SSRS generates these files.

  Thank you for the complete maxwyss response

  As you have indicated, the PDF SSRS seems to have some elements that are quite similar to be supported for fast web view.

  We asked customers to disable the fast web view, but the customer is big enough to make a change individually on their machines and so were looking for a solution.

  I saw in several forums and a few discussions here as well as disable the fast web view option works for pdf fails.

  Which was just wondering if its known that multiple PDFs genarted by third parties may have problems with the optimization, the Save as optimized for fast web view could be disabled by default installation of acrobat reader rather than be enabled by default

  Thanks again for the reply!

  PS: links indicating similar problems

  https://forums.Adobe.com/message/7965091#7965091

  https://forums.Adobe.com/thread/1456971

  How to fix Adobe Acrobat "save under" error - Digital Factory tool blog

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/63cf1325-2054-4ef1-9c5d-631da6a30 cfc/file-size-of-exported-pdfs? Forum = sqlreportingservices

• Flickering of screen (pulse) immediately after the start

  Hello

  I use Adobe Creative Cloud. Immediately after the departure of Photoshop CC (2015) the screen is flickering (pulse black and white).

  The same problem occurs with InDesign CC (2015) and Illustrator CC (2015) (I do not try other products). I can create a new file (with CTRL + N), the new file is opened, no flackering more is seen... but, in the background, the "pulse" is always present. So I can not for example open a menu or work without pulling hair. During the flackering, the mouse moves very slowly, that the processor is loaded to 100%!

  It seems the app want to display a splash screen, but cannot.

  I updated all the drivers... try the different settings (GPU)... without success.

  • Adobe applications are the latest
  • Laptop Lenovo Thinkpad T540p, Intel Core i5 - 4200 M 2.50 GHz
  • Windows 7, 64-bit
  • RAM: 4 GB
  • Graphics card: Intel HD 4600 graphics card
  • The graphics driver version: 10.18.14.4332 (latest version) / date: 20.11.2015
  • Screen resolution: 1920 x 1080, true color (32 bit), 60 Hz

  Someone an idea?

  Thank you

  Hello

  Greetings!

  Right click on photoshop and choose Run as administrator.

  Now, try

  Concerning

  Jitendra

• Cannot preview filetype please download the file for display and garbled text on an uploaded image

  Dear Madam or Sir,

  When I click on a file titled 'Subject access request letter re account 12527629 Sort Code 60-10-34 24022015.pdf number', which is stored in my account on Acrobat.com, I get the response "cannot get a filetype overview please download the file for display. This file was created from a document in OpenOffice .odt the same title. Please notify.

  I downloaded an image, which is supposed to be a .pdf file, since the installation of web of Royal Mail Track & Trace using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its resemblance to the text. Please notify.

  Kind regards

  Ron Platt

  PS I tried to join the two files (.pdf) but informs me that "image type is not allowed. Please notify.

  Hi Ron,

  In your efforts, you mention in step #6 you save the file as a PDF secure. Applied security files cannot be previewed to the customer, that's why you get the message "cannot preview filetype please download the file for display. This message preview complete and preview the hover. After downloading the file, you should be able to access it without error (within the limits of the guarantee applied).

  The hover behavior you report is expected. If you hover over a file name, you will see "hover" noticed after a few seconds, that will get you a small preview of the file (rather than having to open it in the overview). If poster only if you hover over a name of file, not in the empty area of each line, so that you have not seen continually arise.

  Hope this helps,

  Laura

• Why my iMac logout immediately after login?

  MY iMac 27-inch has recently begun to disconnect me immediately after the connection. After reboot several times and even unplug, it seemed set. But when another user is connected, the computer immediately disconnected them. Then I logged in t Se if my account still worked, but he did the same for me. Just before this show, the computer also got very warm to the touch at the top. Its about 5 years with a lot of memory and hard disk space. I think that it is up-to-date with the latest software too. Appreciate any information or comments on what's gong on. Thank you!

  Try to reboot safe mode by pressing the SHIFT key until it reboots completely, and then try to restart normally. If this fails, then reset the PRAM by LANDAU and iMac SMC reset instructions and see if you can sign in successfully.

  Please post back with your results.

• Suddenly cannot open new tab, immediately after an update of MSWindows7, or after the upgrade to Windows 10 - tired, all kinds of bugs, no luck.

  Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.
  I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I'm not going to create a new FF profile.
  I restart my PC, nothing helped. I chose "never" (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
  I installed FF for Windows 10 just after the installation of Windows 10.
  I am a user of whether average PC.
  Thanks for any help you can give,
  Steve V.

  Dear cor - el,

  Now, I'm happy! Thank you very much.

  New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.

  Anyway, thanks again for sharing your time and skills.,.

  Steve V.

• password to iCloud questioned immediately after you enter (Mac)

  Immediately after an update a few months back, that I had to change my password to a stronger one, iCloud began telling me that he had a problem with my account:

  

  When I went to preferences, this happens:

  

  So I type my password (I know the password is) and he accepts...

  

  ... For about half a second before immediately returning to the screen:

  

  This was bugs me for months so if someone could help I would be very grateful!

  Thank you.

  If you enter the password once again it works or just reset and same screen then?

• A black band appears just below the bookmarks toolbar immediately after the uninstall of a program called 'Picexa '.

  A black band appears just below the bookmarks toolbar immediately after the uninstall of a program called 'Picexa '.
  Please, what is your solution?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can use one of them to set toolbars to display.

  • Firefox '3-bar' menu button > customize > show/hide toolbars
  • View > toolbars
    Press the ALT key, or press F10 to display the Menu bar
  • Right click on empty toolbar space

• How can I insert a new blank page immediately after a proposed page

  I'm trying to change an iBook of 147 pages, and I want to add a new blank page immediately after page 73.  I tried ctrl-click on the page, but the new page is added at the end of the chapter, which is obviously not where I want to.

  Hello Jeff Reeves,.

  Thank you for using communities of Apple Support.

  From your post, I understand that you are not able to add a new page in the location you want to add. I know how it is important for your book or in the order that you want it to be in. Once you add the extra page will be able to do drag where you want to put it to you?

  I recommend to review the section in this article to add a new page.

  iBooks author: Add, reorganize, or delete pages, chapters, and sections

  Add a new page

  1. In the book pane (shown above), select the chapter or section to add pages to.

  2. Click Add page in the toolbar, and then choose Pages > Option.

  Tip: You can also add a new page by clicking on the order page in the book pane and choose Insert Page on the shortcut menu. The new page uses the default layout for the chapter or section.

  Reorganize the chapters or sections

  In the work pane, do one or both of the following:

  Change the order of the chapters: drag them.

  Change the order of the sections: drag an item to a new location in the chapter, or to another chapter.

  When the new page is added at the end of the chapter, see if you are able to drag to the location wished it to be in.

  See you soon