Homepage of vpn clientless ssl after login problem

Similar Questions

• unexpected behavior with vpn, clientless ssl and smart tunnels on ASA 5510

  Hi there, hope someone can help

  I am able to set up a smart tunnel for an application and everything works fine, however...

  Without smart tunnel, the user must navigate the portal interface (because of how he encapsulates urls and basically acts as a proxy), it is too beautiful and good and expected behavior. If a user does not enter a URL in the portal URL entry (only enters the normal address bar) she takes them outside the clientless ssl vpn portal.

  Now too the point to start a smart tunnel, URL, the user types in the normal address bar is not encapsulated in the device URL, although they are still placed through our network (and note, the intelligent application of tunnel is not the browser, which is be IE). How can I know it? sites that would be blocked by a web filter are blocked with smart on but not PVD tunnels with smart tunnel.

  I need to know if this is intended behavior or not and how and why this is happening?

  Thanks in advance

  In my view, this is how it works. If you are referring to this doc:

  https://supportforums.Cisco.com/docs/doc-6172

  Smart tunnel is functioning all or nothing. Which means once you turn it on for a specific process or a specific bookmark, all your traffic for this process (and the browser you are using to open the SSL Clientless session ) will pass through the ASA.

  Example: Enable option ST for a process or bookmark #1 (which connected IE used to login). Opening a separate instance of the IE browser will be all traffic through the ASA, tunnel, if the new browser window belongs to the same process. All tabs on the movement of this browser browser will be smart tunnel, even to Favorites (ie. #2 favorite) are not specifically the chip in the tunnel. You must use a different browser (ie. (FireFox) in this case, if you want some of your traffic (ie. #2 favorite) is not to be smart tunnelees.

  I hope this helps.

• HP Pavilion DV7-4190us screen after login problems

  My system has a dual boot with Ubuntu 12.04 and Windows 7 Ultimate edition. When I connect to Windows, I get this screen

  This does not happen when I boot in safe mode or when I boot on Ubuntu. I tried to disable all startup, running Memtest and chkdsk, but nothing seems to work. For now, I installed the latest driver AMD Mobility in the hope of it settle things. Does anyone else have suggestions for me?

  Al Merci ot.

  Closing. True isolated problem.
  http://h30434.www3.HP.com/T5/notebook-hardware/HP-Pavilion-dv7-4190US-AC-power-grounding-my-motherboard/m-p/1759437#M78612

• RV 120W Wireless-N Router Firewall VPN: Blank Page after login.

  IE shows errors when connecting, and Firefox displays a blank page with 2 tables and nothing in the tables.

  I have it configured with the CD of my laptop, not my favorite way, but I use it, but can configure anything else.

  My firmware is up to date, but I can't update without control. Help, please.

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Normale Tabelle » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 12.0pt ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 0 cm ; mso-para-marge-gauche : 0 cm ; mso-para-marge-bottom : .0001pt ; text-align : justifier ; line-height : 150 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin; mso-bidi-font-family: "Times New Roman"; mso-bidi-theme-make: minor-bidi ;}

  Dear Sean,

  I have the same problem.

  Try to open the Site with the URL: https://192.168.1.1.

  This can help you!

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Normale Tabelle » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 12.0pt ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 0 cm ; mso-para-marge-gauche : 0 cm ; mso-para-marge-bottom : .0001pt ; text-align : justifier ; line-height : 150 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin; mso-bidi-font-family: "Times New Roman"; mso-bidi-theme-make: minor-bidi ;}

  Best regards

  Alex

• (Browser) clientless SSL VPN access is not allowed.

  I'm trying to set up an additional Anyconnect vpn profile.  I have one that is working properly but this news will not.  When I try to log in to download the client or try to connect with a computer that already has the customer I can not.

  The client side receives this error: "access (Browser) Clientless SSL VPN is not allowed."

  On the ASA journal:

  4 May 10, 2010 11:42:17 722050 group user <> IP <10.12.x.x>Session is over: SVC is not enabled for the user
  4 May 10, 2010 11:42:17 group 113019 =, Username =, IP = 0.0.0.0, disconnected Session. Session type:, time: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: unknown

  He does reference the main our ipsec connection group name.  I think it's very strange.  Here's the part of my config that treats the ssl client.

  tunnel-group type SSL - RDP remote access only
  tunnel-group SSL-RDP-Only general attributes
  address pool SSL_VPN_Users
  authentication-server-group FUN-LDAP
  Group Policy - by default-SSL-RDP
  tunnel-group SSL-RDP-Only webvpn-attributes
  enable VPN_FUN group-alias
  allow group-url https://64.244.9.X/VPN_FUN

  internal SSL - RDP group strategy
  attributes of SSL - RDP group policy
  value of VPN-filter RDP_only
  VPN-tunnel-Protocol svc webvpn
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RDPonlyVPN_splitTunnelAcl
  WebVPN
  list of URLS no
  SVC request no svc default
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389

  mask of local pool SSL_VPN_Users 10.12.20.1 - 10.12.20.100 IP 255.255.255.255

  Post edited by: kyle.southerland

  After reviewing the config, the difference between groups Anyconnect and SSL-RDP-Only is the AAA server.

  AnyConnect group uses the radius for authentication (RAS01) server, while the SSL-RDP-Only group uses an LDAP server for authentication (FUN-LDAP), and the configuration of the FUN-LDAP server, you configure the mapping of LDAP attributes, which is to map the group "An1meR0xs".

  To test, change authentication LDAP aaa RADIUS for the newly created group.

  Hope that helps.

• RDP ActiveX clientless SSL VPN on Windows 8.1

  Hi all

  I have A 5510 Sec with a clientless SSL VPN configured. We have a few pre-configured bookmarks and prevented users to open its own URL. We have RDP plugin installed rdp_09.11.2012.jar.

  When a user runs Winodws 8.1 clicks one bookmarks, they receive a message from IE that Java is not installed. In all other scenarios I tested (WinXP + IE8, IE10, IE11 + Win 7 + Windows 7), by clicking on the bookmark starts the ActiveX plugin.

  How to do this work on Win 8.1 + IE11? It feels like a setting of the client.

  Thank you.

  Hello.

  First of all, IE11 is not officially supported by the asa again.

  REF. http://www.cisco.com/en/US/docs/security/asa/compatibility/asa-vpn-compatibility.html

  But if you put the 'portal' in a compatibility mode you should be able to use the ActiveX again.

  In Internet Explorer click Tools and search for Compatibility Mode settings.

  In addition, you must use the 'Office' of IE version and not the subway.

  Best regards, Søren.

• ASA5520 and ACS 4.0 - AnyConnect WebVPN (Clientless SSL Tunnel) does not downloadable ACLs (DACL)

  I'm having a lot of problems called "Clientless SSL-Tunnel" AnyConnect VPN sessions - i.e. those that are enacted by visit https:// via a browser, and let the Java/ActiveX plugin will automatically run Fat Client AnyConnect VPN for you - downloadable ACL honor.

  Our installation is integrated via RADIUS Cisco ACS 4.0.

  Dynamic group-> connection profile strategy seems to work for either (direct according to AnyConnect VPN Client heavy or indirectly via a browser-> /Java Client ActiveX), however, our only downloadable ACL take affect if the user instantiates the SSL VPN via AnyConnect VPN Client Fat; first of all, users who access the site through the "Browser-> https://" route seem to have no ACLs applied to all?

  I understand that I can change the custom "Cisco VPN/3000/etc" parameters RADIUS, such as 'WebVPN-filters' and 'WebVPN-Access-List' to apply an ACL configured locally on the firewall of the SAA, but what I have to configure to make the sessions ' WebVPN/Clientless-SSL-Tunnel"to honor the DACL that sends our ACS?

  It is a known problem with some Software ASA Versions see bug cisco CSCtv19046 - DACL is not applied to acre during connection via the Web portal. You probably need to update your ASA 8.4 (4.1) or a later version.

• Redirect after Login

  Hello
  
  We have a problem were the end users save bookmarks in the application for a particular page. Ideally, everyone connects to the right page and is re-directed to the homepage. However if you save an incorrect URL address they could potentially open in a part of the application without going through the correct screens.
  
  You can apply a redirect to the homepage after login permanently?
  
  Concerning
  
  Kevin

  Hey Kevin,

  a declarative logic for this is actually on my to-do list for 4.2 (we cannot guarantee that it will be in the version, however).

  I think in 4.1.1 you could replace the FSP_AFTER_LOGIN_URL element in a procedure after the authentication, for example

  if instr(:FSP_AFTER_LOGIN_URL,'f?p='||:APP_ID||':1') > 0 then
      -- ok, we will land on page 1
      null;
  else
      -- deep link would redirect somewhere into the application,
      -- rewrite this to point to page 1
      :FSP_AFTER_LOGIN_URL := 'f?p='||:APP_ID||':1:'||:APP_SESSION;
  end if;
  

  Kind regards
  Christian

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• MBP running El Capitan hangs after login

  Today, my 2011 15 to the Macbook pro mid hangs after login to the admin account. The status bar does not appear, or the desktop icons. Nothing does, and I need to force the shutdown to be able to restart.

  These are the things I've already tried:

  • Restart in safe mode: the desktop icons will appear, but all crashes after a few seconds. I think since safe mode does not work, the problem with the Finder, DS_Store problem, icon, or a problem with iCloud. So I went to the next step.
  • Running the tool of first aid disk utility in OSX (restart + Cmd + R) recovery tools: it indicates that the drive is OK.
  • / Sbin/fsck - FY running in single user mode: the drive seems to be OK.

  I don't know what to try next. Since I really need my computer for the next few days, I could go to an Apple store later this week. Of course, I would be really happy to avoid the costs of this option.

  Anyone of you has an idea of what I should try next?

  What safeguards do you have?
  You have another account that works?

• How can I fix a trackpad that goes not responding after login?

  My laptop seems fine, but when I type my password in the log in part it then brings a picture to the top of a finger on a trackpad and a large red cross trhrough it. the trackpad becomes insensitive just on the profile, before it works fine.

  It's more like a player/software problem.

  Laptop you came with a player/software installation disc?

  After login you can use the keyboard (mainly via the tab key) and the (alt - tab shortcuts) to re - install mouse driver.

  You can also use an external USB mouse to do this as well if you have a.

• Blackscreen after login, even after the recovery of last hour of work

  I get a black screen after login. I've restored to know finally good days of work.  I changed the regedit to Explorer.exe shell, I still get the black screen. I don't have a recovery disk.  I don't know what to do next

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.
  
  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Pass parameters to URL AFTER Login page

  I send you a link in an e-mail to the partners which will lead them to a page with a SB access restricted to this topic. The server behavior restrict access redirects to the login page; which works very well. The login page works perfectly well.

  But the link in the email has two URL parameters on it, which is so that when the partner gets to the once connected landing page, these settings will filter the recordset and retrieve information specific to the individual and their contract.

  Problem: URL parameters appear to access the page with the restrict access SB on him (because they appear in the URL) and they were also highlighted in the URL of the page Login.php. But when actually, I hit 'submit' and connect, they are not passed that point to the destination page, so no information of the data table appears in the contract. I tried all imaginable combinations of recordsets and EEG and whatnot, and I can't get this look simple problem solved.

  Is there something unique in the connection or restrict access SB that strips the URL parameters?
  If so, how that overcome?

  So which cannot be overcome, how Session variables created by the operation of connection is used to extract the information from the data table?

  Interesting question. I studied the code to restrict access to the Page and think that this is the rub. What intrigues me is that you say that the variables are kept in the query string. They are not. The only thing that is in the query string is the page to which the user should be redirected after login. Fortunately, the solution is simple.

  Find the following section in the restrict access to Page code:

  if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
    $MM_qsChar = "?";
    $MM_referrer = $_SERVER['PHP_SELF'];
    if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
    if (isset($QUERY_STRING) && strlen($QUERY_STRING) > 0)
    $MM_referrer .= "?" . $QUERY_STRING;
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo);
    exit;
  }
  

  Replace all instances of $QUERY_STRING $_SERVER ['QUERY_STRING'] like this:

  if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
    $MM_qsChar = "?";
    $MM_referrer = $_SERVER['PHP_SELF'];
    if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
    if (isset($_SERVER['QUERY_STRING']) && strlen($_SERVER['QUERY_STRING']) > 0)
    $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo);
    exit;
  }
  

  The query string should now be kept intact when the user is redirected to the page of origin.

  I'll report this problem to Adobe.

  In addition, you can use find and replace to replace all instances of $QUERY_STRING $_SERVER ['QUERY_STRING']. If you're feeling ambitious, however, you can resolve this problem by modifying the configuration file that generates code to restrict access to the Page. In CS4 on Windows, the file you need to edit is C:\Program Files\Adobe\Adobe Dreamweaver CS4\configuration\ServerBehaviors\PHP_MySQL\RestrictAccess_main.edml. It will be in a similar situation in the Applications of Mac folder. Simply change all instances of $QUERY_STRING to $_SERVER ['QUERY_STRING'].

• Laptop HP 15-f1233wm: white screen after login on Windows 10 HP for laptop 15

  I get a blank screen after login. She wanted to do something. Can you help?

  Hello

  Thanks for posting in the HP Support forum.

  This issue would have occurred because of many things including the recent software updates, virus/malware, corrupted user account profile. To remedy, try this:

  1 Please, shut down the computer using the power button

  2. turn on.

  2.1 as soon as you press the power button, keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu that can resemble the following

  

  3. choose F11 on the keyboard to open the system recovery options.

  The computer should boot from the recovery partition various options you of recovery. Note that the F11 option will work only if the recovery partition is there (not deleted) and intact. From there on, you have prenty of options to choose from.

  Please, perform reset of Windows with the possibility to keep your files and save the settings.

  This will be "Refresh" your windows but will keep your files and some stuff in places

  Here are the details:

  > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  I would like to know if it works for you.

• screen HP pavilion g6 notebook pc black after login

  Black laptop HP pavilion g6 after login screen. I can use the Task Manager to use a limited number of files such as enternet and hp desktop please help...

  Hello

  If you're running Windows 8 or 8.1, try to use the Windows system restore to return the machine to an earlier point in time when it worked correctly - a complete guide on how to make of this (including a video preview) can be found on the link under the subheading: restore your computer when Windows 8 will not start normally (it's to halfway down the page).

  http://support.HP.com/us-en/document/c03327545

  Kind regards

  DP - K