Why my loading cursor won't go far?
For a month or more to anything, the little blue circle next to my cursor will not go away. I already ran the analysis antivirus, backup, delete the unessary, etc... My computer load also much more slowly than usual. After I cleaned the computer, he began to work much more quickly. However, it is not as fast as it was before that the problem popped up and the loading circle still. It's still there, event when nothing loads. Any suggestions on what I should do?
- After the download is complete, select autoruns & right click above
- Click on "extract here".
- on the extracted files, click on "autoruns" application select it & right clickand click on "Open or run" & click ok or Yes if the process of ptompted by an administrator to complete the installation.
- When that is complete, Open or run "autoruns"
- in the opened window, click 'all'.
- all programs that says 'file not found' select each & every one of them, click on one at a time...
- right-click, and click Remove & ok.
Do not hesitate to ask!
Tags: Windows
Similar Questions
-
How can I get my loading cursor to stop running? He has been running around in circles all day?
Hello
Please perform a hard reset first. A hard or forced Reset clears all the information in the memory of the computer which can restore the functionality. Reset your computer forces the system to erase and restore the software connections between the BIOS and hardware.
Please find the below steps:
Hard Reset a laptop computer with a removable battery
To perform a hard reset on a computer equipped with a removable battery, follow these steps:
- Turn off the computer.
- Remove the computer from the docking station or port replicator.
- Disconnect all external devices from devices such as USB, external displays storage devices and printers.
- Disconnect the power adapter from the computer.
- Remove the battery from the compartment to batteries.
- Press and hold the power button for about 15 seconds, remove any residual electric charge capacitors that protect memory.
- Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.
- Press the power button to turn on the computer.
- If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.
- After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.
Hard Reset a laptop with a sealed or non-removable battery
NOTE: Do not try to remove a sealed battery, as this may void your warranty.
- Turn off the computer.
- Remove the computer from the docking station or port replicator.
- Disconnect all external devices from devices such as USB, external displays storage devices and printers.
- Disconnect the power adapter from the computer.
- Perform button for your computer model by following the instructions in the following table.
If Notepad starts meet after a Hard Reset, but is still slow, please follow the steps described in the following document:
Improve the performance of the system without adding memory (Windows 8):
http://support.HP.com/us-en/document/c03340676
Improve the performance of the system without adding memory (Windows 7): http://support.HP.com/us-en/document/c01817290
Please select the document depending on the operating system on your laptop. Please make sure you follow all the steps mentioned religiously for best results.
If the two solutions above (Hard Reset and the Document above) do not, help us, please run a Diagnostic Test on the hard drive.
Test a hard drive from the BIOS: http://support.HP.com/us-en/document/c00439024
Screening of hardware failures (Windows 8): http://support.HP.com/us-en/document/c03467259
Please see the hard drive in the above document to test from the Hardware Diagnostic tools.
I hope this helps.
!------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------!
I am an employee of HP.
-
have subscribed to standard acrobat and when I tried the load down, I got as far as the screen of the installer to receive one or two percent and seems if being arrested have uninstalled nitro 9 and firewall does not prevent it
Hi Michael,
Try to download it from another browser.
Disable all third party such as antivirus spyware applications, and so on.
See the following link for download Acrobat.
https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html
Please let know if it works
Concerning
Sukrit diallo
-
Why does hotmail page won't load until I have change to Western Europe
WHY WINDOWS HOTMAIL DOESN'T DISPLAY EMAILS IN WESTERN EUROPE, IT LOAD IN UTF 8 I FIND I AM CONSTANTLY CHANGING CODING ITS A PAIN, WHY SE PRODUCT IF IT NOT DETECT THIS AUTOMATICALLY I AM RUNNING VISTA HOME PREM
Hello
Please repost in the forums specific hotmail link below
-
Why mozill firefox browser won't down load
I had the browser Mozilla Firefox / and still have Internet Exployer, Google, Yahoo, the problem is I've removed Mozilla Firefox, Control Panel, and then wanted to re - install. But I tried several times to re - install Mozilla Firefox, but there is something on my windows xp, stop the load down? Whenever I try to down load Mozill Firefox, down load pops up an error that say is not acceptable in low load, I tried to exployer internet, yahoo, google, and he refuses to complete the full instalation for me to use mozill firefox browser?
Hello rlombardi, check your firewall and your security software if blocks the installation, otherwise delete the C:\Program Files\Mozilla Firefox folder, and then download from http://www.mozilla.org/firefox/
Thank you
-
Why my cursor won't move on the login screen, how to solve this problem?
Hello, I have a problem connect now. I have an ACER 1420 G, everything works fine but when I boot up it seems normal until it gets to the screen I want to click on my user name, enter my password and login. MY CURSOR is Stuck, frozen, Imoblilized from here and I can't move it to select my user at this point. I can work around this F8 startup and select "disable driver signature enforcement". From there, it is normal, I can move the cursor and it's normal, allowing me to point and click user, enter the password and go from there. I have Windows 7, all my updates on all software including Windows. I would try to avoid reinstalling the OS from scratch. I checked the drivers on the mouse and they say the best choice, up to date and working properly, no way to get it back, either. System Restore didn't help because once restored, I'll forward installation updates, it gets stuck again... It started last week with the updates to Windows Update on 10/02/15, but I did a stupid thing and turned off the PC for updates in the middle of the installation, THEN I also used SlimCleaner registry cleaner, sometimes delete important data? I use a Logitech mouse M510, which is wireless and it works perfectly. I do not think that the mouse or its interface is the problem. Any suggestions or support at all would be so appreciated. I can't find this problem and especially solutions that work on the web, I have reasearched and Microsoft community was trying to help me too, but no result... Thank you!
IDigMyAcer,
Thanks, I realize that it might be a little bit of your time, but I want to assure you that we operate for you. I look forward to the next update.
-
Why don't IE11 won't load?
I just launched an upgrade to W7 using my o/s disc. I don't know what he has done all this time, but there is a strange result.
It has installed IE8, when I use gMail, translated by me being redirected to the HTML version.
I have tried (twice) to load IE11 and said that the installation was successful, but I still have IE8.
Do I or load Firefox?
Hello Vagulus,
Thanks for posting your query in Microsoft Community.When you install Internet Explorer 11 for Windows 7, the installation program attempts to automatically install required components. If this part of the installation fails, Internet Explorer will stop the installation process.So, I suggest you to check if this set of prerequisite updates is already installed. To do this, you can check the following link for the game of prerequisite updates required and check out them with the updates installed on your system.Prerequisite for Internet Explorer 11 updatesTo check the updates installed, please see the following link:See the Windows updates are installedAfter having opened the window view update history, you can check the number of KB of the prerequisite updates that are not installed and install them manually from the link previously provided.After you install the updates, restart the system and reinstall Internet Explorer 11 from the following link:Download Internet Explore 11If you still have the problem, you can follow the steps in troubleshooting as provided in the following link:Troubleshooting a failed installation of Internet Explorer 11Warning: Security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your security software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Hope this information is useful. If the problem persists, please post back your results, we will be happy to help you further. -
Illustrator keeps loading cursor and does not
Hello
I'm looking for more technical help on starting Illustrator because it does not work properly. When you start Illustrator, the loading symbol (the circle next to the arrow) starts flashing quickly. I can move the cursor and start a new document from the openingscreen, but cannot click after that. Also the key combinations do not work.
I checked for of programma old Wacom, but I believe that I have none. Just to be sure, I installed a different mouse, which changes nothing. I also started several times and used a cleaning tool.
Photoshop and Indesign work perfectly. It was the first time I started by Illustrator, so it didn't work before.
Someone at - it an idea on what is happening and what I could do to fix it?
Thank you very much
Marieke Jong
Well it seems that we have found a solution in this thread:
Re: The cursor flashes and deselects the menus
Try it, so far, it works for me
-
Why my IOS 10 won't open my free desktop
Why ARE my 10.2 Ops / s suddenly won't open my office free ap?
Ask the developers of the free Office.
also fwiw you can not run iOS 10 on a MacBook Pro so if you fix your signature is easier to propose an action plan when you post a problem.
-
Why not load most pages without stop and then reload?
most of the pages won't load. I have to click on the "stop loading this page" button and then on her reload this page to make it work. This must be done on most of the pages, but some work like www.google.com . I tried in safe mode and have the same results, this is not an add on. I am in class execution 23.0.1 not didn't have this problem until I updated to this new version.
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Why Chrome load websites faster than Firefox
I can load a website at least two times faster than Firefox Chrome. Why?
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
In any Web site and a Web page I can't click links/words up to 3 cm of the page. All below I can click on without any problem. Why is this happening? How should I do? I am not computer, so any help you can give me please answer clear and detailed steps. I tried to reload Mozilla Firefox but I don't know what he re - load this internet browser. I emptied my cookies, history and hidden. What is the problem? Why and how to fix it? Please help me urgently. Thank you.
The extension of the Yahoo! toolbar reported that causes this problem.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
Why Windows 10 IP won't allow installation of my purchased CD with Nero 7
When you try to install my CD with Nero 7 legitimate on Windows 10 IP, I get a message that there not right after the declaration of the wizard that is to install DirectX. And there is no selection to skip this step. I also found the reviews of Win10 a statement that said that Nero 7 works well on Win10. Why it does not install on Win10, but fits perfectly on Win XP, 7, 8 and 8.1? I had several programs that will install not on Win10. This could be a strong deterrent for users who want to spend 10, but won't because 10 will allow the installation of software, they are owners and used for years on other Windows OS, even the most recent as Win8.1.
DO
have you tried to install Nero in compatibility mode?
To install in compatibility mode do the following:Click with the right button on the installer > properties > compatibility > choose OS
() works under vista, win 7, 8 to win and win 10) -
Why labview load screw exe instead of vi.lib?
Hello
I have a small but annoying problem.
My project called an exe that we created using labview. In the project folder, there is the folder "SpectrumAnalyzer' with 'Spectrumanalyzer.exe '. Whenever I open my project, Labview is conflicted on the same screws 4 and wonder would be - it to load them from vi.lib or SpectrumAnalyzer.exe (screenshot attached). Why would he do that? How can I tell labview does not to load the exe witthin screws?
Thank you
Danielle
-
Why freeze my cursor? ___Why is my cursor freezing?
When I turn on my computer and go to my screen that everything starts to load properly, while the load of a little computer icons come with icons and it has a red X on it and as soon as it loads my cursor freezes and I can't do anything. I can't even turn off the computer, I have to remove the battery.
Help, please!
THANXHello
Will be starting the computer in Mode safe?315222 - a description of the start in Windows XP Mode options:
http://support.Microsoft.com/default.aspx?scid=315222In addition, holding the power button down for 5-10 seconds should do the same thing (a hard reboot) indented battery, but it is easier.
Don
Maybe you are looking for
-
Firefox played upwards, so it was deleted with the idea of re - install and obviously didn't anticipate. There is now no internet browser, so there is no way to re - install firefox. Does anyone have any suggestions?
-
On my iPod touch 4th generation | iOS 6.1.6 on the application of music, when I click on another, then Podcasts, no shows art, with the exception of "Monstercat Podcast". So is it possible to put the art in? Thank you Sam BTW I do not use the Podcast
-
How can I scan pictures with my c6180 and save on my computer?
I'm trying to scan old photos of my hp C6180 all in one to my computer or a flash drive, but can't figure out how. It does not recognize the flash drive and does not give me the option to save on my computer.
-
m tryin to install .net framework fx40_full set up its not to proceed with the installation so I can't add my ware course of cloud of gniit in my net book his roll at the time where I installed the configuration I have windows 7 starter 32 bit true o
-
I have to upgrade the ASA. Can anyone suggest me that it will be better or I have to go to 9.x or higher version of 8.x? I saw a lot of caveats resolved to 9.x, but a few caveats still there. I'm not able to differentiate these that you warnings are