Why my mouse and my pen are jerking around the sliders in the develop module?
I have a Logitech bluetooth mouse, Apple bluetooth mouse and a Wacom tablet. All these devices are jerking around when I try to use the sliders to develop. I can click on contrast and when I start to move, it will just move very fast then come back and I can't control it. When I click on, it remains on this issue and continues to move even when I try to click on another slider. I disable all but one device at a time, and it makes no difference. At all the most recent drivers. Have 50 GB of cache on its own internal 1 TB drive. Can live with shabby performances with brushes and tools, but cannot do much if you can't work the sliders.
I did it from the start, turn off all but one I would use. Tablet's intuos PTK640 old and verification with Wacom on a pilot as being more shown on their site. So, do not try to use it now.
Apple mouse now works normally. I saw an article on the deletion of a file in the library and let them rebuild on restart and did. Can be what makes the difference because I did nothing more to LR.
Mouse Logitech is always useless in LR. He's older, but a current driver. I think the problem is with the driver and not LR. It will replace and have another go at him. Apple mouse is not the best design for a work of LR. Hope I can get the tablet in game.
Thanks for the help and I will consider this problem solved for now at least.
Tags: Photoshop Lightroom
Similar Questions
-
All panels are missing in the develop module
Can someone help me. I've been using lightroom for a while. So today for some reason, not only has disappeared from my base Panel but also any other Panel under the module development disappeared so I can't even right click on say, the "tone curve" or the "Correction of the objective '' to bring back the base Panel because each Panel is missing. Can someone help me? I uninstalled lightroom and reinstalled but still nothing. I have no idea how to solve this problem.
Develop, press Ctrl + 1 (Cmd + 1 on Mac) to the base Panel. Then right-click (Ctrl + click) to select others.
Or use the window menu.
-
I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?
The difference between the raw edition photo and editing a PSD is that the PSD has black points and white pinned to the visible pixel values, the raw photo has still "headroom" with values of pixel darker than black visible and brighter than white, so when you export the raw file , there may be details that have improved (or obscured if it was another type of image) of the perception and mapping of the Compensation of the black spot on the final color profile.
This means not PS is better or LR is lower, it is enough for you to go to a different type of image. If you don't have PS to do final Assembly, you can probably do the same thing by exporting the raw in a 16 bit ProPhotoRGB TIF file, re-import this TIF and then set it LR, possibly using the tone curve to make the pitch black dark areas.
-
Close, minimize and resize buttons are inactive on the main window
My email client is the beta version of 41. I just upgraded the sys op to version 10 of Windows version 7.
The close, minimize and resize buttons are inactive on the Thunderbird main window when running on Windows version 10. These buttons are active on other windows such as the address book and new message. Ctrl W keys work on the main as Alt and then exit.
Is there a reason that the buttons are inactive on the main window?
-
Newsstand and new applications are available at the Canada? Icon 'see in the App Store.
Newsstand and new applications are available at the Canada? I don't see them in the App Store.
Not currently, but you might find some similar applications here > https://itunes.apple.com/us/genre/ios-magazines-newspapers/id6021?mt=8
-
I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?
Hello Lauren,
Please take a look at this Microsoft article on "networked printer troubleshooting:I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference: -
I have windows 8 is installed in my desktop pc
I want to move my account to GO to THE LOCAL because of user setting I m tried to synchronize my app Mail for new emails and other stuff his watch still unavailable then, opting for the account local affect current files and other documents are stored in the pc at this moment before I spend.Hello
Passage of the account Microsoft local account will not affect your personal documents saved on the computer.
Reference: http://support.microsoft.com/kb/2782145
It would be useful that you could provide more information on the problem faced with synchronization.
-What is the exact error you get when synchronization Mail app and other apps?
-Do you use all parameters of proxy to access the internet?
-Remember to make changes before the show?
-What anti-virus software is installed on the computer?
If you encounter the problem of synchronization with all applications, then I ran the http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab Apps store
Navigate through the steps mentioned in http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app
Check if you have any proxy enabled. If so, then delete it.
a. open Internet Explorer.
b. click on tools and select Internet Options.
c. click on connections.
d. click on LAN settings.
e. remove the check mark next to proxy server.
f. click OK and check if you are able to synchronize emails.
If none of the steps work, try to remove the account from the messaging application and add it again and check.
Go through http://windows.microsoft.com/en-IN/windows-8/mail-app-faq
Hope this information is useful. Let us know if you have any questions.
-
Hi all
We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.
Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?
I did a POC sample on it. I can share with you. I can't put in my dropbox because dropbox is blocked in my network. Share your email. I'll send the POC through
-
Why so slow and fat out put for only the clip size small 1 sec?
Why so slow and fat out put for only the clip size small 1 sec?
Hello
I just apply simple ray tracing 3d in AE and then try to make it by media encoder
Meia encoder says 4 hours so he could make
my clip was 15 sec not hd (I do not change all of the settings in media encoder to make)
then I cut it to 1 sec encoder media took 20 minutes to make
out put
4.12 MB
.avi file
1 sec
Why what is happening
This only happens when I apply ray trace 3d not for others
Thank you
As they say - "a picture is worth a thousand words" thus:
This is a screenshot of the small video clip (full HD) with curvature layer with RayTracing (see render estimated times):
And the same video clip with 3D classic (without RayTracing) and effect of Warp Mesh (rendering was so fast that he even showed no estimated time - but you can see the final rendering time):
So you almost 1, 5 h with RayTracing vs 11 dry without.
-
I need the English version of Photoshop and Lightroom. The problem is that I live in Barcelona in Spain and Suffolk, Virginia. My Bank and credit cards are all in the USA. How can I set up the plan of photography. I want to pay the price of the English version.
Hi Larry,
I see that you have you have a creative with email even cloud as with forums account and some countries such as the Spain.
To order the creative cloud with a credit card the United States, you must have an Adobe ID with United States in your country.
The country store & the Adobe ID, payment details must be same.
For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:
Change the country associated with your Adobe ID
If you wish to contact our support group for assistance, please visit this link: (be sure to connect to adobe.com with your Adobe ID first)
CC_membership-account-payment-support
Hope this information is useful.
-
I love the develop module, but I'm doing something wrong in the library
In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr. Please help (PC user)
And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.
Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.
-
When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task. I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7. Why hang up LR
Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.
-
I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?
Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom
You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.
-
First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP
Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...
Mylenium
-
I can´t start the develop module.
He says that I need to renew my membership. I purchased the complete program and when I connect it says that I have a free subscription.
With the help of:
27 "IMac
10.10.5 OSX
Norway
Hi,
Please see CC help | 'Renew your membership' window appears when you launch an application Cloud Creative
Kind regards
Sheena
Maybe you are looking for
-
The compatibility WIN10 check me has informed than our desktop Compaq Presario CQ53320F with integrated NVidia GeForce 6150E nForce 430 graphics and 3 GB ram running WIN7 required updates for WIN10. It is the child, not a player - computer and I alre
-
G62Notebook HP G62-341NR PC: G62-341NR
The problem is that the video light keeps going on this unit. Actually I Can shine a flashlight and you can see what is on the screen, but it's as if there is a blackout on it. I don't know what the problem is or how to fix it. He does intermittently
-
Access to the COR to two XP systems behind a router with a single public IP address
Hello is it possible to access the RDC to two XP systems, with two different port for the DRC, behind a router with a single public IP address? Please note this ia a small home network without any parameters of the field. I use IP to access DRC. You
-
What is Akamai NetSession customer? Is it safe? Is good to disable it from starting Windows?
-
Hello I use the code below to save my data. At first, I think that when the persistence store is small, it works well (as debug info 1 shows). However, I think that when the persistence store is big enough, it manages the persistence store very frequ