Why my printer HP Deskjet D1415 printing used series?

Similar Questions

• Why my printer used to print Portrait

  Whenever I have reset the printer options to will always print in landscape when I set it to Portrait & clicked OK?

  Whenever I have reset the printer options to will always print in landscape when I set it to Portrait & clicked OK?

  What printer you are using (brand and model, please)? Have you tried to print larger program? It print in landscape form all programs, or only some? What programs does it print landscape? Exactly how you define this portrait?

• Why my printer used to connect to internet?

  my wireless printer was working fine, then wireless lights began flashing.

  Tried to remove and re-add them, but has still no internet connection.
  Hello
   
  -You try to configure a shared printer?
  -Is the printer is detected by any computer or router?
  -Have you tried to install printer manufacturer drivers?
  -What is the brand and model of the printer?

  -What is the operating system installed on your computer?

  -You are aware of any changes made on the computer before this problem?

   

  Method 1: Run the FIXIT from Microsoft from the link below and check if the problem persists.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: Turn off the Antivirus /Firewall
  I suggest to disable the Antivirus/Firewall temporarily, then check the issue.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3: So I recommend that you follow the steps from the link below and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For reference:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

   

  Hope this information helps.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• HP Deskjet 3520: Printer uses a different color than the original

  Although I have a lot of little black ink low on color my impressions are coming in red now in yellow instead of black and Red

  Hi @Deborahdebster

  Welcome to the Forums of HP's Support.   I understand that when you print using your printer Deskjet 3520, a problem of print quality with regard to the colors.

  I've included the document to solve the problems of quality Print to the HP Deskjet 3520 and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series . There the steps you want to fix the problem of print quality.

• DeskJet Ink Advantage all 1515: 1515 printer use INK 61

  I thought badly of my printer model that I have tot of 1510. So I 61 ink provider. So I installed the INK, but it is unusable, it showed the error message on the INK. So I'll watch on my printer model which is hp 1515 and it's use of the 678 INK. == I was so sad about this. So I came here to help is anyway to use the 61 INK on my printer 1515?

  Hello

  HP Deskjet Ink Advantage uses only 678 ink cartridges in your country:

  http://support.HP.com/us-en/document/c01766411

  HP 61 ink cartridges are intended for different printers and can not be used with your printer.

  Kind regards

  Shlomi

• Why my printer dell 968 of the internet feel used?

  Why my printer dell 968 of the internet feel used?

  Internet Explorer 9.0 was the problem.  When I tried to print it sounds internet has stopped working and then would not print.  I removed 9.0 and reinstalled the 8.0 and the printer works fine.

• experienced problems for a HP Deskjet 1000 c printer to print using windows 7 64 bit

  One known problems get a HP Deskjet 1000 c to print using windows 7 64 bit. I have updated the drivers for parallel port and a printer. the computer recognizes the printer is there, but no documents will print.

  HP provides the drivers or software for this printer.

  It uses the built-in drivers obtained through windows update

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03460648&CC=UK&DLC=en&LC=en&os=4131&Product=61601&sw_lang=

  If your PC does not have a PARALLEL port and you use a converter, this method is often problomatic

  If your PC has a parallel port, then the motherboard must be of an age that is probably not entirely compatible, not with orders other bottlenecks card mother win7

• HP deskjet 1000 do not print using windows 7 How to the printer driver

  My hp deskjet 1000 printer do not print using windows 7 How to the printer driver

  It worked before on this PC?

  Full features drivers are here, select the bit version correct victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4066377#n187

• Line bottom of texts and borders are cut off when printing using HP Deskjet 2060 on Windows 7

  I kept getting a cut of text to the bottom line of the borders, notes and even pictures when printing using HP Deskjet 2060 K110a on Windows 7. I tried the solutions on the web and it does not work for me. Can someone help me with this problem please? I bought it just yesterday and I'm surprised with one such problem occurred, as it is always new. Thank you.

  It is usually only for a problem in Windows Vista, but it comes up in window 7 at any time.  The document below the link is designed to solve the problem in Windows Vista, but it should work on Windows 7 as well. Let me know what happens.

  http://support.HP.com/us-en/document/c01672454

• Why my Epson Workforce 630 does not print using my Windows 7 computer?

  I have a printer Epson Workforce 630. All cartridges are new, just replaced. The ink levels are normal on the printer and it prints documents audit nozzle locally and my small laptop running Windows 7. It is also used to print from my desktop Alienware x 51 running Windows 7. My computer is connected to Ethernet and the WiFi printer to print. This is not him point because I've had the same setup for over a year now, and that worked before. The printer is recognized on my computer. I can ping on command prompt, sign in to Chrome and it is listed as being active in my list of devices and printers. I can't print in WiFi or USB. When I try to print wirelessly, it merely display the normal print screen, no errors. Then after a few minutes, I check the print queue, and there is an error - printing... from the state table. When I connect via USB, it gives me an error of communication. Here is a good list of things I checked:

  • I checked the control panel of Verizon. The printer is active and online.
  • The printer WiFi light is green.
  • The printer has ink Epson and can print locally.
  • The printer can print from another wireless laptop and a USB connection (running Windows 7, same as my Alienware x 51).
  • The printer used to print on my current configuration of the office.
  • The printer returns the packages when ping via the command prompt.
  • The printer can be connected to the use of the local address that is located on the control panel of Verizon via a web browser.
  • The printer has a large green checkmark beside him in devices and printers and is listed as being active.

  Here is a good list of things that I tried to solve the problem:
  • Uninstall and reinstall the latest drivers for the printer (several times).
  • Connect via USB and have Windows 7 trying to print via USB. Communication error.
  • Turn off the printer and turn it back on.

  Here is a list of the things I'm doing which could have caused the problem:
  • I joke with the rules in the port forwarding Verizon Control Panel. I deleted a bunch, a few months ago. However, other printers can print, so I don't know.
  • I fiddle around with regedit, and I defrag my registry of every day. Could it have caused the problem?
  • I have a lot of process stop and disable services that I have no idea about.
  • I delete the files I'm not familiar with.

  Any ideas?
  Thank you!

  Hi carbon,

  As he did not work in the administrator account, we need to repair the operating system files.

  You can perform in-Place Upgrade (repair install) and check.
  The detailed procedure is suggested in the following link.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps!

• Cannot print using Smart web page printing

  Original title: "Smart Print", for the printing of web pages appear not at all smart!

  Why become impossible to print using "Smart Print", a plug-in without doubt, for the web pages, only a portion/fraction of all KB Article ID 255867. of Deskjet 810C WS ' XP?

  Hello

  1. what web browser do you use?

  2. in case you are Internet explorer, what version of Internet explore is installed on the computer?

  You can try to uninstall and reinstall HP Smart printing and check if that helps.

  See the link below for more information on HP Smart printing.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01812475&CC=SG&LC=en&DLC=en#N491

  http://WWW8.HP.com/us/en/partner/Microsoft/Bing-bar-for-HP/Smart-print.html

  You can also post the question on the link provided below for assistance.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports