Why my text block go dark?

Similar Questions

• Why the text block to base lines

  I text with an applied object Style boxes, and the Style includes among the basic framework, Use Custom basic text Options Grid.  Here are the pictures of the parameters and results.

  

  It's a paragrph attribute: snap to grid.

  There is a button for this in the panels and paragraph control (for the selected text), but it is better, like Bob, to add to the paragraph style to the paragraphs that need to be aligned on a grid.

• Text blocks to move when I write my site only in Chrome and Safari

  Blocks of text in my house and change shift down low on the page but it does not seem that bad in Chrome and Safari.

  Anyone know why my text frames evolve?

  Here's the url:home

  Favorites icons or favicons are stored in the cache of your browser.

  Delete your old favorites (bookmarks) icons and then reapply so the new favicon can be added to the folder of your browser favorites.

  Close IE.  Restart IE.

  Finally, it will be displayed.

  Nancy O.

• Why add text in a text box scale objects below it.

  Y at - it an option to prevent this?

  Here is a screenshot before that I'm trying to add text.

  

  and after I add text it resizes objects in the background.

  

  These objects are not grouped or link, so I do not understand why it would impact them. Help, please.

  Remove empty carriage returns after the text in the text block. (Click on the insertion at the end of the text. Then arrow down until you can not arrow down more. Then press the delete key until the caret upward at the end of the text.) Blank lines are forcing the text block to grow to make room for them, which in turn causes the rectangle behind to grow.

• Why my text FADE at the end I RASTERIZE it?

  If someone could answer this question for me,

  be great!

  Why my text darken once I click outside the ants scrolling text box?  And then why get even darker once I rasterize the text layer?

  It's confusing to me and I am sure that the answer is obvious...

  I have ATTACHED a picture of my question...

  THANKS for any help!

  Dan

  

  You view your document at a resolution of zoom-out.  All view with zoom is an approximation, and sometimes this approximation is big enough.

  Try to view the image in zoom 100%.  You should find that there should be no difference pre and post-pixelation.

  -Christmas

• Why the text moves to the new location? [CS6 - jsx}

  I want to spend paragraphs under selection in the new framework. I have:

  var mText = app.selection[0].texts.itemByRange(app.selection[0].paragraphs[0].texts[0], app.selection[0].paragraphs[-1].texts[0]);
  var mFrame = app.activeWindow.activePage.textFrames.add();
  mProgn.geometricBounds = Array(94.5, -20, 92+10, -20+100);
  
  for (i=0; i<mText.paragraphs.length; i++){
      mText.paragraphs[i].move(LocationOptions.before, mFrame.parentStory.paragraphs[-1]);   ///'invalid parametr 'reference' or method 'move'....
  }
  

  Why?

  Thank you.

  Your mFrame is newly created and has not yet paragraphs. If you

  cannot be said of the mFrame in paragraphs [-1].

  However, try mFrame.parentStory.insertionPoints [-1] - I think that a new

  created text block always has 1 insertion point.

  Ariel

• Text wrapping moves the text block

  Hello world. I have a block of text on my page and a picture frame sitting in the upper left corner of the text block. I want my text to wrap around the picture frame, so I have the text wraps not lit. However, skin moves the entire text block to the right instead of just the text inside the frame. Is it possible to avoid this? InDesign CS for Windows 6. Thank you very much.

  -Rick

  Nevermind, I figured it. The text block was at anchor, and that's why the frame is moved to the right. I'm sorry for the noise of the useless list.

  Rick

• Why this text does not work well?

  Hi guys,.

  I am having trouble with this text.

  http://www.pixentral.com/show.php?picture=1y1N3lL5KPRBejo9GlPhEdkpl4KDQe

  It's in a column and the text block ends with the word 'amorosa '. I don't know why in the text the word "looking" will move to the next line and can only be inserted after that «nostalgia DEL...» "line of text even if ups with the end of the image apparently large enough to hold.

  http://www.pixentral.com/show.php?picture=1nu94bPp66d7lumber8SBjn6eI7Z1

  Maybe there is a better way to work with tabs, avoiding the list and so forth, but so far I have not understand it... so I work with the tools I know.

  Thanks for any info!

  See you soon,.

  SEBS

  Most importantly, you should do in this file is to remove all the keystrokes unnecessary (circled in red on my picture).

  

  You only need a paragraph return after caida, a tab after Coccoz, a tab after Catalanand without tab in the 'second paragraph' text (such as after del), and you do not need a line break after amorosa.

  After you have removed all the junk, set a tab on the left for the "second column and take note of its position." Suppose that you assign the p180 tab. To do the hanging indent, set the left indent p180 and first line indent to-p180 (i.e. negative 180 points). In this way, all text will be in the "second column", except the first line of the paragraph, which in this case are the names that make up your "first column". When you are ready to start with a new name, it's when you need a normal declaration.

• With security enabled parental filter, why Google is blocked?

  I am forced to use Bing to do research on the net, Google is completely blocked. I used Family Safety Filter for months without this problem does anyone know why the change suddenly?

  I hate to say it, but it looks suspiciously like Microsoft attempting to block its main competitor on the search engine market. Surely, this would be illegal? Please don't answer and tell me to add an exception for Google. I want to know WHY his suddenly blocked, not how yet ANOTHER clumsy and annoying work around.

  This isn't just a minor irritation, my family needs to use Google Maps and Google Mail, so Bing does not replace.

  You can perform a system restore to when it was working properly, check if it works as expected.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If this does not work, check your settings and if necessary, add the site to the list of trust as you mentioned in your initial post.

• Rotate the text with the character within the text block style

  I would like to apply a paragraph or character style to a certain character in a text frame. I would need to rotate 90 degrees in the framework, separate from the other text. Is this possible?

  Insert the text block in the block of text as an anchor and rotation you need.

• How to put a new line in the text block using jsx?

  Hello guys,.

  I am concatenating the content of the text block using two JSX, but I want separator as a new line. I have tried \n but does not work please help how to do that.

  var  seperator = "\n" 
  frame1.textItem.contents + seperator + text;
  

  Hi UpendraSengarr,

  Try this:

  var frame1 = app.activeDocument.activeLayer;
  var  seperator = "\r";
  frame1.textItem.contents = frame1.textItem.contents + seperator + "text";
  

  Have fun

• Tutorial of the postcard - can't get the new text block started

  It is a very basic question. I do the tutorial of postcard. I'm unable to get a second text block began on the front of the postcard to the time of the event. I take the text tool and drag it, but it does not create a new text frame. He thinks I want to type the information in the context of existing text.

  I hit escape repeatedly to try and out the first block of text, clicking on the tool text several times, tried shift and click, put the date in a Microsoft Word's doc information and then tried to 'Place' - all to nothing done. How can I get the file to understand that I am creating a second block of text?  How to get out the original text block?

  This seems to be a problem for me, I can't "uncheck" any tool path - by clicking on another tool or hit escape. It does not work. I close the file, then open it new in order to use a new tool. Very frustrating and time-consuming. I work under Windows, if that helps.

  Thank you.

  Try to zoom a little and start your slide text tool starting off the page on the region of cardboard. Using the black selection tool, you can drag to the page and resize it using the bounding box handles.

• How to bind the text blocks between pages?

  Hello

  I searched all autour for this, and I'm guessing that the answer could be so simple that no tutorial it doesn't even mention:

  How can I link the blocks of text between pages? I made a block of text in each master page and then connected one left with the one on the right. Indeed, all of the text in the document is linked from the page on the left of the right-hand page. But how do I link the page on the right with the following two pages 'below' in the document?

  If I'm not clear, here is another attempt to explain: I'm going to insert a lot of text in a document, and I already know the size and the type of text block, I want the text inserted. When I put the text in the left side, it connects (goes on) the block of text on the right side. But it stops there. So I have to manaully through both pages, which connects the right page "at the top" with the left 'below', page by clicking on the image by clicking on the small arrow in the lower right corner, and clicking on the next page below. There must be a way to organize it in master pages or in some other way?

  Thanks in advance for helping me with this problem of small size, but huge!

  Best

  Kim

  Two things...

  For "automatic formatting" to work with Captain linked frames page, you must NOT release the Master frame before placing the text, and you must click inside the image area, not any sort of guide.

• text block, no packaging, moving up like browser width decreases

  Hello

  I have a block of text in one of my breakpoints, that, when I adjust my browser window to check collisions, etc., he dresses not and moves upward into my position.  on all other breakpoints, wrapped as it should, and other blocks of text on the BP even behave as they should. I even tried to delete the offender and copy of text blocks in the operation, but he always does.  Any thoughts?

  See you soon

  06:00 here...

  delete the image under the text

  Insert a slider widget to empty library instead of the drop down menu on the right

  remove the arrows, next, previous etc just make a single 'keeper' for the image and add images in the widget

  size on page etc as the original image. Make sure that you use the layers panel to organize the slider under the text.

  which toured... I can send you your original with the change file if you are having trouble... nice site by the way.

• Muse: Text blocks the lower graphic States

  I created buttons with rollover States: Normal with a 30% opacity. Rollover, Mousedown and Active: shadow 100% more drop. It is related to the landing page. So far so good.

  I want the text for each button to be 100% opacity all the time (he has a shadow too) so it is easy to read (not spent 30%), so it is in a separate text block, also linked to the landing page.

  

  In preview mode, when I rollover, mousedown, etc. the button background works as it should (go from 30% to 100%).

  

  Until he hits the block of text. He text block "shields" (for lack of better term) the State and the button returns to its Normal state:

  

  I tried to solve this with layers without result. So... my question is the following:

  How can I get the text above the button in a constant state of 100% and do not have the text block are interfering with the States below.

  Of course, I forgot something. What Miss me?

  Thanks in advance.

  The easiest way to do this is to use the "status button" comes with Muse widget.

  Here is a small tutorial: The Mighty State button Widget - Video Tutorial - MuseThemes.com - YouTube