Text wrapping moves the text block

Similar Questions

• Breakpoint - not able to move the block of text at a breakpoint

  Adobe 2015.1.0.2309 Muse.

  I have a few breakpoints set on my page. When I jump to one of them my expectation is that I'll be able to format the page for this breakpoint.

  I want to move a block of text right of a picture to a picture below when I get to a certain page width. If I click on the breakpoint for the width of the page, but when I hover over the text block I have an icon that says 'Click to go straight at the stop'. When I rubbed it in my larger page break.

  Starting point:

  

  I want to move the text under the image block when I'm about to stop 750, so I post the width of the page at 750. However when I place the mouse on the text block I just get the message "click to go directly at the breakpoint.

  

  If I click on the Muse goes back to as in the first photo.

  How can I actually select me the text block, so I can re - position?

  Hello

  Screen captures, it seems that you have created the breakpoints on the master page. Master page breakpoints do not automatically carry over ordinary pages; You must explicitly create (click on the white triangle on the breakpoint bar to go to the location of the main breakpoint and then click on the button '+'). Once you have a breakpoint on the regular page, you will be able to replace the text block as you wish.

  I hope this helps.

  Abhishek

• Move the text block

  How to move the block of text to a specific page in indesign using javascript

  HI Mani mohan,.

  Here's the script that moves textframe first of the first page to the second page. Hope this helps you.

  var doc = app.activeDocument;

  var txfm = doc.pages [0].textFrames.item (0);

  txfm. Move(doc.pages[1]);

  Kind regards

  Cognet

• Text in the text block moves

  I hope someone can help me with this-

  When I move my block of text around the page, the text it contains moves around the frame.  When I select and drag the box, the text inside flashes on and outside.

  It started just suddenly happening when I created new blocks of text.  Existing text frames in the document don't do that.  I tried to compare the text of the new block and existing options and nothing seems to be different.

  Help, please!

  It sounds as if your new blocks of text are set to "Align the base grille" - take a look in the lower right of the paragraph Panel when you have a text problems selected frames. It is possible that you inadvertently click the button "Align" with nothing selected, making it as well as the default for new text frames.

  -Bill

• Move the letter outside the text block

  Is it possible to move a letter outside of text without text block movement.

  

  2 grep and regex 1 styles!

  styles 2 char:

  

  

  With 2 grep styles paragraph style

  WARNING: / / 1: ^ normal-space / / 2: ^ normal-space\K.

  

  A regex:

  WARNING: / / find: \r (? normal space) / / replace with: $0normal-space

  

  

  

  Cool and easy!

• Text wrapping will not be in the text block

  I am changing the content on a block of text in Illustrator using a JavaScript file.

  My method is as follows:

  changeLayer = doc.layers.getByName(textKeys[t]);

  changeLayer.textFrames.getByName(textKeys[t]).wrapInside = true;

  changeLayer.textFrames.getByName(textKeys[t]).contents = textArray [textKeys [t]];

  Basically, I set wrapInside to true and then I replace the content of the block of text with a string.

  However, rather than the text as you wish, Illustrator print everything on one line expands the size of the text block (and sleep) to adapt the text on a single line. Even when I put explicitly the width and height of the image in the script, it shrinks the text to fit on a single line in the rather enveloping framework. If I explicitly set the size of the police he then extends the framework once again, but only on a single line. Any ideas? Thanks in advance.

  Good evening

  Don't forget that you have different types of linked text frames. In vba, you can find the property THAT allow you to show that read only 3 types of text frames aiAtraText, aiPathText and aiPointText

  Patrice

• Problem with the text block, put in place when it is used on the page number marker

  Hello!

  I would use the text block on the marker page number on the master page in Indesign. The text block should change width when increases the page number. It does not work. What happens is that when the number of page moves a two-digit figure, the numbers tightened itself (compressed on top of each other) and the block of text changes size unless I drag on it (which means I have to manually unlock the master page first).

  I'm doing something wrong, or is this a bug?

  Thank you!

  Altogether! So, you can use a rule of Pará to simply do it!

• Eratic behavior: book, the main text blocks and Cross References

  I'm on InDesign 2014.2. Mac.

  I'm working on a fairly large book. About 14 chapters / sections, about 400 total pages. There are also hundreds of cross references, almost all of them to anchor references.

  The design of the book is as simple as possible. There is no graphics, text blocks only.

  I use a single master page, with facing pages, and a block of text type. I used it throughout the production of the book, and the primary text flow worked well, chapter after chapter. Pages have been created automatically, and automatically flowed text.

  Maybe I need to change the page size of the book, and I also have a lot of editing to do which will reduce a lot of the chapters. I wanted to make sure all pages use the main text flow to do that, go as gently as possible.

  To my dismay, I discovered that although I used systematically throughout the book master text streams, all but three of my chapters have inexplicably lost their text stream. All images in these chapters have converted into ordinary images. That I edit the book, it's playing havoc with paging and referrals.

  I tried to restore the flow of text in one of the first chapters. It's easy to do, in theory.

  • Move the first page off to the side frame
  • Delete all pages except the first page
  • Command-shift-click on the first page to restore the flow of the main text
  • Copy and paste the contents of the old frame into the primary stream restored.

  
  

  When I do, the pages to move properly, and I'm back to having a chapter with a block of primary text on each page. Unfortunately, this breaks all cross-references that refer to this newly reorganized chapter and all references to the front in this chapter.

  
  

  I tried to do all that I could imagine. Only remove the frames and not pages. Try without the busy book. Nothing works. I tried the command update cross-references in the book menu. Has nothing.

  
  

  It seems impossible to redistribute the text in a new primary master framework, without completely breaking the cross references.

  I finally found something that seems to work:

  • Create a new master page at the end of the document.
  • Go to the last page of the history of the chapter and the last history image a link to the text block type on the page that you just created.
  • In the pages palette, delete all pages in the document, with the exception of the master page that you created.

  All text will be redistributed within the frameworks of masters, and cross-references (to and from the frame) seem to be intact.

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• Resize the text without scale text block

  Hi people,

  Is it possible to resize a text frame without scaling the text in the 2014 AI CC SDK?

  I'm working on an AI CC 2014 plug-in and need to resize a text frame without scaling of the text. However, I'm not having a bit of luck to find how to do this. Is what I want to resize the text block in the Type area Options Panel makes, but I'm not able to understand how what classes/methods it uses, or whether they are still exposed in the SDK of.

  I tried to use sAITransformArt->TransformArt(), but I can't find a way to stop the text to scale with the text block. I considered, after processing, reformat the text which has been nationally, but that doesn't seem right.

  My current thinking is to move the text of the framework which should be scaling in a new block of text size correctly, and then delete the existing framework, but before that, I thought I would ask here see if do I it's harder it must be because I'm missing something.

  Thanks in advance for any help!

  See you soon!

  -Jim Birkenseer

  You must use sAITransform-> (TransformArt) on the subject of track of the image of the text, not the entire text block.

  For example:

  AITextFrameType textFrameType;
  sAITextFrame->GetType( art, &textFrameType );
  if ( ( textFrameType == kInPathTextType ) || ( textFrameType == kOnPathTextType ) ) {
      sAITextFrame->GetPathObject( art, &art );
      AIRealMatrix sMatrix;
       // Set your matrix as needed here...
      sAITransformArt->TransformArt( art, &sMatrix, 1.0f, kTransformObjects );
  }
  

• Text block does not move

  Hi all

  I am new to indesign javascript and try to move the block of text at the top of the page by using the underside of switch command.

  myGraphics [j].parent.move [myY1, myX1];

  But unfortunately, the frame is remaining in the same situation and that I must achieve in Image set up float tool.

  I'm trying to move the block of text at the top of the page since the need to place the images at the top and bottom of the page.

  It's case of bottleneck and the last 3 days much struggling to get this scenario.

  Any help is greatly appreciated.

  Thank you in advance.

  Kind regards

  Rani Sathya M

  Hi all

  I found the solution through this link.

  http://forums.Adobe.com/message/4463129#4463129

  Thank you for your support.

  Kind regards

  Rani Sathya M

• InDesign CS3 text wrapping text blocks

  This should be easy, but I can't understand it. All of a sudden, every new text block, I create includes text wrapping. How can I stop the text of packaging on the new text frames?

  With nothing selected, disable the text wrapping in the Panel text wrapping. In InDesign, default values are set by making a change with nothing selected.

• Master to the Page header text block

  Hello, I'm new to indesign and using CS4.  Sorry if this is a newbie question.

  I create a pdf of the digital presentation and aligning.  I want to create a consistent header on every page in the upper left and ensure that it is in the exact same on each page.  I also want to make sure that the size of the text, the police and the color is consistent on every page.  More important still, if I need to change anything, say a police, I want to only do it in one place and not do it on all 20 pages in my document.

  My understanding is to add a block of text to the master page.  However, how can I change the text on each page and have it not show on my front page which is page 1 of my document?

  Thank you!!!

  Create a text frame on the master page (if it is large enough and deep enough for the longer title)

  Insert a generic text like "topic".

  Give it a paragraph style

  Adjust the style of paragraph to your taste

  Go to each page you want to change and SHIFT CTRL (cmd on mac shift) and double-click the "topic".

  Change the text to what you want it to look.

  To change the color/font of text etc for each of them - adjust the paragraph style

  To change the text style for each of the headings so they are different in terms of colour etc - just change the color of characters via the color chart.

  If you do this, then all changes to the paragraph style must follow through on all pages - except where you may have changed the color of the characters (or any other change adjusted by hand the text.

  Also - if you move the text frame on the master page they should all move on corresponding pages, if you have not moved the hand on the actual pages.

• Display no text wrapping in the design editor

  Hello all!

  Something happened to the HR and when I look at the Design Editor, dressing is is more the way that it used to and I have to constantly move the scroll at the bottom of the interface bar to read what exists on the far right of the screen. (I mean not the feature of wrapping text around a graphic.)

  I have no idea of what has past, its been like this for a few days.

  I wish you to see my entire topic in the design editor without having to use the scroll bar! It's a lot of time and a little awkward.

  I would really appreciate the help...

  I use the 8.02208 Version.

  Hi and Hello

  Maybe your zoom has a value greater than 100%?

  Take a bow

  Willam

  This email is personal. In our view, full disclaimer, please visit www.centric.eu/disclaimer.

• Help using Léonie / old Toad move the text of "Key words" in "securities".

  Need help to use leonie / old Toad move the text of "Key words" in "securities".

  I have about 30 000 images with keywords but NO Title.  I want to move / copy the text in the keywords section in the section of the title.

  So, I tried this Script: Add keywords to title - Script of Léonie field

  He did a little work, but not completely.

  When I select an image in Photos, and then "Get Info" I'll see below in the title area, notice that the first two lines are the same.

  IMG_2621.JPG

  IMG_2621.JPG

  March 12, 2014 14:23

  My keywords are: Experimental engine 17 to 600 hours

  AFTER I run the Script, I get the following:

  IMG_2621.jpg - 17-600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I need is:

  17 to 600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I do not understand why the Photos shows the name of the file twice.   These fields are not labelled, but I was under the impression that the top line was the Description, the second line is the name of the file, and the third line is the Date.   Because only the first line is displayed under thumbnails, I try to have as much descriptive information appear in this area (as in the past, we could do with iPhoto or Aperture).

  In other words, when I run the script I hold my keywords to replace everything in the top line completely, eliminating the name of the file. Is there something wrong with this approach?  I would still have the name of the file to the second line, right?

  Thank you.

  Remove the file name of the title field, and then run the script. You will have the chance

  -17 to 600 hours experimental engine

  You can manually delete the "-" at the beginning or modify the script.