Why my transitions display the wrong part of the clip?

Hello

I work on a short film and succeed with several of my transitions. After you change the sequence in the first, I made color calibration via the direct link to SpeedGrade. The Lumetri of Speedgrade effects are applied to an adjustment layer on a track separate above original video clips. If I have problems with transitions (all cross dissolves) in my calendar. When one of them, they are all transition at a later stage in the second clip. As soon as the transition ends, it cuts to the appropriate location in the second clip. I hope that makes sense. If I disable the adjustment layer, everything seems well (other that the notes are not visible, of course). Remove the piece of the transition adjustment layer eliminates the problem, but there is an obvious reduction of the previous year to year.

I did not notice the problem when I edited the sequence in the first, it's Speedgrade I noticed it first, and it now appears first.

I don't know what could cause this problem. I have never worked with before adjustment layers and do not know much about them. Is there something I don't know that I should?

Cameron

Note: I use versions CC 14 of these two programs.

Cameron,

Don't forget that in the layer stacking on a clip in its layer panel or stacking layers adjustment and pliers of ranking or simply complementary or bottom-third/titles above the clip base, the top rail is what is 'seen' with the exception of any transparency you set for him. Put a black layer on top, you haven't seen anything below him... until you give transparency to the layer above.

Adjustment layers stack (that I use all the time DL PrPro-Sg) with heavy changes that cause issues in transitions... GETS very complicated to adjust the opacity of the adjustment layers as you stack them. I've done it a few times... but it's so much faster to keep these kinds of adjustments on the clip base.

Neil

Tags: Premiere

Similar Questions

Why teststand cannot display the ASCII character which number up to 128?

Hi all

I encountered a problem on an application for ASCII characters, why teststand cannot display the ASCII character which number up to 128?

For example: an expression Local.xx = Chr (164).

XX--> chain, can't do the correct string.

An idea for this?

OS: WinXP, SP1 Teststand2012.

Thank you very much.

TestStand uses encodings multibyte code page, that you have defined for the operating system-based. If you are using a code page that requires multibyte characters, you should also make sure that you have the Options of Station-> location-> parameter Regcognize multi-byte characters is enabled.

On Windows 7, at least, the code page of the operating system setting is located in the control panel "Region and language" in the "Administration" tab where it says "language for non-Unicode programs".

Hope this helps,

-Doug

Why will not display the nested div CSS properties?

I am configuring a zone of activity featured on a home page. It should show on the slide show images. I made sure the values of z-index of the event box divs are much higher than the slide show. The external div (.featuredEvent-wrapper) does NOT display the background color assigned to it, no matter what I try. The internal div (.boxEvent star) does not - the color of police, police-family or text-shadow, and the only way I could get it to align the text to the Center was by assigning that to the wrapper).
Here is the page showing the text to the right of the main logo of the event, but lack the background color dark: http://nottoway.com/index-test.htm

This is the same page, but when the slideshow is disabled so that you can see where the text is: http://Nottoway.com/index-test-bare.htm
I have also attached 2 screenshots, one of the design view in Dreamweaver (CC 2015.1), which shows what should look like the box and the second showing what he looks like downloaded online (and also in Live View mode). The HTML and CSS code are below.

Any help that anyone can give me on this will be greatly appreciated!
Thank you very much
Robin
HTML:
< div class = "wrapperMAIN" >
< div class = "wrapperTopSection" >
< div class = "slideshow" >... < / div >
< div class = "POLYPOLE-BlackBar" >...
< div class = "wrapperNav-hand" >... < / div >
< / div ><!-end-POLYPOLE-BlackBar->
< div class = "logoHome-wrapper" >... < / div >
"< div class ="featuredEvent-wrapper' > '.
"< div class ="boxEvent-star"> < br > < strong > MURDER MYSTERY < span style =" font size: 17px "> Theater </span > < / strong > < br > < br > < strong Saturday > < br > < span style =" font size: 17px "> 30 January </span > < / strong > < br > < br > < style ="font-size"em : 16px "> Details < /em > < / div >"
< / div ><!-end-featuredEvent-wrapper->

< / div ><!-end-wrapperTopSec->

CSS:

{.wrapperMAIN}
float: none;
height: auto;
Width: 100%;
display: block;
Clear: none;
left margin: auto;
margin-right: auto;
position: relative;
}
{.wrapperTopSection}
margin-right: auto;
Width: auto;
height: auto;
Width: 100%;
display: block;
border-width: 0px;
position: relative;
float: none;
Clear: both;
margin-top: none;
left margin: auto;
}
{.featuredEvent-wrapper
Width: 1020px;
height: auto;
text-decoration: none;
text-align: center;
float: none;
Clear: none;
display: block;
position: absolute;
right: 7%;
top: 100px;
top of the margin: 20px;
z index: 6000;
}
{.boxEvent-star
position: relative;
Width: 200px;
height: auto;
display: block;
float: right;
Clear: none;
Top: 1px;
z index: 6400;
top of the margin: 16px;
padding-top: 25px;
padding-bottom: 25px;
color: rgba (255,255,255,1.00);
Police-family: display playfair, Georgia;
do-size: 16px;
text-align: center;
text-decoration: none;
text-shadow: 3px 3px 3px rgba (0,0,0,.8);
background-color: rgba (0,0,0,.8);
Overflow-y: auto;
}

Oh, you did allright. I found class .boxEvent-featured towards the end of the mainStylesheet.css.

But there's another bug:

A '} ' missing and, therefore, the browser is not made all the following lines.

Look here:

Fenja

Why a transition plays the role of a video that I cut on?

I have a clip video, followed by a photo. The video was cut to finish exactly where I wanted it. What he does during playback. At the end of the video clip, the image appears. I wanted to transition, so I put in a fade. When faints in the video, he plays the video on that I had cut. I had the same problem with the transition to dissolve. I tried to simply choose the "good clip" option on the transition, but she still video plays beyond the point that I was initially arrested. Using the 'window - Info', I see the time of beginning, end and duration remain the same for the video clip before and after the transition, but it's more than he should play.
Someone knows how to fix this? Thank you.

Rick

What is the duration of your video transition... the default 1 second or less or others?

What are you using - chained and namely quoted, what else?

Alignments video transition (Clip on the left, between the Clips, Clip on the right), you apparently tried between Clips and Clip of law.

Have you tried left Clip? That seems to work for me in the interesting situation that you present.

RTA

addChild() display the Clip outside the parent company

Hello
I use the addChild() method to add a nother of Slim Movie Clip we.
MC1. AddChild (MC2);
But once the Clip is added (and the second Clip is higher than the first) and then it is displayed outside the first Clip. Is there a way to prevent to display outside the parent company?
Thanks in advance,
Joe

Not quite sure what you mean. If you mean you want to restrict the edges of the additional child to stay inside the mother, then you'll want to use a mask. If this isn't the problem, please explain better.

Why firefox 15 displays the hex of size for the html data that make up the page?

Windows 7, 32-bit
Firefox 15.0.1 update Friday
Java 1.7.0_07 Friday update

Management forced a Java Update and restart on Friday. When Firefox started it auto-updated V15.0.1. He had problems immediately; the previous session tabs disappeared all and any page with Flash no longer worked (everything was OK before the two updates).

In the recommendations, I created a new profile, copy only on bookmarks and files with name of user/authentication of the previous profile. When manually reopen the necessary tabs, pointed out that any Sonicwall firewall and Panasonic Netcam both display only a blank page with one or more hexadecimal numbers on it.

Efforts to repair since included completely remove Firefox, the plugin Flash and current Java to run in safe mode, disabling all extensions/plugins, running in a completely default new profile with nothing carried over, try with and without hardware acceleration, etc. The behavior does not change. It does not matter if I go via http or https for devices that support both.

JavaScript IS enabled, and the script _no_ blocking is in place; JavaScript works on other sites that use it.

IE9 on the same PC works fine, so it's apparently not a system problem

Looking at the page source shows that hexadecimal numbers are the length of the data in the row or the piece of HTML code, including the following javascript code. The Sonicwall sets up a larger number (2ea) on the line of the display source page that corresponds to the size in bytes of the code in the following lines.

The Panasonic apparently sends the length of the data in each row if it provides a hexadecimal number for each line of HTML in the source display.

What would make Firefox interpret the data incoming size as displayed, but only for certain pages or peripheral? I can visit other sites that have javascript and they work; a source of these pages view shows all the lines with just a hexadecimal number.

view source example of Sonicwall (between the = lines); everything you see on the screen is the "2ea" in the upper left corner

=
```
2ea
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
	<meta name="SonicWALL Administrator" content="Copyright 2004 (c) SonicWALL, Inc. All rights reserved.">
	<title>SonicWALL - Authentication</title>
	<meta name="id" content="auth" >
	<script type="text/JavaScript">
	
	</script>
</head>
<frameset rows="*,1">
	<frame src="auth1.html" name="authFrm" noresize scrolling="no">
	<frame src="emptyView4.html" name="authTgtFrm" noresize scrolling="no">
</frameset>
</html>
=====

View source sample from the Panasonic; the blank lines are displayed as such in the view source screen.  All you see in the browser window is the series of hex numbers separated by a space on the same line.

=====
0

3b
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Frameset//EN">

8
<HTML>

7
<HEAD>

28
<META HTTP-EQUIV="expires" CONTENT="0">

2e
<META HTTP-EQUIV="Pragma" CONTENT="no-cache">

35
<META HTTP-EQUIV="Cache-Control" CONTENT="no-cache">

24
<META NAME="robots" CONTENT="none">

30
<META NAME="robots" CONTENT="noindex,nofollow">

29
<META NAME="robots" CONTENT="noarchive">

15
<TITLE>Start</TITLE>

8
</HEAD>

3d
<FRAMESET border=0 frameSpacing=0 rows=30,8,* frameBorder=0>

4c
<FRAME name=bar src="CgiTagMenu?page=Top&Language=0" scrolling=no NORESIZE>

3c
<FRAME name=hrbar src="BarFoot.html" scrolling=no NORESIZE>

27
<FRAME name=body src="Top?Language=0">

c
</FRAMESET>

9
</HTML>
=====
```
Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if it works better.

Why can not display the links or banners in FF, but I can't do in other browsers?

I don't see all of my Google ads, banners, links or product on FF but I can visualize in Google Chrome and IE. I cleaned and deleted everything and updated and I still don't see them.

In order to be able to find the right solution to your problem, we need a few more non-personal on your part do the information as follows:
- Click on the Firefox button in the top left, then click on the help menu and select troubleshooting information in the submenu. If you do not have a Firefox button, click Help on the top menu and select troubleshooting information in the menu.
Now, should open a new tab containing your troubleshooting information.
- At the top of the page, you should see a button that says "copy the text to the Clipboard. Until it clicks.
- Now, go back to your post on the forum and click inside the box to answer. Press Ctrl + V to paste all of the information that you copied in the post on the forum.
If you would like more information on the troubleshooting information page, please read the article, use the troubleshooting information to help solve the problems of Firefox.

Thank you in advance for your help!

Why does not display the display name on posts instead of the username? How can I deprived to change my name?

Is this possible without the info display?

The display name appears only on your profile page.

Yours is here:
https://support.Mozilla.org/en-us/user/709829

If you want to change the display name, go here:

https://support.Mozilla.org/en-us/users/edit

Why schedule prompt displays the time (I need day only)?

Hi all
my need is to create invites simple calendar for my analysis.
The problem is that prompt displays also the time that I need only date.
Please see screenshots:
This is right:
http://S22.postimg.org/9x1semoep/BI_calendar_right.PNG
This is false:
http://S12.postimg.org/z4befjn31/BI_calendar_wrong.PNG
How can I create calendar guest without time?

The problem is in the column data type.

It helped me:

Cast (expr As date)

Why does not display the image in the document window?

I'm a Photoshop CS5 begI tried to pick up what I need to click on the button. I can see the name of the document in the window, but there is no image to display in the window. Get bit frustrated. Help, please.
Thank you.

The document is 100%, so I think it's another driver to map video to date with a bug.

Go to the one indicated on the web site GPU (or Microsoft, or system manufacturer) and search for updated drivers.

Why lsnrctl status displays the services that are not in listener.ora?

I have a database 10g on Solaris 9.
When I do "lsnrctl status" I get the following:
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on July 29, 2015 11:46:30
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=cees2) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
For Solaris TNSLSNR version: Version 10.2.0.5.0 - Production
Start date July 14, 2015 07:52:31
Availability 15 days 3 h 53 min 59 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /oracle/tns/listener.ora file
The listener log file /Oracle/OraHome/10.2/network/log/listener.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=cees2) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service "FEC" has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
Service 'ceesXDB' has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
Service 'cees_XPT' has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
The command completed successfully
And here is the content of the listener.ora file:
##############################################################################
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cees2) (PORT = 1521))
)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC))
)
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = oracle/OraHome/10.2)
(= Extproc PROGRAM)
)
)
My question is where are the EEHC, ceesXDB and cees_XPT services if they are not defined in the listener.ora file?
Thank you
Michael

Try this search string in your favorite browser:

listening service Oracle xdb

Any ideas as to why unable to display the new folio in Content Viewer?

The content viewer is a novelty and tools DPS (running InD CS6). Able to create folio with the generator of folio and view with the desktop but preview never shows up in the content viewer.
Thanks in advance for any help.

Thank you, Neil. Finally someone to Support Adobe's call me and understand the problem with a return to the screen. I can't tell you exactly what the problem was but they changed the suffix on some preference files and that seemed to do the trick. Thanks for the help.

Why can not display the PSD thumbnail in windows Explorer 8

Hello
Nice day.
I have a problem, as I just installed the 8 House window and the CC of Photoshop, but I can't view thumbnail in windows Explorer PSD 8.
Has anyone have the same problem?
Thank you.

Settle in the Photoshop forum.

You can 'favorite' clips and have an option to display the clips in the project Panel are currently in a sequence?

Someone at - it ideas on the above questions?

You can set how folders open in preferences.

Why the clip in my sequence to become selected when I stop playing or click the sequence marker?

Hello
First post! Woohoo!
Not sure why some of my sequences make this. I'll try to make that clear as possible, but try to put this in words could be confusing. Apologies in advance.
When Hi hit game the clip in the sequence is not selected (highlighted) and when I stop playing, it is selected (highlighted).
Why is this super frustrating?
I have markers in the sequence. (and I don't have or don't want markers on my clip).
I have my window open markers and I want to read/edit comments for my markers.
BUT when playback stops, the clip in the timeline panel is selected, then my window markers swaps to the source clip
and then I need to re - select the sequence for my markers window window display the details of the marker.
And worse still, sometimes when my sequence is selected (see my bearings in the markers window), when I click in the comments box to type in a description, me clicking on which comments on the box says actually the element in the sequence that is causing my markers window Exchange back to display the clip markers (once again - I don't not wishes to add markers of my clips I want only that they in the sequence).
And it's incompatible. Sometimes it works first try, sometimes it works 3rd test.
This is not the first time that I have worked in this way, and I don't remember this issue previously.
Side note: I use a multicam in mu sequence clip.
Any help would be greatly appreciated! I like dropping the interviews in this way and I really want to keep this workflow.
Thank you!

Disable

Why my transitions display the wrong part of the clip?

Similar Questions

=

Maybe you are looking for