Why the clip in my sequence to become selected when I stop playing or click the sequence marker?

Similar Questions

• When I stop playing, the source monitor goes black. It does not show a still image after pausing.

  I just got a HP Prodesktop 400 G1 MT, Intel core I7 processor. In first 8 adobe, when I stop the video playback, the source monitor and program monitor won't give me a fixed image. As soon as the video is stopped, the screen is empty while normally, they would be in a freeze frame. the computer has an AMD radeon graphics card. I have two pc for dual monitors. I tried to play with the settings of reading to the premier, but no luck. I'm about to take the computer to be recovered. Any suggestions?

  Hello! Thank you for responding. I'm currently doing an update for my AMD display driver, and it is up to date. I called tech support and they helped me in the question of fixing from the option menu file - rendered video - general - project settings and playback - selecting mercury playback engine software only option. My computer was set to the GPU acceleration engine. It works fine now. Thanks.Aldo

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• Context of the sequence becomes invalid when the runtime is longer

  I have a sequence that loop for about 70 k iterations (which is pretty huge). The sequence called a subsequence where the inhabitants of the sequence called are modified. Question is, around 65 th iteration k, I get an error message indicating that the reference of the local past is invalid. The number of iterations when the error occurs varies from one computer to another, but always in the 65 k range. When I try to run another sequence (a single) consecutively, I get an "out of memory" error I guess the reason why the local reference is not valid because TS execution stops when the memory TS gets the complete decision-making context of sequence and therefore the reference local section not valid.

  I would like to know how to reduce the consumption of memory of TS because I disabled the result of record for all the result of sequences (Configure-> Options of Station-> run), disabled registration for each iteration of the loop, optimize no reentrant calls thi sequence is also enabled. I even tested with just this sequence of sequence and I wonder if there is a maximum number of threads of execution when a loop.

  PC configuration

  RAM-12 GB

  LabVIEW and Teststand 2010 SP1

  I will not be able to view the code, but the closure is a custom step which has sequence call as its adapter.

  Hello

  I tried this:

  Main sequence called a sub sequence, which includes 3 stages of instruction.

  I have a loop sequence sup to 75 k with result logging enabled.

  TS runs successfully - no problems.

  Try to jump steps (one at a time) in the sequence of sub to know at what stage leads to this question.

  Also try to reproduce using a simple sequence (that you can post online).

  Ravi

• Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.

  Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.  I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback.  Itself doesn't freeze, I am able to go into my settings and change again within the sequence.  It's only the source monitor.  Anyone know this problem and is there a solution?  Thank you!  My apologies if this has already been discussed in another post.

  I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.

  Under the key sequence, uncheck preview Composite during Trim.

• Is there a way to follow both in the clip (not in sequence) are you in?

  I would try to explain this, as much as I can and make sense.

  I saw a video clip and I liked everything, let's say the: 30 mark at the minute mark. Then I import into first.

  However, when I put it at the end of the next clip, it shows the time for the entire sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) avoiding to do the math? It's doable, but it seems a bit tedious.

  Want to "set the record straight" so to speak when working on individual clips in the timeline.

  Choose change points in the Source monitor before inserting it in the sequence.

  You can see the duration of the In and out in the monitor.

• Why my clips/exit points have moved / "slips" in my calendar. Why some people have a zebra pattern?

  I try to open an existing in Prime CC 2015 project file that contains a final assembly locked for a video clip. When I open the project, it displays the correct cuts that were made, but all the clips seem to have substantially been moved as if someone used the tool to slide on videos. Each clip is cut to the song specifically and I'm sure it's the same source/clip file that is displayed, but they are simply passed and I noticed when I tried to export a XML to open to davinci Resolve for color, but then when I've seen this I came first and they were already screwed up. Now, I noticed that it didn't happen at the opening of the source of the original project folder car that I copied the above project file of. It opens up very well with the right of entrance/exit points on the original drive but not the folder copied on my personal drive (do not know if it matters or not). Clips have also this Zebra looking pattern on the bottom half of the clip on the timeline. The portions clips that are now "Zebra would be" do not appear on the video preview. (Essentially the sequence opens well, clips were not moved in time [time code is the same thing], but simply clips to the point now is earlier or later in the clip from the source which is basically as the tool to slide in first) Im not sure what is happening but lately first has also been crashing a lot on me today. He did not cooperate with regard to the loading of the images (kept showing yellow sign "Waiting Images" on the Preview Panel) I have not updated my OS recently but it seems that 2015 is not a reliable updated. But if someone could help me please correct the staggered/sliding clips in my calendar, perhaps more explain what means "part Zebra" on some clips? I am on a period in which this project is due to a contest in 2 days so any quick response would be much appreciated!

  I fixed it all! So, something I did not mention was that I'm working on a sequence of 24 p with several sequences of frame rate. The problem here is that footage has been interpreted to conform to the 24 frames per second. Now, when I copied the project file and sequences of original on my personal, normally first disk drive will wonder where the source files are gone. So you need to find the images in the new folder/location. This entire problem could have been avoided if I had ticked the ' preserve interpreted Footage ' box right next to "locate images. That ends up being the reason why the clips have been moved, simply because they were cut for idling and when read at full speed, the clip is seemed to have "evolved" or display a zebra striped pattern which means there was no more video to be displayed in the source file. Once footage has been interpreted to 24 fps, each matching item back to our final Assembly, we worked so hard! Sick leave this post here in case where someone else is not catch their error does not preserve that interpreted data images.

• Why the CTI will not go away from the next?

  Hi all experts,

  I want to assure you that all my clips are aligned side by side without gap. I voluntarily leave a slight space between 8 & 9 clip and move my left & placed CTI on clip 2 (ie the left opening)

  So I test the function sequence > Goto Gap > following in the sequence but the CTI does not move!

  Why the CTI doesn't move right away between the clip 8 & 9 clip?

  Any ideas?

  Thank you

  Previous/next in the sequence will work only if there is a gap through all the titles in a sequence, video and audio. Instead, try next/previous on the track and make sure all (or part) of your tracks are targeted in the headers of the track.

• Why the exported films are letterboxed?

  I watch the video clips that I imported into my computer, and they are the same proportions that my screen, it fills when I choose to play in full screen. However, once I put the video in the first and then export it, the video would become Letterbox, as well vertically than horizontally, so that when I play in full screen, the video is smaller and surrounded by a black frame.

  Why would he do that? And how can I change so that it stops Letterbox my movies? Any help would be appreciated.

  PS I don't really know if this is still considered black bands.

  This is usually caused by a mismatch your project settings with your source video or using the incorrect output parameters.

  What type of camera did this video come from and how did you in your computer?

  What settings you selected when you started your Premiere Elements project?

• Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  I have a second clip 24 I have stratified in Ps and when I import the psd in Pr THE SEQUENCE IS STILL ONLY 10 SECONDS!

  How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (certainly that's an AV class where I learn just PR.  "But I can learn VERY QUICKLY!)

  Thanks for your help.

  -OSXniCKels

  Just in case I wasn't clear in my last line ' just click-and - drag on the tail of your.» PSD to set the desired time,' once you have imported your. Just PSD (for example, images), you can drag in the timeline panel, click and drag on the right margin (the tail) and stretch his time because it takes.

  Now, if you have imported as a sequence, open the timeline of the sequence and do the same thing.

  Normally, I will put my Edit > Preferences > again I think will be applicable, make my Import, and then with the Info Panel, just change the duration in office.

  Good luck

  Hunt

  PS - Welcome to the forum.

• We will search for answerswhen I download a mp4 file of say 10 MB, the download folder is no indication that say 6 Mo sometimes, why the full wire is not registered?

  When I download an of say 10 MB mp4 file, download file watch only say 6 Mo sometimes, why the full file is not registered?
  This problem occurs only in a few cases 5 percent if I d/l new and get the complete file

  Hi, Zjpz,

  What version of Internet Explorer you are using-

  Change in size/content of the file during the transfer is the typical result of the use of text transfer mode. With mode, the sequence of characters to delimit lines in the text file is changed. Under Windows, the sequence has two bytes, then to a single byte on Unix. Where the change in file size.

  http://WinSCP.NET/Eng/docs/faq_transfer_size_change

  Why changes in the size of file after the download of video/Audio

  I would like to develop the explanation using a type of FLV video file for example. For the above example image, the size of the original file was 9,88 MB and the video format is FLV - which is a Flash video. This type of video is super compressed to save bandwidth and streams of the fastest video on a computer. During the process of re-encoding, it is off compression first before it is re-encoded. Output size is dependent on the type of media file that you download, you will notice little change downloading format that uses less compression method.

  http://support.kajabi.com/entries/414037-why-does-the-file-size-changes-after-uploading-video-audio

• I started editing in 720 p, that's why all my shots are zoomed. And now, when I changed it to 1080 p, it becomes pixelated.

  I made a very tragic mistake. I started editing in 720 p, that's why all my shots are zoomed. And now, when I changed it to 1080 p, it becomes pixelated.what can I do? Is it possible to fix it? or do I have to re - edit the entire thing yet...

  Hi Please help me for my presentation! Really enjoyed

  [title published by mod]

  You should probably uncheck you scale to the size of the image.

• When I add new clips on my sequence on any project, audio stands

  When I add new clips on my sequence on any project, the audio appears on the bars of the sequence. When I drag a clip on a new project to create the sequence, the video and audio appear as usual, but when I drag any other clips the same thing happens (where the audio does.) I tried to uninstall adobe first pro and put it back (and reset all settings) and this has not fixed the problem. Anyone has any ideas to fix this?

  Hi Vasilios,

  Your tracks are not properly patched. On your screenshot, V1 is not targeted. Click on where it says V1 and try again.

  Thank you

  Kevin

• Why the Build button is grayed out?

  CS 5.5 MC, S & T ed. Yet 5.1. Win7Pro64.

  My first attempt using again. Try to burn a project Premiere Pro 30 minutes of a / v clips and photos on a DVD SD without creating a directory. Want just the movie DVD + RW burned to play instantly.
  Follow the instructions in step 6 that is to click Build, but it is grayed out. I registered this sequel in 2012. What I don't understand?
  It might have something to do with settings in the properties panel? I'm not sure they should be, because they are not addressed in 5 steps. In any case, I clicked project check and got 2 errors, so I put the first Stop, play the same as the title button. Chronology of the hand is not defined. Operations: No permit. Had no error when I clicked on project to check again.
  Also, as suggested in another post, I tried to change out of build Panel to record DVD and Image, but generate button is still gray.
  I accepted all settings by default when the release was made on a DVD disc.

  The panels menus and timelines are empty. Not transcoded first Pro Sequence.prproj 1920 x 1080, 59,94 frames per second is on the project Panel. The miniature film plays normally on the project Panel. Flowchart panel shows a DVD icon.

  In addition, in the project settings dialog box, the name: Unitilted.ncor is grayed out. I don't know how to change this name.

  Thank you

  What are the instructions you follow?

  If your editing panel is empty, you have no chronology of l. And some of what you set (for example 'first reading' 'Stop') is incorrect. When you want a DVD with no menu and play the video at the start, you set the first play on your Timeline.

  Once you create the project again, you can no longer change its name. You can do a save as and change it.

  In the project Panel, select the order of Professor go in the menu timeline, and then create the timeline. Set the action to the end of the new timeline 'Stop' if that's what you want, or to himself if you want to keep repeating.

• Export multiple clips from a sequence as separate files.

  Hello fellow editors!

  I have about 100 + video files I want to cut into shorter clips, change a little and then export in a Final Cut friendly format (currently these are AVCHD mts files) to send it to my friend, who is putting the entire movie together.
  I don't want to use Final Cut for that (I can't, I have a windows machine) and I expect to work with the premier CC and media encoder CC.
  There is a way to put all the clips in a single sequence and nesting then each of them, then you can send them to the CC encoder and it will make them as separate files - it's simply not very productive, interweaving clips one by one and it takes forever to encode import sequences.

  I was wondering if there is a workflow better? I heard that Final Cut has shortcuts to do this very easily, you just click on all these clips in sequence and "batch export", which puts them in a certain place as separate, already cut files. ?

  No matter what? "I love the Prime Minister, my feelings be justified!)

  Hi Nik,

  Place the clips in a sequence and trim if you wish. Select the clips in the timeline panel, and then drag them into a bin. In the bin, select all the clips and choose file > export > Media. Choose your export settings, then you can transcode the all in one go. If you have the FCP installed, you can use the ProRes codecs. You might consider ProRes 422 for this.

  Hope that helps,

  Kevin