Why my wifi connection does not work correctly?

Similar Questions

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.

• TCP IP multi client connection does not work correctly

  My program is a software communication client server where data of a cDaq collector server sends data to the client, and the client sends the command to the server to run. The problem I've encountered is when I sedn a command to the server, it shows that the server is receiving but it it is not running properly. Please take a look and see where I was wrong. I was stuck on this during some time. After this post, I'll add the subvis more

  Note to admin - screws removed by the request of the user.

  Missing Untitled 1 library.

  What does "not execute properly" mean?  What is it to do or not to do, and what you expect it to do?

  I see a problem in the Subvi the TCP - IP protocol client.  Why are you enqueueing an element then immediately made it?  You go to the queue again after the end of the Subvi.  But you have a loop in parallel when remove you the element.  You have a race condition.  Two things can happen.

  1. data gets in queue and removed inside the Subvi.  When it ends, it gets queued again in the same queue.  Then the parallel loop might it dequeue and work with it.  I'm guessing that if this order of execution occurs, it probably behave correctly for you.

  GOLD.

  2. data gets queued inside the Subvi.  The parallel loop with the dequeue is sitting there waiting for something, removes the element and works with.  Then the dequeue inside the Subvi that's always waiting for an element in the queue who won't, because now you have locked the code.  The loop cannot iterate to get more and more data in the queue.

  You have a lot of strange queue operations past in this sub - VI and an another Subvi in the parallel loop.  Why you get another reference to the queue, rinsing, then release this reference to queue.  I won't even try to guess how that would complicate the 2 scenarios, I already listed above.

  I offer several examples of queue to understand how they work.  Any given queue must have 1 wait operation, otherwise remove it will run to steal the other's data.

• Satellite L30: WiFi connection does not work with wanadoo box

  I bought a L30 for my daughter for Christmas and wants all ready to go on the day, so have tried to connect to my wanadoo wireless & talk.

  Unfortunately, the laptop wireless card doesn't seem to work. He acknowledges the wanadoo box and tries to connect, but when I enter the WEP key, it searches the network for a few minutes then returns to the "If you want to connect to this network, select 'connect' page."

  I took the adapter wireless to my PC, connected to the laptop, loaded the software wanadoo wireless and connected to the Internet wireless with no problem at all. The problem seems to be with the connection itself - as the laptop detects the wireless network very easily, it just cannot connect.

  I'm not an expert and do not want to 'break' the Christmas gift from my daughter. It is too late to guarantee a replacement arrived, I have to go out & buy a wireless adapter, but deliberately, I bought a laptop with wi - fi, if deeply resent what of not working. I feel so stupid.

  Help, please!

  Hello

  Sometimes it of not possible to connect the wireless network adapter to the router because of the compatibility.
  I have a similar problem with my second notebook at home. The card is compatible with A and B WLan standard but the router support B and G.
  The WLan card is not able to connect to my router.

  However, I think that if the laptop recognizes your wireless LAN, it should be able to connect it. You can try to update the WLan driver and additional test with encryption settings disabled.

• Why adobe watermark connection does not work with Windows 10?

  I have install Windows 10 in my computer and now does not have the watermark of buffering! My photoshop is CS5...

  anyone has any ideas to solve the problem?

  Sorry for my English

  Sonia

  Have you tried a reset of the watermark Panel preferences?

  

  Have you tried to reinstall the watermark Panel?

• MFP M175nw + Speedport W 724V (Telekom) - WIFI connection does not work after replacement of the router

  Hello community,
  
  My parents at home to replace their router with a newer model (Speedport W 724 V Telekom, German) due to an electrical fault.
  
  Until printing today via WIFI on the 100 HP LaserJet M175nw MFP color worked like a charm. But now, there is no link with the new router via WIFI and it is not possible to connect by using WPS (they really tried everything). Just connect and print via USB in Windows 7 works... But they need to print from iOS (iPad) devices.
  
  I went through the terrible (long) manual - to discover that it may be a problem with the WIFI (ad hoc/infrastructure) connection method. But my parents were not able to change this method.
  
  I would therefore ask you help on the following:
  -How can I change the method of connection and connect the printer using WPS?
  -How can I reset the printer completely (reset to default values)?
  -How to print the configuration menu? I googled and it said to push the Cancel button (X) for more than 5 seconds to print this page. Is this correct?
  -How to find out the IP address of the printer to access webadmin interface? I have now, there is a, because it is mentioned in a ubuntu forum: http://ubuntuforums.org/showthread.php?t=2193532
  - And finally: how to do a firmware update? It seems that there is a newer version available on that model and some said that connection problems could be resolved by upgrading the firmware.
  
  Please answer detailed possible, as I don't have much experience with Windows & PC in general.
  
  Thank you all for your support
  Dominik
  --

  Hi DominikBach ,

  Here is this document in German for you. At the bottom of the left side of the page, there is a drop down to select the language next to the country.

  The Druckers as ein kabelgebundenes oder ein Drahtlosnetzwerk einrichten.

  Thank you.

• In windows Vista (Home Premium) Remote Desktop connection does not work correctly

  I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
  Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

  I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

  Can anyone help?  I've attached a screenshot of what I see in vista.

  You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

  It is not an 'idea' it's hard cold fact that is at least 12 years old.

• Why the breadcrumbs module does not work correctly

  It is probably a pretty simple answer.

  So I added the breadcumbs module to one of my site templates for better navigation of the user. But he only like half of the work, if you click on the Home link that takes you to the home page. That works well if you go just a page in the site. But if you select a catalog and then go the great view of product, bread will not show (host - largeview) with the original being the only one linking, you can click on. When it should be (Home - Catalog - largview) and the House and the catalog would be links to the appropriate pages.

  Here is my code to add the breadcrumbs module to the template...

  < div class = "Home-link" > < a href = "/" > home & raquo; < /a > < / div >

  < div class = "bread crumbs" > {module_breadcrumbs, & raquo ;} < br / >}

  < / div >

  If someone could tell me where I made the mistake or a work around for this problem that would be great... Thank you very much...

  You should be able to get away with one for e-commerce. Use navigation than Liam mentioned tags to add your products and catalogs to the bread crumbs. Anything before the catalog must be hard-coded.

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.